EP12 Project Lotus Hunter: 6 Speed C60 Gearbox shifter conversion and brackets for MR2 Spyder swap
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- After last week's long 35 minutes episode, this week we finish the Transmission build for the Swap into the Toyota Mr2 Spyder zzw30 (MR-S). Key elements are converting the shifter for the MR Layout and the Transmission brackets. Take a look and follow the step by step process! Enjoy! Add me on Insta: @jesse_yaroo
My Instagram: / jesse_yaroo
You should notice it, but I have finally decided to use another editing software because Imovie was ruining my life by corrupting my files. I am using Final Cut Pro X and have for the first time tried to do some color grading. It should look better! Tell me what you think.
Enjoy!!!
Step by Step Process:
To do prior: remove 6 Speed shifter shaft and linkage. Do the same with the 5 Speed shifter linkage and shaft too.
1:54 Take 6 Speed shifter linkage appart, prepare the swap shaft on cover
2:15 Remove both gromets in the shaft that hold everything together
3:00 Remove gromet at the tip of the shaft
3:09 Now remove everything and take good note of the order the parts are assembled
3:40 Re install all the parts removed above in the reverse order you removed them (identical to when you disassembled everything)
5:02 Key point: Make sure the teeth are facing in the right direction!
5:30 Now retrieve the mr2 5 speed shifter linkage and end link
6:12 Install external shifter linkage for 5 speed onto the 6 speed swap shaft
7:18 Reinstall Swap shifter into your 6 speed transmission (C60)
8:53 Trace holes for Shifter linkage bracket onto the housing that is missing on the 6 speed
9:06 Drill 2 holes of 8.5mm
9:16 Thread the two 8.5mm holes with an M10 Threading tool, or with the Original Toyota Threads
9:38 Assemble Linkage Bracket onto 6 Speed with the given threaded holes and screws
10:10 Install the 2 missing Brackets from the 5 Speed Mr2 Gearbox, install 5 speed reverse 5 speed sensor and 5 speed shifter cable brackets.
11:39 Bonus. For all you guys who think the 1ZZ clutch goes on the 2zz... WRONG!
Thats it for Part two! Thanks for watching!
This is Part 2 of 2, of the Transmission conversion video I have made to make your C60 bolt on and plug and play in the ZZW30 chassis!
My recommandation:
Watch the the whole playlist of this project to fully grasp what and why I am doing it!
My Mr2 Project:
• Project Car: Toyota Mr...
How to Swap a 2ZZ Tutorial Playlist:
• How to Swap a 2ZZ - GE...
Make sure to subscribe if you want to see the next steps of the Mr2 Build!
#toyota #mr2 #zzw30 #1zz #2zz #2zzge #engineswap #swap #c60