How to Disassemble an Engine Step by Step
ฝัง
- เผยแพร่เมื่อ 10 เม.ย. 2017
- If you're thinking of rebuilding an old, tired and worn out engine, this will be a good guide on the steps involved. In this film we show how to disassemble an engine; removing drive accessories, carburetors, exhaust, intake, cylinder head, piston, connecting rods and crankshaft. A machine shop will clean the block, check for cracks, line hone, deck squareness, etc.
About this particular engine: 1973 Datsun 240z l24 2.4 liter inline six cylinder engine. 170k miles. Cylinders two and three have low compression due to worn piston rings; as shown here: • How To Compression Che...
►Subscribe: / carsntoys
►► Tools and Supplies: www.amazon.com/shop/carsntoys
►►► Our most helpful videos (One million + playlist): • 1 Million Views Playlist
Note:
This video is being performed by an experienced tech. Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, use safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. If you don't think you can perform the job then be smart and don't. Carsntoys is a member of the Amazon Influencer Program.
Publication, reproduction or distribution of this film is strictly prohibited.
How to Disassemble an Engine Step by Step
• How to Disassemble an ...
Carsntoys
/ carsntoys - ยานยนต์และพาหนะ
As someone very new to the whole program I just wanna say this was a great video for me. Not bogged down with a lot of technical knowledge and terms (those will come with time) it's an excellent showcase of concept just to familiarize myself with a machine.
I watched this video to show my grandpa you can learn anything on the internet
I could watch it 153 times, and if I tried to R&R a motor I guarantee it would never start
@@1jasonover not with that attitude anyway
Lol
PERFECT EXAMPLE 🤣🤙🏾 I’m with you
@@cahilkennedy4770yes it will
“Not one bolt has broken yet, I hope I don’t jinx myself.”
Literally snaps his first bolt on the motor less than 5 minutes later😂
lol..yeah but everything held up pretty well. I think two bolts broke overall.
This video is legendary. I recently got a very cheap rusted 240z and wanted to buy the car to learn about motors and building them. It is the perfect candidate. I pulled the motor and have it on a stand, now i shall take it apart in tandem with this video. Thank you sir.
i spent about half an hour looking for a half decent video that could explain how to disassemble an engine till I stumbled upon this one. I actually understood everything, it helped a lot for my project so thanks man
Awesome! Glad to help
Thank you for this wonderful video. You are a gifted communicator and teacher. Your 'genius' lies in not saying more than is necessary! Best wishes.
Quality video mate. Nice work and good job explaining everything too. 👍
Great video. A lot of work went into this, you explained things clearly. Nice job!
Thank you.
I’m just here to try and learn something because I see so many other guys know so much about cars and I have no clue about anything I just know what looks cool what goes vroom fast
Fantastic mate..my new hobby for quarantine
this is so relaxing to watch
It was quite relaxing to work on as well. Cheers.
Thank you a bunch, I've recently started playing a game called car mechanic simulator and found a lot of interest in working on cars and started wondering how to take a real engine apart.
Same 🙋🏻♂️
Thank you very much for taking so much time to explain about this
You're very welcome!
Excellent video, thanks for taking the time to explain every move :)
Thank you.
I eventually plan on getting a 240Z this video is invaluable as I have next to no mechanical experience when it comes to wrenching on cars. Thanks so much!
It's a lot of fun to work on. Just watch for rust! Specifically, frame rails and floor pans. Spend more for a rust free car. It's worth every dime.
Very nice theotorial in actual disassemble diesel engine basic and proper more power good job Sir.intructor.Mr.Mechanic
Golden video man.
Thanks man. Appreciate it.
A really great video to watch, he speaks loud enough, he doesnt go too fast. Vary good teacher.
Thank you! 😃
Excellent, you explained it clearly. I am not a mechanic but after watching this video I can do it
This was really helpful thanks man
Glad to help!
Thank you for sharing your knowledge... This from Bogota...Colombia....thanks.... Jaime
You are very welcome
Just did this in class today was so cool
Nice and smart work
this video is so so so awesome to help me with taking apart i straight 6
Awesome! Glad to help.
looking forward to further footage!
Thank you. Appreciate the feedback.
great video. Thanks for sharing all that great info.
Thanks. Glad to help
Very well explained! Its going to help me alot on my project! Thank you ⚙️
Glad to help. Check out Pete's Garage, too. Excellent videos.
You got such a nice videos!
I'm totally satisfied ❤ thank you sir 🙏
good job man 💪
Excellent video man it was very useful
Glad to hear it!
Nice video very thorough.
Thank you. Appreciate the feedback.
Great video.
good day dude, im from.philippines. I have learned a lot about your video thank you for this tutorial. GOD BLESS
You are very welcome
I love this work
excellent video! thnx for the great explanation.
Thank you. Glad to help.
Great video
Thanks a lot great video.
It was really good job...and Thanks for making this video...😘😘😘
Glad to help!
Its so great most feeted to work that ask a auto diesel mechanic.I'm proud to be the one know I'm was 40 year old its so manny expirience in whole life as a father of my sons two and one duoghter.I'm pruod to watch like that view about engines.
Great video, thank you! I am preparing for my first engine rebuild, this video will help me a lot :)
How did it go after 7 months?
@@Comrade420_ slowly 😃 engine is at the garage, still need to some prep work and tools. I will make videos for yt about my project so others can also see what and how 😃
@@lacebycr cool!
@@Comrade420_ Petrol Car Queen - IG is already active, YT will soon follow :)
@@lacebycr ok!
Excellent
love the vids
Very great thanks ..
Thank you very nice
Looking forward to working with you .....
Great job..
Thank you! Appreciate the feedback.
I see you have a Pittsburgh engine crane. Is it the one-ton or the two-ton?
Thanks for this video. I just bought a 2001 Chrysler Sebring 2.7 liter that I'm going to do a re-build on.
Thanks
Found a kubota D722, im taking it apart and then im gonna Try to rebuild it, its the first engine and with no expirience just curiuseti i Hope it will work out. Im 14 yrs btw
Awesome!
Good luck to u bro bro. Im watching this vid to learn how to take apart an engine too so i can rebuild one. Im 15 with no experience as well. Hope u can rebuild ur engine 👍👍
Im trying to fix my sister old car she didnt maintain the poor thing now its sitting in the gravel neglected im 16 but since i am a girl my parents dont let me play around to much with it
@everything Channel simp
To all of you Who Wonder, i rebuilt it with some help from my older Brother, and managed to get it running.
Your getting there,
Where do you find all of the gaskets you need after this?
best vid ever
Thank you.
anh em công nghệ ôtô mãi đỉnh
Now i know. Thanks a lot.
Glad to help.
I have been declared mechanically brain dead in multiple states. Soooooo embarrassing......but, I gotta own it. Thank you for this video!!
Hello there. Do you do also diesel egines teardown? Or if you know another youtube channel that does or a link. Thanks. Good video💪
like,wow groovy man.
Good
Another additional my personal experience. How to Disassemble an Engine Step by Step
Could also do a leak down test to check for a leak
If my starter is located in the intake valley, would I have to pull the engine to access it? Or could I just open it while it's still in the hood?
You could be there for ever putting the bolts in bags and then you will need to take them out again later. good idea taking photos yes best fitting new hoses, Great video and interesting. I did this over 40 years ago. your video as made me keen to start again. I don't see you using much expensive snap on kit. good idea colour coding. Why didn't you steam clean before you started
Most owners don't have a steam cleaner. All my videos are with basic hand tools and nothing more. I tend to use Craftsman. I've had good experience with their tools for man years. Cheers.
it would be good if you include names of all the parts
dude i would love to work with you 🙏🏻
You can use a degreaser to clean the oil from the engine
Thank you.
Ek vedio engine assembly pr bhi ho to Better he...
by weight roughly what is the percentage of Aluminium alloy and Steel in an engine block?
now all i have to do to put it back together is play the video in reverse
Seperating those bolts on the engine and named it based on its specific position. Filipino mechanic didn't do that 😂 But thanks, I enjoyed to watch 😄
Yes because they memorized it or sometimes unorganized.. Depends 😀
Hey man ima need you to help me inside the engine like the rods can you help physically because ain no one I can find out here
Do you think I can clean out burnt oil in my engine by disassembling it I want to restore my engine it’s vg30 and my mechanic says to get a new one but it has 120,000 miles I feel like I can simply try to take care of it on my own it had a blown head gasket I really think I could make it happen and fix my head gasket by just learning how to get around the oil first
Question. How long would it take a skilled mechanic to teardown and reassembly a engine on a dodge challenger?
Teardown not very long. Reassembly is a different. All parts have to be lubed properly, check clearances, etc. It really depends on the tech.
I want that intro music.
Should I know what should be removed first? Is there any sequence to follow?
Not necessarily. Slowly remove components and keep track of everything via pics and video. Cheers.
What do I do with the extra parts after I put it back together?
The secret car companies don't want you to know. Keep taking it apart and reassembling. Eventually you'll have 2 cars.
Like!
I'm just watching cause it's midnight I'm alone and bored
Was the rebuild /restoration ever put on TH-cam?
Not yet. However, check out Pete's Garage. He has wonderful content.
Pa shout out maninoy
Cn you provide a link for the blue place holder tool? I can't find it on amazon or eBay.
www.amazon.com/Alltrade-648831-Nissan-Timing-Holding/dp/B0002Q8TV4/ref=sr_1_2?ie=UTF8&qid=1502771737&sr=8-2&keywords=nissan+timing+chain+tool
Thanks! just ordered it. I'll be using your tutorial to pull my engine. Radiator is out and the hood is off. I can wait for your next video... hope its coming some.
How I can find part 2 of your move?thank
i don't have a reassembly video as of yet. However, check Pete's Garage. Excellent videos.
what's the very 1st part you removed at 27:43 please?! I mean.. what's it called and it's function if possible
That's the distributor. en.wikipedia.org/wiki/Distributor#:~:text=A%20distributor%20is%20an%20enclosed,the%20correct%20amount%20of%20time.
I know this was a while ago, but did you rebuild this engine or something?
No. I ended up selling the vehicle. The frame rails were completely shot. Floor pan almost nonexistent. I'm not an experienced welder so it had to go.
What is the cost to send the engine block to a machine shop?
Check out Pete's Garage. He has an awesome channel and often goes over the costs associated with a reputable machine shop. (I have yet to send the block out.)
What type of car does this engine go in to
'73 240z
مرحبا
Hold on what if my engine is still strapped to my car🤭
Ok
Does being a mechanic hurt you hands and wrists. I have weak wrists so i need to know.
You can use cordless tools to aid in the work. I tend to use basic hand tools with the help of extensions.
Use breaker bars and wrench’s that u can extend I’m 17 and I’ve been working on cars since I was 7 I started messing with engines and tearing them down at 14 and I made 8 grand in profit last summer restoring a 66 Plymouth satellite I know an engine like the back of my hand there are different types of mechanics I am a full restoration mechanic it all depends what you are trying to do or learn
@@miguelguzman60 tips for a start to a newcomer?
You can strengthen your wrists by doing push-ups on your knuckles. It will be like a ISO exercise on your wrists and strengthen the tendons.
Is this the straight engine?
I think its a straight 6
Nah it's a gay engine
Lol!😄 This block is buried underneath all those components.
What engine is this?
ARUN FELIX is correct. It's a Datsun L24 (2.4 liter) inline 6
@@CarsNToys is it not a straight engine?
@@trackuniverse9121 inline and straight is the same thing
It dont start no more
💙👍
What's the reasoning behind not using power tools? I like that you aren't, but just curious
Ideally, because not everyone has cordless power tools; or they may have one but the battery dies out and they may get stuck. I like to show different techniques using just simple hand tools. But using a cordless impact gun and such will certainly save time.
Isn't this 2jz?
Stock L24
I'm also a auto mechanic,auto and diesel I assemble and dis assemnle when I was 16 years old starting school theory actual in Garage in the Philippines in Tarlac and I work as a helper and success as mechanic with Merrit Certificate TESDA Philippinesi Tarlac.I'm also working in Manila to three Company of transport Beverage,Water,Festizide,I'm repairing diesel Caterpilar Perkins,International IH truck its to much feeted to work from engine under chacis power train.But know I'm stop I work hear in abroud Doha Qatar as Bus stuward helper and stop,work other as a cook helper,merchandicer,Sales man in chicken product,and also sales man in any kind of kichen materials,automotive tools,electrical for house,and other etchetera.
This engine TATA made in India 🇮🇳
You don't want to use a hammer disassembling anything andif you don't plan to use is it or if you use it again
Refurbish it restore it and sell it again
I tent to leave my brain capacity/ storage free up until I have the job to disassemble an engine and do research on the world wide web for that specific type of engine to assist me in the tricks and tips to disassemble certain components and parts the correct way
And I personally find it good practice to lay dissembled parts low to the ground so they can't drop/ fall/ slip out of ones hand further than the ground
😊