ฝัง
- เผยแพร่เมื่อ 25 มิ.ย. 2024
- Join this channel to get access to perks:
/ @zeiten
In this video I go over the process of replacing oil pan gasket on N51/52 engine of BMW 328i, this is exactly the same process on all other e90 body types but DO NOT applies to all wheel drive 328xi. It is also very similar to 128i and 528i with n52 engine.
Engine oil pan gasket part # 11 13 7 548 031 (I used elring seal)
Engine oil level sensor o-ring part # 12 61 1 744 292 (erring)
Engine oil filter part # 11 42 7 953 129 (hengst)
Motor mounts part # 22 11 6 760 330 (Corteco is OEM and left and right are the same)
Thank you for watching. - ยานยนต์และพาหนะ
I've been watching your video since I bought a 328i, followed your DIY from changing oil, radiator, water pump, thermostat, bleeding, etc..and decided to join membership to learn more such as this...thanks for answering my inquiries 👍
Well done. Your experience is on display compared to all the DIYs I've seen on this subject
Thank you🙌
Yo Zeiten love the channel, I needed to replace the radiator in my e92 so I did and then filled the coolant back up and I actually found out my thermostat isn’t working because my car was still overheating and after ordering parts I drained my radiator and every little came out. All the coolant is everywhere else and I put in at least two gallons before. I don’t know how to drain the coolant how would I do this. You’re the best bmw mechanic!
The whole system holds about 3 gallons of coolant, once you start disconnecting hoses more will come out I’d recommend replacing water pump at the same time as thermostat since they have about the same life span and located next to each other
Tim your a BMW Ninja 🥷 amazing content and excellent instructor 👏👏👏👏
Thank you appreciate it🙌
Hi Tim, watching your video regularly since a little while now, not only you are very calm & precise in your explanation, but also very fit & courageous to work alone... Could you please share more information regarding the extensions and socket that are loose. I am from Europe (France), I'd like to get some where can I order them from?
Thank you appreciate it, those are called wobble socket extension can’t say where to get those in Europe but here we have those in harbor freight tools
Thanks for sharing your knowledge...❤
Happy to help🙌
I appreciate your work, Nice DIY video man thanks
🙌
I think it’s much easier just to drop the entire subframe out-of-the-way!! Especially doing it on your back
Safety reasons🤷♂️
Another great video. How much would this cost? Greetings rom The Old Jarhead in WNC
Thank you, i charge as of today 1250$ parts and labor total, dealer charges up to 3k so it varies a lot depending on location and who performs the job
@@Zeiten That seems a fair price, especially being in California.
Weren't the Vanos bolts a problem on this engine? BMWNA has a new recall on them
They were but this is not the head of broken vanos bolt, i really don’t want to remove valve cover just for that but i guess i’ll have to😂
I have a 2009 328. X drive. Would it be a similar process for the x drive? Thank you, appreciate your videos 😊
No, xdrive is much more difficult. I’ll get to make a video on this repair one day
@@Zeiten thank you, mine is a manual transmission as well, not sure if that make a difference with replacing the oil pan gasket.
@danantrosiglio1414 manual is a bit easier compared to autotrans, but since you have awd it’s different. You have front differential attached to oil pan with axles and front driveshaft. I have a way of simplifying this repair will shoot a video in the near future
@@Zeiten thank you, I appreciate all your videos. I changed valve cover gasket, oil filter housing gasket, brakes/rotors and starter. I am a bit hesitant to tackle my oil pan leak. Dealer quoted 3K which seems crazy.
@danantrosiglio1414 how bad is the leak?
You know when u open up the hood e92 and where the hood latch goes. i lost a bolt down there do u know how i can get it out
Hard to say, magnet is your best friend in that situation
@@Zeiten i think i have to take off bumper
@@Zeiten51:12 I drained my n54 that takes 6,5L. i filled 5,9l, it was a tiny bit below the max line. when i filled 6l it was perfect. I think its 6,5L if the engine is bone dry?
@@Zeitenalso we know the oil cooler stores some oil, N54 with oil cooler and n54 without oil cooler is still 6,5l.
@cosmos2382 engine capacity is 6.9 qrts which equals 6.5 liters
Hi
Ok yea 2XL is the biggest 😩🤣😂
Only a bmw would run a drive axle through the oil pan that requires you to remove all that sh1t to change a gasket . I hate those cars owned several of them garbage 🗑️ money pit 👎
We get what we get and we don’t get upset🤷♂️😁
Another amazing master BMW video Tim hope all is well and life is treating you amazing which you deserve 👊🏽!
@BMW750MG thank you appreciate it🙌 yes all good more videos coming soon😉
@@Zeiten brother I wanna support and get a shirt as well but I don't know if they run True to size unless you have 3XL lol😅 I got a big back 🤣
@@BMW750MG i think the biggest one is 2xl😁