Does it need an one way check valve to funtion? I tried to use the siphon method to improve the performance of a normal mist nozzle. I used a T connector, a normal mist nozzle and compressed air, but i cant make it draw liquid from the water container because the air escapes through the water container. Any tips to make the siphon work properly?
I will test its ignition in part 5 or part 6. In part 3 some updates. In part 4 you will see final finished nozzle attached in burner with fuel system. Thanks
That is not necessary please wait I am soon going to upload an updated version of the nozzle with an angle-type needle valve. In that, the scooter part will not be required. Thanks
Great work
thanks for showing me how to make something with a one off part so i can never build or get my time back
👍👍👍
Does it need an one way check valve to funtion? I tried to use the siphon method to improve the performance of a normal mist nozzle. I used a T connector, a normal mist nozzle and compressed air, but i cant make it draw liquid from the water container because the air escapes through the water container. Any tips to make the siphon work properly?
Email me some close-up images of your setup. You can find my email in the about section.
I hope this will solve your issue
th-cam.com/video/KuHw7iLfX38/w-d-xo.html
thanks for sharing
Thanks for watching!
I hope to see part 3 with waster oil bunner ^^
I will test its ignition in part 5 or part 6. In part 3 some updates. In part 4 you will see final finished nozzle attached in burner with fuel system. Thanks
@@WheelingChannel thank for your idea
So helful
is the scooter part needed if yes what is it for in a scoooter
That is not necessary please wait I am soon going to upload an updated version of the nozzle with an angle-type needle valve. In that, the scooter part will not be required. Thanks
Sir new video upload
Very soon