This is an installation guide for the SUPER5 OLED Standard Upgrade Kit. More Info: retroremake.co/ Socials Twitter: / takiudon_ My Discord: / discord IG: / takiudon
Could you shed a bit of light on how the HDMI kit will be installed? The oled/touch/hdmi kit I ordered says that there are no shell modifications necessary and no soldering required. How's that possible?
@@LeBoomStudios thats a really good question. Ordered the same... still trying to figure out how they do it. Somehow access test points, replacing game card slot or headphone jack ... hmmmmmmm
@@urubarin3966 The headphone jack would be way too small, even for micro HDMI. The Gamecard slot would be a nice idea, since mine is modded anyway. So either that or the description is just copy+paste for all of the kits and a bit of actual soldering is needed. From what I've heard, the USB Type-C controller is the same as on the OG Switch, just wirhout the additional DP-Alt controller IC. As such, it should support video output and it should be possible to directly route the display output to the unused pins.
Got mine last week - installed in about an hour with me being very careful and organized. Had to double check my power connections when it didn't turn on at first, but worked great once I had double checked my work. Looks great - highly recommend for anyone with a lite!
Atomic Purple Mega Kit ordered. No reason to pry my brand new screen out of my refurbished Lite with this shell kit. ❤️ The fact that it includes a hard case, new battery, hall effect joysticks and button replacements is just so much value!
Just received my screen a few days ago, just wanted to note, I followed this video and it was super easy to install and the results are outstanding. Thanks!
@@droo3010 Mario maker 2 and Mario 3d world/bowsers fury are my main 2. Plus I would rather pay 10$ extra with a promo code to keep all the original features of the screen.
@droo3010 it's not necessary, more of a convenience. Switch games are able to be played in "Docked" mode on a television, with a controller, not by touching the screen. Which is actually what makes this so interesting... its simple. Do I really need a touch screen? I'll be very curious to see a touch screen tutorial as well before purchasing.
@@droo3010Touch screen is faster than buttons for menus and is very useful when you have broken buttons too. I wouldn’t buy an Oled screen for the Switch Lite if it doesn’t come with Touch functionality, but other people may.
Installed mine today, great packaging, nice tools and amazing screen. Patience is key to install it. I really love the switch lite for its perfect size but always been annoyed by its weak screen. Now I have the perfect portable console 😄, thank you!
@@Joelwilldoit you need SUPER5 OLED - Standard Upgrade Kit (Compatible with Stock Digitizer) currently sold out to be able to use your current touch panel, however color is not matched.
Looks simple enough but you might want to touch on thermal paste in the next video - You didn't replace any between the heatshield and the copper pipe; seems like too much paste left the build when removing the old heatshield.
In all fairness, having repaired so many switch systems myself, you never really need to. The soc used in it is so lower power that it doesn't need much thermal paste. I've not ever replaced it except the first system I did and it's not been an issue. You'd only really need to do that if you were modding and overclocking.
@@lieutent2654 for those who plan on opening up their consoles multiple times, would it be advisable to replace the thermal paste with a thermal pad for less mess? Or better to stick with the paste?
@@lieutent2654 he put the plate direct down with zero paste between the backplate and heat pipe . Is it fine to not add anything at all ? I'm talking about the paste on top of the heat pipe that touches the back metal shell
@@droo3010 No, always add paste. The stuff that goes between the top of the heat pipe and the metal shielding is more of a thermal putty, which is thicker.
@@inclinerd I don't recommend a thermal pad. It may be possible to get the right size but I tried a thermal pad in place of the thermal putty on the top of the heat pipe, and the Switch Lite seemed to run hotter afterwards. Underneath the heat pipe and underneath the APU's shielding, you should definitely use thermal paste, as even a thin thermal pad will be too thick and could cause warping that could crack the PCB.
Mine arrived yesterday, was super simple to install… though the old screen was much harder to get out than I thought 😅 The screen looks fantastic in person though! And the colour match is great too, you’d never know until you turn it on that the screen isn’t the one that came with the system. It’s perfect! And now my Switch lite is the best portable little system!
So great to finally see what's involved. Many, many hours of hard work I suspect 👌🏼 Would you consider putting together a SKU aimed at installers, without the additional tools and maybe some incentives for bulk purchases?
That makes two of us. I am not handy at all, so rather than potentially bricking my life, I’m trying to figure out if I can handle this with a detailed tutorial or if I need to go to a computer/mobile technician to do it.
Just got mine installed. Overall, pretty easy. Then I thought for a moment that I made myself a situation by not waiting for the touch version when I seen the hekate display and realized I couldn't navigate it with touch and the controllers doesn't work normally. Good thing I realized that the joy con can be used like a mouse ;)
I think this is my next hardware project. Has to be easier to work with than the iPod Classic and 3DS units I've worked on recently. Looking forward to seeing instructions for the touch panel option!
I did both, and didn’t notice a difference either way. If you just take the heatsink and shield off and put it aside without disturbing the paste it’s fine, but new thermal paste is like 2$ so I would just replace it.
This is very well thought out product. it would be cool to see something like this on original switch models, which would make for easier software modding.
Great guide but the custom metal shielding and the custom flexpcb dont line up. One of my buttons on it is under the shielding because the prototype has horizontal buttons where the final has vertical
It’s kind of disappointing to be honest lol. But its still an oled screen. I cant really tell the differences when I press the buttons to change the display.
I had this too. It doesn't seem to actually press down on the button under the shield and I think the shield could be modified to accommodate the vertical buttons, but probably we should just get new shields sent out to us (or boards with horizontal buttons.)
Very cool, and looks pretty easy and straight forward. Kinda stinks you lose touch functionality but i suppose i hardly ever use it anyways lol. Look forward to seeing the next video!
I hope one day there's a Super 7 for original switch owners, I just don't feel confident enough to install a jailbreak kit in a Switch OLED, but a screen swap seems more safe.
Looks so awesome - also pulled the trigger on the mega pack. Hyped since you startet your first teaser 😊 Looking forward for you handheld release aswell. Since you announced it, I've been thinking about selling my second analogue pocket. You really can't beat the price-performance ratio you offer. In contrast to analogue, you are also available for questions or suggestions❤
Taki. Thank you so much for the mod and instruction video. Im waiting on the hdmi no touch version prior to purchase. Nvm just ordered 2 mega kits... 😂
I don't know, if ther'll be a touch version, but if you want one today, you can delaminate the oled screen from the glass (with a very thin wire - around 0,04mm, heat and maybe some ipa), clean it, put loca on it and laminate it to the digitizer from the switch lite. Finicky, and you can damage the screen if you don't do it right, but you would have touch.
thanks for the video, i wouldnt mind just buying a new shell and transferring all the guts over to the new shell with a new screen to avoid the whole removing screen part from the old shell.
What are your thoughts on the availability of this screen mod? I wondered if you had any info on the quantity available as well as whether or not you think Nintendo could strike their hands upon it. I know it’s not doing anything against them but they have been extremely forceful in being the only source for products that are even remotely related to Nintendo. Thanks for this tutorial! I’ve been waiting for so long to see it!
I doubt Nintendo does anything considering how many third party peripherals, replacement shells, parts, and such are out there for the Switch but you never know I suppose 🤷
Makes me want to buy a Switch Lite just to try. Especially that new Zelda one. But I got the Zelda OLED already... and I play docked 99% of the time. 🤷♂
Got this model myself for my eventual mod. Gonna install the HDMI & touchscreen kit, itll be the black screen but I'd rather have all that functionality over stock colour
Would doing a full shell swap be easier or more difficult than just replacing the screen? I'm tempted to go all out and just reshell my system while I'm in there.
The second version of this video is a shell swap. It is easier in that you do not have to worry about trying to use heat to remove your existing screen, but it takes a bit more time & and screw management. I like to do a shell swap at the same time unless I really want to keep the shell I currently have (almost never the case).
@@TakiUdon2 Thanks for the quick reply! I think that a shell swap will be the way to go then. Thanks for making such helpful tutorials and a cool product! I actually ended up ordering both the standard screen and the mega kit; I want to tinker with both and it looks like it's gonna be a lot of fun.
Excellent guide! Another video for touch screen, variant? However metal tweezer with battery on isn't a good idea + The latching mecanism is very weak and can break if lifted through a small area (tip of the tweezer) I'd suggest using plastic and flat tool.
I love it, will order one for one of my switches. I also have a few questions: - for 30fps games, with the responsiveness of an oled screen, will you notice an increase in stutter, like much oled tv’s. - will the screens with touch come available in the future in more colors, like the standard. - is there a picture or video where to see how the black one looks from the mega kit.
@bryancartagena3286 A replacement Switch Lite shell with the OLED screen, touch panel and HDMI mod pre-installed, as well as a new battery, buttons, and hall effect sticks, so the only original parts needed are the motherboard and cooling assembly.
On twitter he said he‘s trying to get the other colors for touch but black and white are the only one right now which show good quality. According to him you are also allowed to order black or white now and change your order afterwards
Feel like I got scammed yall. Ordered my non-touch screen September 26th, and still haven't received it. No tracking information, just empty promises lol. How can I be an early bird order and not even recieve a shipment notice?
I ordered my non-touch the day before you, and everything finally worked out for it last week! Obviously it is very late, but I appreciated the reach out early on in the delay that explained the timeline and issue. I hope yours ships soon, I'm sure they are just working through them in order!
This looks fun for ppl like myself who like to tinker with tech. You could get a not as bright oled switch that can be docked for around the same price of buying this and a lite.(also did Taki say these screens don’t have touch?) The one for preorder seems like the one I’d wait to buy for the 1080p resolution not docked on any switch is very nice👌
V1 and V2 don't have the X1+ so it might not have the hardware for it, dunno if it can be done without homebrew and more hardware... hope is possible though.
I ordered the oled with touchscreen, I’d love to have the Switch oled screen on a switch lite, even the standard settings would be more than acceptable on a switch lite system.
Have you considered making a little board for raspberry pi projects? I feel like oled screens that can work with the pi are difficult to find. This might broaden your customer base.
Exactly, no idea why is not showing, if the hdmi output need to come from the screen to usb c, i dont think its going to look pretty on a 60inch tv screen atough its 1080, think about a frame rate drop for instance, or no full screen support ,,,,
So your bezel options are black and white, but this one is grey? Just trying to understand options. This is fantastic!! I guess I’ll wait for touch OLED demo. I have a new transparent purple shell and I chose the black bezel touch screen (I’m going to switch out the white buttons and sticks with black ones)
As I understand, this video shows the installation of the non-touch screen kit. So I think that while the bezel in this example remains stock, it isn't compatible with the upgrade.
Black and white are the current ones for touch. The bezel here is the „standard upgrade kit“ where the Pokémon metallic grey is available. This screen is made of glass but without touchscreen Here is another post from me about the colors On twitter he said he‘s trying to get the other colors for touch but black and white are the only one right now which show good quality. According to him you are also allowed to order black or white now and change your order afterwards
retroremake.co/pages/super5
can we fix shipping to pakistan ?
@@UsamaAhmad_odata can ship to Malaysia? 🇲🇾
Could you shed a bit of light on how the HDMI kit will be installed? The oled/touch/hdmi kit I ordered says that there are no shell modifications necessary and no soldering required. How's that possible?
@@LeBoomStudios thats a really good question. Ordered the same... still trying to figure out how they do it. Somehow access test points, replacing game card slot or headphone jack ... hmmmmmmm
@@urubarin3966 The headphone jack would be way too small, even for micro HDMI. The Gamecard slot would be a nice idea, since mine is modded anyway. So either that or the description is just copy+paste for all of the kits and a bit of actual soldering is needed. From what I've heard, the USB Type-C controller is the same as on the OG Switch, just wirhout the additional DP-Alt controller IC. As such, it should support video output and it should be possible to directly route the display output to the unused pins.
Got mine last week - installed in about an hour with me being very careful and organized. Had to double check my power connections when it didn't turn on at first, but worked great once I had double checked my work. Looks great - highly recommend for anyone with a lite!
does yours look somewhat blurry?
This is insane, even the HDMI mod alone is huge, advertise this dude!
Just pre-ordered my SUPER5 OLED Touch / SUPER5 HDMI. Can't wait for it / a video of it.
He posted a vid about the hdmi on his Instagram and twitter
Atomic Purple Mega Kit ordered.
No reason to pry my brand new screen out of my refurbished Lite with this shell kit. ❤️
The fact that it includes a hard case, new battery, hall effect joysticks and button replacements is just so much value!
I got my screen yesterday. I reshelled my lite and installed this screen. It looks so beutiful. Super happy with the upgrade. Thanks Taki!
I got mine today and just want to confirm that it works fine and looks awesome. Thank you Taki for a great product!
Just received my screen a few days ago, just wanted to note, I followed this video and it was super easy to install and the results are outstanding. Thanks!
Was waiting eagerly for this. Waiting for OLED Touch tutorial too.
Same can’t wait to see the touch tutorial
Can I ask why is the touched used for . Do you need it at all or are some games or menus only workable with touch ?
@@droo3010 Mario maker 2 and Mario 3d world/bowsers fury are my main 2. Plus I would rather pay 10$ extra with a promo code to keep all the original features of the screen.
@droo3010 it's not necessary, more of a convenience. Switch games are able to be played in "Docked" mode on a television, with a controller, not by touching the screen.
Which is actually what makes this so interesting... its simple. Do I really need a touch screen? I'll be very curious to see a touch screen tutorial as well before purchasing.
@@droo3010Touch screen is faster than buttons for menus and is very useful when you have broken buttons too. I wouldn’t buy an Oled screen for the Switch Lite if it doesn’t come with Touch functionality, but other people may.
Installed mine today, great packaging, nice tools and amazing screen. Patience is key to install it. I really love the switch lite for its perfect size but always been annoyed by its weak screen. Now I have the perfect portable console 😄, thank you!
Order placed, hopefully everything goes as planned. Can not wait.
What package did you buy
@@360MM-11 non touch+HDMI
Can you used the original Touchscreen with that kit or not?
@@Joelwilldoit no
@@Joelwilldoit you need SUPER5 OLED - Standard Upgrade Kit (Compatible with Stock Digitizer) currently sold out to be able to use your current touch panel, however color is not matched.
Man, you did a great job creating these kits!!!!
I know the Switch 2 is coming soon. But now I really want this oled on a Zelda Switch Lite
I was thinking of buying the Zelda switch lite just for this
That's what I'm doing, my Zelda Switch Lite is delivered today and I'm just going to keep it sealed until I get an OLED screen in and do the swap.
Same
@@PolecatReturns Do they sell with a matchings screen frame color for the zelda switch?
@visceral_flex4213 that's a good question I didn't even think of that itnwould look weird if it's not the same color
Nice, that's the best shell I've seen & with the upgraded screen, it's just perfect. Great video as always.
Great job, Taki! I wish you the best of luck on this project! I will be ordering one.
Preordering the kit with HDMI. This is next level.
Just purchased the Touch version,…..SUPER excited for this!!!
just pre ordered! been following this for a long time! super excited.
Looks simple enough but you might want to touch on thermal paste in the next video - You didn't replace any between the heatshield and the copper pipe; seems like too much paste left the build when removing the old heatshield.
In all fairness, having repaired so many switch systems myself, you never really need to. The soc used in it is so lower power that it doesn't need much thermal paste. I've not ever replaced it except the first system I did and it's not been an issue. You'd only really need to do that if you were modding and overclocking.
@@lieutent2654 for those who plan on opening up their consoles multiple times, would it be advisable to replace the thermal paste with a thermal pad for less mess? Or better to stick with the paste?
@@lieutent2654 he put the plate direct down with zero paste between the backplate and heat pipe . Is it fine to not add anything at all ? I'm talking about the paste on top of the heat pipe that touches the back metal shell
@@droo3010 No, always add paste. The stuff that goes between the top of the heat pipe and the metal shielding is more of a thermal putty, which is thicker.
@@inclinerd I don't recommend a thermal pad. It may be possible to get the right size but I tried a thermal pad in place of the thermal putty on the top of the heat pipe, and the Switch Lite seemed to run hotter afterwards. Underneath the heat pipe and underneath the APU's shielding, you should definitely use thermal paste, as even a thin thermal pad will be too thick and could cause warping that could crack the PCB.
This is the coolest mod I’ve seen if it’s not to difficult this is going into my homebrew switch
This is going to make the hyrule switch lite look so good
Just ordered the mega kit love your work
Mine arrived yesterday, was super simple to install… though the old screen was much harder to get out than I thought 😅
The screen looks fantastic in person though! And the colour match is great too, you’d never know until you turn it on that the screen isn’t the one that came with the system.
It’s perfect! And now my Switch lite is the best portable little system!
So great to finally see what's involved. Many, many hours of hard work I suspect 👌🏼
Would you consider putting together a SKU aimed at installers, without the additional tools and maybe some incentives for bulk purchases?
Shout out to TH-cam for recommending me this video 20 minutes after I couldn't remember the name of where to buy this
I always loved these understated special editions. 😤
Waiting on the mega kit tutorial. This one was done great.
That makes two of us. I am not handy at all, so rather than potentially bricking my life, I’m trying to figure out if I can handle this with a detailed tutorial or if I need to go to a computer/mobile technician to do it.
Placed my order and I cannot wait for this to come in
Great to see this, but will there be a video for the hdmi mod, and maybe any chance to only buy the hdmi mod?
Just ordered mine oled touch and hdmi waiting for that video 😊
battery drain test vs the original lite panel please.
I was thinking the same thing lol
A Switch Lite Oled with a tv output will be the best handheld ever made.
Can't wait for the first mobo mod for this one.
ordered the mega kit can't wait to see that video
Amazing work taki! I'm so excited to get mine
idk why im watching this, i dont even have a switch, but its cool that a oled replacement is out for none oled models
Fantastic mate , as Fire Zodiac I have no patience done this all work 😂
Just got mine installed. Overall, pretty easy. Then I thought for a moment that I made myself a situation by not waiting for the touch version when I seen the hekate display and realized I couldn't navigate it with touch and the controllers doesn't work normally. Good thing I realized that the joy con can be used like a mouse ;)
I think this is my next hardware project. Has to be easier to work with than the iPod Classic and 3DS units I've worked on recently. Looking forward to seeing instructions for the touch panel option!
Got one preordered, thanks Taki! 💪
Ordered the non-touch.
Should the thermal paste be replaced while it's open or is it fine to just leave it?
It's always a good idea to replaced it. The Tegra produces slightly less heat than a normal Computer CPU, so any decent CPU paste will suffice.
arctic mx 4 for is good and cheap like 7 bucks, 4g will give you way more applications than you'll ever need if you don't do this stuff much
I did both, and didn’t notice a difference either way. If you just take the heatsink and shield off and put it aside without disturbing the paste it’s fine, but new thermal paste is like 2$ so I would just replace it.
Always replace the paste when you break contact.
If it's not had a repasting done over the last few days, always stick on new paste to ensure you're getting good contact with the heatsink.
Super hyped for this, awesome!!
Why they dont made a screen larger? to occupy all square??
This is very well thought out product. it would be cool to see something like this on original switch models, which would make for easier software modding.
Great guide but the custom metal shielding and the custom flexpcb dont line up. One of my buttons on it is under the shielding because the prototype has horizontal buttons where the final has vertical
It’s kind of disappointing to be honest lol. But its still an oled screen. I cant really tell the differences when I press the buttons to change the display.
I had this too. It doesn't seem to actually press down on the button under the shield and I think the shield could be modified to accommodate the vertical buttons, but probably we should just get new shields sent out to us (or boards with horizontal buttons.)
Definitely gonna get this for my Hyrule edition
Very cool, and looks pretty easy and straight forward. Kinda stinks you lose touch functionality but i suppose i hardly ever use it anyways lol. Look forward to seeing the next video!
Ordered 5 touch screen kits :) excited to try these, thank you for the hard work you put into this!
Please do a video on the newer touch and hdmi out version
Pre-ordred the touch/oled version. Hopefully I got in quick enough to get it shipped in the next couple of weeks! So excited to mod my Zelda lite!
The mod I wanted to do for quite some time. Order placed 😊
Ordered one. I'm just praying the gold on the screen matches my new Switch Lite Hyrule Edition 😅
That's awesome! We can see in the end the screen is using PWM, do you know at which frequency it's working?
Wanna know too
I bought a preorder, and it's November. When will you send it out? Also to everyone have you your order yet?
hoping they ship soon too :/
They regularly update the website with shipping projections.
Can't wait to see the HDMI mod in action!
I hope one day there's a Super 7 for original switch owners, I just don't feel confident enough to install a jailbreak kit in a Switch OLED, but a screen swap seems more safe.
This is nice. Definitely on my list
Awesome video, very detailed. I just bought the Zelda edition switch lite and really interested in trying this out on it
Looks so awesome - also pulled the trigger on the mega pack. Hyped since you startet your first teaser 😊
Looking forward for you handheld release aswell.
Since you announced it, I've been thinking about selling my second analogue pocket. You really can't beat the price-performance ratio you offer. In contrast to analogue, you are also available for questions or suggestions❤
Looks good for real! 🔥
Taki. Thank you so much for the mod and instruction video.
Im waiting on the hdmi no touch version prior to purchase.
Nvm just ordered 2 mega kits... 😂
Can't wait for an OLED for the V1 Switch, hopefully a battery upgrade.
I don't know, if ther'll be a touch version, but if you want one today, you can delaminate the oled screen from the glass (with a very thin wire - around 0,04mm, heat and maybe some ipa), clean it, put loca on it and laminate it to the digitizer from the switch lite. Finicky, and you can damage the screen if you don't do it right, but you would have touch.
thanks for the video, i wouldnt mind just buying a new shell and transferring all the guts over to the new shell with a new screen to avoid the whole removing screen part from the old shell.
God I am so happy this mod is here
What are your thoughts on the availability of this screen mod? I wondered if you had any info on the quantity available as well as whether or not you think Nintendo could strike their hands upon it. I know it’s not doing anything against them but they have been extremely forceful in being the only source for products that are even remotely related to Nintendo. Thanks for this tutorial! I’ve been waiting for so long to see it!
I doubt Nintendo does anything considering how many third party peripherals, replacement shells, parts, and such are out there for the Switch but you never know I suppose 🤷
@@GreenLeefMusic great point 👍
No shipping options for Mexico, bummer....
Try again later today
Get a mail redirection service to reroute post to your home
I literally got that same one. I love that Pokémon Lite
Makes me want to buy a Switch Lite just to try. Especially that new Zelda one. But I got the Zelda OLED already... and I play docked 99% of the time. 🤷♂
Will the installation of PicoFly-RP2040 in any way affect the installation of SUPER5 OLED Touch + SUPER5 HDMI upgrades on Switch Lite?
Got this model myself for my eventual mod. Gonna install the HDMI & touchscreen kit, itll be the black screen but I'd rather have all that functionality over stock colour
Would doing a full shell swap be easier or more difficult than just replacing the screen? I'm tempted to go all out and just reshell my system while I'm in there.
The second version of this video is a shell swap. It is easier in that you do not have to worry about trying to use heat to remove your existing screen, but it takes a bit more time & and screw management. I like to do a shell swap at the same time unless I really want to keep the shell I currently have (almost never the case).
@@TakiUdon2 Thanks for the quick reply! I think that a shell swap will be the way to go then. Thanks for making such helpful tutorials and a cool product! I actually ended up ordering both the standard screen and the mega kit; I want to tinker with both and it looks like it's gonna be a lot of fun.
Excellent guide! Another video for touch screen, variant?
However metal tweezer with battery on isn't a good idea + The latching mecanism is very weak and can break if lifted through a small area (tip of the tweezer)
I'd suggest using plastic and flat tool.
you got to advertise this second channel. I didn't know it existed.
Who was whispering at 15:55? Lol
👻
your mom
Waiting to see mega kit , hopefully soon , cuz i wanna order it.
too afraid of opening my new hyrule edition lite for this but would love to.
I love it, will order one for one of my switches.
I also have a few questions:
- for 30fps games, with the responsiveness of an oled screen, will you notice an increase in stutter, like much oled tv’s.
- will the screens with touch come available in the future in more colors, like the standard.
- is there a picture or video where to see how the black one looks from the mega kit.
when can we expect restock from touch+HDMI?
@Taki, will you also make a video of the Mega Kit? I just ordered the Mega Kit package and would love to see the Mega Kit replacement in visual action
What's the Mega Kit??
@bryancartagena3286 A replacement Switch Lite shell with the OLED screen, touch panel and HDMI mod pre-installed, as well as a new battery, buttons, and hall effect sticks, so the only original parts needed are the motherboard and cooling assembly.
At the end of this video he says the next video is with Shell swap so it could be the mega kit
Great tutorial video, very clear instructions and warning advice.
Any chance you'll be making a colour matched Touch OLED HDMI output one in gold?
On twitter he said he‘s trying to get the other colors for touch but black and white are the only one right now which show good quality.
According to him you are also allowed to order black or white now and change your order afterwards
@@michaela831 he's also working on a larger 5000mah battery increase too!
Feel like I got scammed yall. Ordered my non-touch screen September 26th, and still haven't received it. No tracking information, just empty promises lol. How can I be an early bird order and not even recieve a shipment notice?
I ordered my non-touch the day before you, and everything finally worked out for it last week! Obviously it is very late, but I appreciated the reach out early on in the delay that explained the timeline and issue. I hope yours ships soon, I'm sure they are just working through them in order!
Have you gotten it yet? I bought and installed a touch panel from him. This guy is legit.
Look over the kit options, where will the hdmi out be placed on this mod?
I watched this video specifically for the hdmi. Bleh.
@@scottmoghe litterally says in the beginning it's the no touch mod so why would you keep watching then
@@droo3010 the touch version has the hdmi out?
Didn’t even own a switch lite until I heard about this kit. Now I own 3 😂
Cant decide yet what to get. Need to see part 2 with hdmi and touch.
I hope we see something similar on the next switch lite also
Bro! When is PART 2?!?!
How does the screen size compare to the base switch lite? Is it the exact same size or slightly bigger?
Need to see the part 2 with touch screen and hdmi mod. But the mod part are nearly cost as much as an 2ndhand switch lite.
Congrats on finally getting this to market. Kind of bummed the replacement shell is only packaged with the touch screen combo.
This looks fun for ppl like myself who like to tinker with tech. You could get a not as bright oled switch that can be docked for around the same price of buying this and a lite.(also did Taki say these screens don’t have touch?) The one for preorder seems like the one I’d wait to buy for the 1080p resolution not docked on any switch is very nice👌
Will you prepare one for the regular nintendo switch? The v1 and V2?
V1 and V2 don't have the X1+ so it might not have the hardware for it, dunno if it can be done without homebrew and more hardware... hope is possible though.
V2 is Mariko, same as OLED and lite lol :P anyway LCD and digitizer is compatible between v1/v2 wchich means they have same pinout @@soragranda
@@maxmax-xx7nw So then is possible to V2?
If that is the case then a project like this could appear in the future.
Que andas haciendo aquí, soy huma_dawii@@soragranda
@soragranda v2 is mariko. Lol
would be cool to have a homebrew app for those with a modded switch
also for anyone doing this it wouldn't be a bad idea to replace the thermal paste
I ordered the oled with touchscreen, I’d love to have the Switch oled screen on a switch lite, even the standard settings would be more than acceptable on a switch lite system.
could you also do a tutorial for the HDMI mod that they've also made ?
Have you considered making a little board for raspberry pi projects? I feel like oled screens that can work with the pi are difficult to find. This might broaden your customer base.
Amazing thank you totes getting it.
I would like to see the hdmi version, as well the output on a tv
Exactly, no idea why is not showing, if the hdmi output need to come from the screen to usb c, i dont think its going to look pretty on a 60inch tv screen atough its 1080, think about a frame rate drop for instance, or no full screen support ,,,,
want one that matches the Hyrule Edition
So your bezel options are black and white, but this one is grey? Just trying to understand options. This is fantastic!! I guess I’ll wait for touch OLED demo. I have a new transparent purple shell and I chose the black bezel touch screen (I’m going to switch out the white buttons and sticks with black ones)
As I understand, this video shows the installation of the non-touch screen kit.
So I think that while the bezel in this example remains stock, it isn't compatible with the upgrade.
Black and white are the current ones for touch. The bezel here is the „standard upgrade kit“ where the Pokémon metallic grey is available. This screen is made of glass but without touchscreen
Here is another post from me about the colors
On twitter he said he‘s trying to get the other colors for touch but black and white are the only one right now which show good quality.
According to him you are also allowed to order black or white now and change your order afterwards
ordered the touch + hdmi output version, im hoping that it does what it says and allows for a way to capture footage