@@nazimsakhri1558damn, it was 4 years ago now but I don't recall it being very difficult. I know I was probably cautious so probably did it a bit slower than in this video but the end result was that it worked first time and I saved money on not needing to buy a crimper.
Great help, I followed every step exactly like you did. Didn’t work first time, no problem I have a pack of 100 connectors and got it second time. Thank you Andrew!
advise: there's a n extra wire inside the cable you pull and drag it and it slices the casing vertically, instead of slicing the cable and twisting it back and forth like in 1:30, this way you won't slice the insulation on the internal wires by mistake or degrade the metal wires by twisting it, both mistakes introduce noise to the signal slowing the connection, no use getting a cat6 cable and make it perform like cat5e, it's almost twice the price
I fix the network cable myself. Especially when the copper wire is pulled apart, it is easy to break the thin wires one by one. After breaking, you can only align all the dividing lines and cut again . I am noob
1:31 So, when was the last time you needed stitches? Yeah, *very* dangerous to use a snap-off knife that way. Place the wire on a firm surface to slice the exterior insulation.
Like a pro. The amount of time I spend faffing about with these, when as I go to push it in the wires change order, or you end up with two wires going down one pin slot and getting stuck. Never ever stay flat and in the correct order when I put them in.
"wires change order" This part 2:56 holds all the wires firmly and pushes in the wires slowly. "Never ever stay flat" come to this part 3:00 right hand hold the connector firmly and the left hand push hard and squeeze in the wires deep inside to the connector. 3:05 from here you can see all the wires reach the end. If not push hard and squeeze in the wires again. Thanks for watching.
Thank You very Much. You can buy the RJ45 connector from computer shop or your local country online market place by search the Keyword "RJ45 connector" Thanks for watching.
Is there a way to safely remove the connector? I'm planning to remove and reconnect the connector so that I don't have to drill a bigger hole through the wal
Try to narrow down the problem. Make sure is it the problem came from LAN cable or from the computer problem. Few ways for troubleshooting by exchange RJ45 connector to another LAN port at your Switch hub or use another LAN cable to verify. If it is LAN cable problem either one of the RJ45 connector problem or cable broken. How To Crimp Repair Lan Ethernet Cable (Cat5e) Split RJ45 Connector Share to Two Laptop System th-cam.com/video/TbnLlYvnoZc/w-d-xo.html No Internet Connection - How to check long distance Lan network ethernet cable th-cam.com/video/idU2f_UyMSk/w-d-xo.html
It's been a pretty long time since I've done any of this, but I'm pretty sure you have to cut to replace a connector. Did you see near the end where he was pushing down over the cable and then pins, and each different part popped? I'm pretty sure those are locking mechanisms that can't be unlocked again.
Basic was good. Music too loud, could not hear what you were saying. Maybe switch the camera to show what you were pressing down with the needle-nose pliers.
Sorry about that, I will take note on it. Your suggestion is for Video with voice better do not put background music right? Thanks for your advice and Thanks for watching.
You should change the title if its not an actual REPAIR but REPLACEMENT Because that means we have to BUY another tip (that will also fail easily at the end)
I appreciate you showing us how to fix (replace) the plug. But I find it hard to understand if you already have a crimper on hand to properly replace the RJ45 plug correctly. This is not good for the connectors as you bent the plastic very poorly and could later cause a very bad connection in the near future. I strongly do not recommend this type of DIY for a first timer, plus this can cause injury to them if their not careful. PEOPLE, Please use the proper tools for this so that you don't have to repair the plug down the line in the future or have to injure yourself also. REMEMBER SAFETY FIRST!!!
Before the invention of tools people used the laymen method, there may be a certain class of people who don't want to spend extra money on something they can fix themselves it's safe from an environmental point of view , so reduce reuse and recycling.
may issue ako about sa modem B525 using smart corpo ko to smart switch tapos kumonect sa switch 10 pc sa computer shop ko at isa sa kabilang bahay tru lan cable papuntang router nila always nawawa net nagkala kulay yellow triangle sa internet icon sa ng mga PC ko if bununutin ko connection ng kabilang bahay na kumonect sa TP link swith ko at ibalik after 5-10 seconds bumabik na connection nawawala na ang yellow triangle sa icon mg internet sa mga PC ko sa shop ko, ano kaya probs? salamat sa maka sagot
Yes Thanks for sharinf. Crimping tool is much easier to fix the RJ45 connector. th-cam.com/video/TbnLlYvnoZc/w-d-xo.html But for those user doesn't have or not necessary to have the crimping. They can use this method.
Well it is often fascinating to acquire new knowledge. Moreover, if more people tried to fix things instead of dumping them it would be better for the world and environment.
Life saver! My LAN works better than ever now!
Glad it Helped. Thank You for Support. .
I knew I wasn’t the only guy with a ground beef desk.
😂🤣😂🤣😂🤣
who said it is beef? Perhaps dog!
Brilliant! Took me a couple of mins to get it 😂
I’m dead
Was it easy ?
good vid. cheapest crimper was like £7 and I only need it for 1 use. just used tools like you did and saved myself money. cheers
You are so Great. Solve the problem. Thanks for your comments and Thanks for watching. ❤️❤️❤️❤️❤️❤️❤️❤️
Was it easy ?
@@nazimsakhri1558damn, it was 4 years ago now but I don't recall it being very difficult. I know I was probably cautious so probably did it a bit slower than in this video but the end result was that it worked first time and I saved money on not needing to buy a crimper.
Went from 60mbps to 175mbps. Thank you so much!
Thank You Very Much.
@Liam_Eire How?
Pretty sure thats not how it works my guy...
@@danielestrada3390 He was probably on poor wifi signal before the cable
@@amandeepsinghflora5228 there s no such thing
Thanks man, you saved me around $9 and a lot of effort. Much appreciated wisdom 🤜🤛
Great to hear! Thank You
Great help, I followed every step exactly like you did. Didn’t work first time, no problem I have a pack of 100 connectors and got it second time. Thank you Andrew!
Glad it helped ! Thank you very Much for watching.
@@AndrewSMEW BB
This worked perfectly. Thanks! I’d been following other vids and trying to press them down individually, but it worked first try with pliers.
Thanks for Watching ❤️❤️❤️❤️❤️❤️❤️❤️
after watching this tutorial, I set my RJ45 Connector with CAT-6 wire successfully
Awesome ! Thanks for watching
Here's my fix, thank you very much
Happy to help
you saved my life
Yes, it saved my life many times. ( forgot to bring crimping tools to my customer's office)😂 Thanks for watching. 💗
advise: there's a n extra wire inside the cable you pull and drag it and it slices the casing vertically, instead of slicing the cable and twisting it back and forth like in 1:30, this way you won't slice the insulation on the internal wires by mistake or degrade the metal wires by twisting it, both mistakes introduce noise to the signal slowing the connection, no use getting a cat6 cable and make it perform like cat5e, it's almost twice the price
Thanks for your advice and guidance.
EXCELLENT! I just LOVE stuff like this...thanks a million!
Glad you enjoyed it!
Couldn't do it myself but I enjoyed the music 👍🗿
Very helpful thank you very much.
Thank you dude! For this wonderful idea
You are welcome ! Thank You Very Much.
This saved my day!
Thank You for watching and your comments ❤️❤️❤️❤️❤️❤️❤️❤️
Thank you so mich. Yea i was rage so much in this all steps but thank you so much you get like and sub from me
Thank You Very Much.
@@AndrewSME thank you bro
Holy shit, It actually worked
Thank You so much for watching.
Yeah informative video
Glad you liked it. Thank you very much
Excellent. those Crimpers run a bit of Money this is a great
solution..Thank you
Thanks for your comments and Thanks for Watching ❤️❤️❤️❤️❤️❤️❤️❤️
@@AndrewSME ; ko o
Thanks. Worked great
You're welcome! Thank You Very Much.
I fix the network cable myself. Especially when the copper wire is pulled apart, it is easy to break the thin wires one by one. After breaking, you can only align all the dividing lines and cut again . I am noob
Thank you so much
You're most welcome. Thank you for watching.
Really helpful. Thanks
Glad it was helpful! You're welcome.
Very nice👍
Thank you! Cheers!
Andrew. BUG thank you.
Thank you for watching.
1:31 So, when was the last time you needed stitches? Yeah, *very* dangerous to use a snap-off knife that way. Place the wire on a firm surface to slice the exterior insulation.
Yes, use Network cable cutter much safety. Thanks for your advice. Thank You so much.
It really isn't if you have experience with it.
Thank you so much. Exactly what I needed.
You're welcome! Glad it helped. Thanks for watching.
Thanks alot ...
Most welcome. Thanks for watching. ❤️
how do I know which termination is the defective one? Should I replace both? and if I just cut one's termination too much would it still be working?
Is there a way to remove the connector from another cable without damaging it? What connector types are compatible with CAT 6?
You are a god. Thank you 🙏
Thanks for watching. Have a nice day. 💓
Superb useful video
Thanks for your comments and Thanks For watching ❤️❤️❤️❤️❤️❤️❤️❤️.
It worked and helped. Thanks
Thank You Very Much. Thanks for Watching. 💗
Very informative ❤️
Glad it was helpful!
Thank you very much good sir
Thanks for Watching ❤️❤️❤️❤️❤️❤️❤️❤️
Thank you!
You're welcome!
Thank you bro, you have sub ❤
Thank you so much for the sub! Thank you for watching
thank you
You're welcome. Thanks for watching.
Good
Thanks
wow it is so simple with out crimping tools
Thanks For watching. have A Nice Day. 💕💕💕💕💕💕💕💕
Thank you to much its working ❤❤
Thanks for Watching ❤️❤️❤️❤️❤️❤️❤️❤️
Like a pro. The amount of time I spend faffing about with these, when as I go to push it in the wires change order, or you end up with two wires going down one pin slot and getting stuck. Never ever stay flat and in the correct order when I put them in.
"wires change order" This part 2:56 holds all the wires firmly and pushes in the wires slowly.
"Never ever stay flat"
come to this part 3:00 right hand hold the connector firmly and the left hand push hard and squeeze in the wires deep inside to the connector.
3:05 from here you can see all the wires reach the end. If not push hard and squeeze in the wires again.
Thanks for watching.
@@AndrewSME The video works perfectly and explains it all. Thank you mate. No need to write down what's shown in the video.
Can I connect a CAT 5 cable to a RJ45 connector and crimp without any tools i.e means by hands only?
What is the color of your Cat 5 cable ?
Thanks..let try this on my neighbour wifi connecter..😥🤣
Can u tell where can i buy the pin for the ethernet cable please BTW nice vid bro.
Thank You very Much. You can buy the RJ45 connector from computer shop or your local country online market place by search the Keyword "RJ45 connector" Thanks for watching.
@@AndrewSME ok thanks a lot bro.
from which shop can we buy connectors?. can you tell me
You can get it from any computer shop. or you can buy from online store.
Is there a way to safely remove the connector? I'm planning to remove and reconnect the connector so that I don't have to drill a bigger hole through the wal
NO, you cannot remove the RJ45 connector then reconnect back the connector.
@@AndrewSME thanks anyway. They're dirt cheap, so bought a bunch. Unfortunately I'll have to throw away the other 49
Had this same problem. Glad I saw this comment first. Will also have to throw away 49. 😞
@@goonermu8629 😅
@@goonermu8629 ship it to me 🤣
i broke mine while doing it but great vid
Welcome
Most helpful video👏🏻👏🏻 Will try it out today🙏🏻
Thank You So Much. Thanks for watching.
thought the dude was gonna cut his finger off. Geez that's scary to watch!
thank a lot ❤️
Bro is trick se pin damage hoga kya??
can i re use the lock?
the lock thing in the end of the cable?
Sorry, locking clip broken cannot repair. but you can buy the PATCHLOC rj45 locking clips. Thanks for watching.
My cable stop suddenly working, it didnt break or anything, it just stopped working, do you know what the problem might be and how I could fix it?
Try to narrow down the problem. Make sure is it the problem came from LAN cable or from the computer problem. Few ways for troubleshooting by exchange RJ45 connector to another LAN port at your Switch hub or use another LAN cable to verify. If it is LAN cable problem either one of the RJ45 connector problem or cable broken.
How To Crimp Repair Lan Ethernet Cable (Cat5e) Split RJ45 Connector Share to Two Laptop System
th-cam.com/video/TbnLlYvnoZc/w-d-xo.html
No Internet Connection - How to check long distance Lan network ethernet cable
th-cam.com/video/idU2f_UyMSk/w-d-xo.html
Andrew SME alright, thank you so much, I really appreciate your help
Why didn't you cut outside of the small cable first?
Thnx
thanks, but i have no idea what you said cause of the background music.
we can’t change the connector, without cut it ?
It's been a pretty long time since I've done any of this, but I'm pretty sure you have to cut to replace a connector.
Did you see near the end where he was pushing down over the cable and then pins, and each different part popped? I'm pretty sure those are locking mechanisms that can't be unlocked again.
Thanks dude
Thanks for your comments and Thanks for Watching ❤️❤️❤️❤️❤️❤️❤️❤️
Tq
Welcome ! Thank You
Breaks every health and safety guideline ever written. And who works over a woolly rug? Is the guy Asian or Welsh?
Basic was good. Music too loud, could not hear what you were saying. Maybe switch the camera to show what you were pressing down with the needle-nose pliers.
I just need to know how you put it back on pls reply on how
watch 2:55 hold the wires firmly, then slowly slot into RJ45 connector. Is this what you meant?
Andrew SME no I just need to know how to put the tab on
@@Nixll_ lol
Thanks. next video skip the background music as I could hardly hear you
Sorry about that, I will take note on it. Your suggestion is for Video with voice better do not put background music right? Thanks for your advice and Thanks for watching.
Bought a 35 meter lan cable, broke that plastic thingi, thought i has to get an entire cable again.
Hope it helped . Thank you for watching.
@@AndrewSME absolutely thanks a lot
You should change the title if its not an actual REPAIR but REPLACEMENT
Because that means we have to BUY another tip (that will also fail easily at the end)
Yes, I Got It. Thanks for your advice. PATCHLOC rj45 locking clips is another alternative solution. Thanks for watching.🌹💗
No background noise/music please.
Who else thought he was going to slice his finger with that craft knife?
I appreciate you showing us how to fix (replace) the plug. But I find it hard to understand if you already have a crimper on hand to properly replace the RJ45 plug correctly. This is not good for the connectors as you bent the plastic very poorly and could later cause a very bad connection in the near future. I strongly do not recommend this type of DIY for a first timer, plus this can cause injury to them if their not careful. PEOPLE, Please use the proper tools for this so that you don't have to repair the plug down the line in the future or have to injure yourself also. REMEMBER SAFETY FIRST!!!
Before the invention of tools people used the laymen method, there may be a certain class of people who don't want to spend extra money on something they can fix themselves it's safe from an environmental point of view , so reduce reuse and recycling.
may issue ako about sa modem B525 using smart corpo ko to smart switch tapos kumonect sa switch 10 pc sa computer shop ko at isa sa kabilang bahay tru lan cable papuntang router nila always nawawa net nagkala kulay yellow triangle sa internet icon sa ng mga PC ko if bununutin ko connection ng kabilang bahay na kumonect sa TP link swith ko at ibalik after 5-10 seconds bumabik na connection nawawala na ang yellow triangle sa icon mg internet sa mga PC ko sa shop ko, ano kaya probs? salamat sa maka sagot
is it the IP ADDRESS of the computer conflict? try to change the fix IP address of this computer.
wont i die from the electricity?
not work for me
Niceee dudeeee :D
Thank you so much. Thanks for watching. 💗🌹
and remember to have the connector in the right orientation or your cables will be the wrong way round!
yes, Thanks for sharing.
Use crimping tool
Yes Thanks for sharinf.
Crimping tool is much easier to fix the RJ45 connector. th-cam.com/video/TbnLlYvnoZc/w-d-xo.html
But for those user doesn't have or not necessary to have the crimping. They can use this method.
yup hands is better
Thanks for watching.
Instructions unclear. I connected to NASA. Now FBI is behind be
Wow ! Don't worry, FBI wont care about this small thing. FBI got BIG thig to do..
Worst surface to do that on...
for a few cents i don't waste my valuable time
👍 Thanks for watching. 💗
Well it is often fascinating to acquire new knowledge. Moreover, if more people tried to fix things instead of dumping them it would be better for the world and environment.
Ez now I can play csgo with low ping
Connection will easily get loose
Doesn’t work I just cut wire and there was 2 colour red and green :(
And I can’t get the rest of the cut wire out of the plastic thingy
next time, no music and better speech.... and dont work on such a carpet ;\
Thanks for watching & your comments.
Video is good but the music is bit too much.
Thanks for you advice. Means, like this type of video with VOICE better don't put any background Music. I will take note on it. Thanks You.
@@AndrewSME I liked the music man thank you
he broke it on purpose... what even is life???
Who Broke it on purpose. TELL ME ! TELL ME !
@@AndrewSME me! and I don't even have the tools 🥲
Your fingers will injured soon with cutter and the surface of towel also badest
Co może pójść nie tak xD
My cable has 4 wires
Can't deal with the music, next video
Your carpet looks like mince meat
Is anyone there to help me this I'll pay it.
What?......the f'ing music!
Thank You for watching. ❤️
can barely hear the guy
more like replace not repair
Music ruins everything
Thank You
Poca experiencia y herramientas inadecuadas. Mal ejemplo
Gracias por ver
Fool lol !!!
Too much hassle. Crimped only costs around a fiver
That is not fixing !!