ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2025
- The Cheetah Mounts APTMM2B TV wall mount is designed to work with 32” to 65” flat screen televisions weighing up to 165 lbs. It will work with 16” and 24” stud lengths and positions the back of the TV 1.5” from the wall. If you’re concerned about the space for your HDMI cables if they come directly out the back of your TV consider these 90 degree adapters amzn.to/1YuF1CB In addition to the bubble level, metal mounting brackets, wall screws and three sizes of bolts for the back of your TV you also get a 10’ braided HDMI cable. For just over $25 on Amazon this is a really great deal (most TV mounts from Best Buy, Walmart and other stores cost $60+. This particular model has been reviewed by over 10k Amazon buyers and is a number one best seller.
This video was quite helpful, thanks much! Another thing we did after my wife struggle with pushing pin to lock brackets is we removed the TV again as we know we wanted all the way back (no tilt play needed) so pushed the pin with the hooks in position where it hangs on rail and then lifted and rested on rails and then tighten the screws under (my model has this lock from lifting off)....great video!
I have watched tons of instructional offerings on TH-cam, tons, on a wide variety of topics...THIS IS THE BEST I HAVE EVER SEEN. PERIOD...I'm even gonna steal your "backsplash " idea for contrast going up the wall. Tell your wife I said "THANKS!!!"
I just bought this mount on Amazon and I'm going to install it this weekend. Your video helped me a lot.
Haha so I just bought this mount and searched youtube on how to install it and recognized your voice from the bike videos lol. I was the guy you met in virtual reality a few months ago. Hope your doing well man and thank you as always for posting helpful videos!
What a great video! Very well done. Straight to the point and not over-complicated. Easy to follow. Thank you.
You must be special, you actually got instructions with yours.
Ordered the exact same one should be here by tonight :) can't wait.
Thanks for your video, this helped to mount our TV.
You can put velcro on the back of the tv and the cheetah paws to attach them to the tv.
Thank you for the video! So much easier to understand than the instructions it came with. The only thing that confused me was you mentioned 12.5 inches from the bottom of the TV and then you said to add 32 inches when figuring out where to place the holes. Can you explain what the 32 inches is for? Thank you!!!
This video helped me out a lot. Thank you for the step by steps
Is it normal that brackets are loose on the mounting position? It's not perfectly latched
do I have to unlock those cheetah paw things to move the TV over? I just want to slide the TV from left to right about 1.5 inches... can I just lift and move over?
Joseph S good question. I want to do the same thing. I presume you have to pull down on the 2 plastic cheetah paws in order to release the bottom of the tv. This will allow you to move the tv slightly, then click back into place.
How has it held up 2 years later any issues?
Thanks for your video, I have to install one next week, my tv is 40".
Thanks man! This helped a lot!
Awesome! So glad it made the install easier for you Jen ;)
How do I take off the TV, if my release string fell off after installation?
Excellent review! One question: I need to install a 65" and HDMI are on the side - I was wondering if there's enough room for the cables to pass behind the TV. Could you Help me out?
To close to fireplace. Check fireplace manual on how far to place tv. I think it 2ft
Suppose there was a metal studs behind the wall what would you do?
Good question, Sherman. I believe that it is possible to drill into brick and metal, but requires a special bit. Also, be careful about damaging the structural integrity of your house or apartment. It might be smart to just buy or create a stand instead of a wall mount for your situation :/
can you verbalize how to lock the tv in place? Please? i can't seem to get both sides for some reason.
good video but I think its compromised by the fact that you used a black background cant really see the attachment . why use black on black for demonstration purposes?
I just bought this same exact wall mount for a 65" LG. I was wondering what the VESA pattern was for your Samsung. My LG has a VESA 300 pattern, so I did not have to use the larger configuration for the wall-bracket. The hooks on the TV lineup perfectly on the smaller configuration wall-bracket. Would there be a benefit to using the larger configuration instead? Thanks!
Great Job explaining!!
Hi court, can you help to do amazon us video review? EVA / silicone ipad case
Hi, what vesa pattern I need to select for my 65” samsung?
Plz i need help i wanted to ask wat type of screws for the tv are or size
what size is the drill bit you used? mine ask for a 3mm and 5mm, but mine are in fractions, 3/16th is about 6mm from searching online, will that be ok to pilot a hole? then i can screw the wrench screw into the wall stud?
I'm not sure, this was installed a while back so I don't remember the exact drill bit. Maybe start with the smaller size, try it and then move to larger if it's too tight? Easier to go big than try to go backward to something smaller... like shoving toothpicks or other wood splinters and glue in the hole to fix it :/
Wat size screw was used to mount the stand to the back of the tv
Bro why you using a concrete drill bit your drilling into wood studs please use appropriate bit !
Thanks. :)
I never heard of a 58" tv interesting.
yeah i got a 57
i like it
You didn't hang tv on wall without testing it to make sure it worked? Haha. I'm sure you did.
Do you have to remove the whole tv to connect wires such as optical cables, etc? Or does the tv swing away from wall?
BETTER CONNECT WIRES FIRST
Just don't ever turn your fireplace on!
I just bought one like this and its rubbish all those pieces is asking for trouble a one piece bracket is much better.