Hey, thanks! This is exactly what I was looking for! Two things though: 1. The #3 pad should be almost 70mm long. 60 is too short. 2. I'd recommend putting the pads where they go on the gpu board, and not the heat sink. Reason being, that you can actually see that they are covering what they need to, instead of hoping they do. Kudos though, for your hard work.
@@GabrielSGSCheck these links forums.tomshardware.com/threads/gtx-1070-8gb-what-thermal-pads-do-i-need.3766576/ th-cam.com/video/KeA9BV6cnxM/w-d-xo.html
Dont use different size from originals. Can be very risky sometimes. Yours card may have different from mine so if you need to replace some pads check size and replace them. In this card don't replace with 1mm. You can overheat the gpu use exactly the same
@@pctechbuild40 ok i understand thanks, I have the exactly same as you 1070 gigabyte. So I should buy the exact same as you in the video or? The ones with 1mm and 0,5mm?
@@amnabb99028 I think you can try to buy the same. But be carefull the 0.5mm must be 0.5mm same for the others. But also width and height must be the same with original pads
@@nitish4700 Hi my friend! Replace thermal pads and Thermal paste with quality parts. Try Thermal Grizzly paste and Thermalright or other quality pads. Try 12w/m.k and above. Check description for dimensions. You must be careful with the pads positioning. Not close where are screw holes.
@@nitish4700 This one for 1mm www.thermalright.com/product/odyssey-thermal-pad-1-mm/ and this for 0.5mm www.thermalright.com/product/odyssey-ii-thermal-pad-85x45x0-5mm/ But be carefull how you cut the pads and don't waste them. eg fot the 0.5mm you must cut 45mm/3 to be 3x15mm
Hey, thanks! This is exactly what I was looking for!
Two things though:
1. The #3 pad should be almost 70mm long. 60 is too short.
2. I'd recommend putting the pads where they go on the gpu board, and not the heat sink. Reason being, that you can actually see that they are covering what they need to, instead of hoping they do.
Kudos though, for your hard work.
Yes a good thought. Heatsink have marks most of the times so you can put pads exactly in these marks
great videos, but I can't look the benchmarks. I have YT suggestions that hide everything 😑
Hi my friend! i have removed suggestions for you to see the benchs
Do you know size of the thermal pads, but for the Gigabyte 1080 windforce version? It looks exactly like this video card
Yes of course check the description
I have the Asus Turbo 1070TI, are the thermal pads the same thickness as in your Gigabyte version of the card?
Hi! No i don't thinks so. Sometimes exactly same cards have different size pads
@@pctechbuild40 is there anywhere on the web where i can find this information?
@@GabrielSGSCheck these links forums.tomshardware.com/threads/gtx-1070-8gb-what-thermal-pads-do-i-need.3766576/
th-cam.com/video/KeA9BV6cnxM/w-d-xo.html
@@pctechbuild40 thank you 🙏
Non of those mesurement fit my card.
How did you mesure?
Hi , is the sane gpu? measured with a millimeter meter but sometimes are not the same.
How many thermal pads do I need to buy for this GPU?
5 Pieces but check the description for dimensions
Is it a problem if I don't have pads with 0,5mm Bc I only have with 1mm? Or can I just use it
Dont use different size from originals. Can be very risky sometimes. Yours card may have different from mine so if you need to replace some pads check size and replace them. In this card don't replace with 1mm. You can overheat the gpu use exactly the same
@@pctechbuild40 ok i understand thanks, I have the exactly same as you 1070 gigabyte. So I should buy the exact same as you in the video or? The ones with 1mm and 0,5mm?
@@amnabb99028 I think you can try to buy the same. But be carefull the 0.5mm must be 0.5mm same for the others. But also width and height must be the same with original pads
@@pctechbuild40 thank's very much.
@@amnabb99028 You are welcome
I have the same Exact GPU but my Gpu is overheating like 93°C and Gpu hotspot temprature to 105°C 😭😭
Please Help!!
@@nitish4700 Hi my friend! Replace thermal pads and Thermal paste with quality parts. Try Thermal Grizzly paste and Thermalright or other quality pads. Try 12w/m.k and above. Check description for dimensions. You must be careful with the pads positioning. Not close where are screw holes.
@@pctechbuild40 how many therman pads or pacaets i needed to order like 2,3,4 how many?
@@nitish4700 This one for 1mm www.thermalright.com/product/odyssey-thermal-pad-1-mm/ and this for 0.5mm www.thermalright.com/product/odyssey-ii-thermal-pad-85x45x0-5mm/ But be carefull how you cut the pads and don't waste them. eg fot the 0.5mm you must cut 45mm/3 to be 3x15mm
Thank you my friend, i ordered both the thermal pads and the paste let's see how it goes, I'll update you after applying the pads 🙂👍
Do u have a link for this
About what you need a link?
@@pctechbuild40 its fine one question after buying when cutting if the length is abit of it should be fine right
Alguien tiene el esquematico de esta tarjeta?
I think all 1070 with 3 fans are the same
Serve para a mesma placa mas a 1070 g1 gaming oc? Os tamanhos dos thermals. Tem link do thermal pad?
Can you ask your question in english?