By far…the absolute best video instruction for exactly what I needed to install this. You have taught so many so much! Incredibly detailed and organized. You are AMAZING brother and I am so SO happy I found your page. Please keep making these much needed videos and content.
I watched 3 or 4 videos before going to install my Ring floodlight and this was by far the most helpful. Thank you very much for the video. I'll definitely be subscribing!
EXCELLENT instructional video. Exactly what I was looking...this video now gives me the confidence to install the ring floodlight myself. Thanks again and keep up the great work!
Thanks for vid. My kids gave me TWO RING PRO FLOODLIGHTS (wired) for Christmas a few years ago. No previous wiring , so have to copy your instsllation. I didn't know you could put the gangbox on the outside.Gonna install them this weekend. i just subscribed. Thanks!
I have a double gang light switch feeding the old floodlight above the rear entry... I'm tempted to just keep using the switch but have to basically keep it in the on position all the time hahaha ...
You can do that or 1. You can take the 2 wires off the switch, wire nut them together to have constant power & put the existing switchback as a “dummy switch” 2. You can take the 2 wires off the switch, wire nut them together to have constant power & remove the old switch install a blank on the existing cover.
Good video. I enjoyed the long form. Not gonna be a cabron pero, mijo. Dos cosas 1. From what i noticed, you either didnt( or didnt explain) removing the wire from the recep that you initially cut when resplicing the wires in the attic. Harry homeowner wont even bother and have hot exposed connections sticking out the back of his outlet and wonder why his shit keeps tripping or blasting him 2. You used the orange wire nuts that came with the light. Sure theyre UL listed and fine but might as well just use tans or your red tans. On any job ive ever been on, the orange nuts immediately go in the trash. Unless were using em to cap a dead circuit or just grounds. Wasnt shitting on you or nitpicking too hard, as i enjoyed coming along for the ride in this video. And your "apprentice" seemed helpful, but green ha. Good shit, compa. Im subbing and gonna keep an eye out for more vids Sorry for the novel. Be safe out there
Hi Sparky Izzy, great video. I'm about to install a Ring Spotlight Pro (wired) at my mom's house. Rather than use the outdoor outlet, I'd like to pick-up power from an existing porch light about 15' away. From what I've read, it seems as though I should use that 14/2 Romex and run it behind the siding, obviously waterproof. Thoughts, am I on the right track? Thanks!
I wouldn’t recommend this. If you connect to the existing porch light, everytime the porch light gets turned off …. The Ring Spotlight Pro camera will turn off. You want all security cameras to have constant power, no switches.
@@sparky_izzy I should have been more clear. I plan to switch the porch light bulb to a smart bulb on a scheduled on/off. The switch will always remain in the ON position providing constant power to the security device but the bulb will toggle on/off based on the times that I establish within the app.
@spea111 okay then you should be fine. When you say behind the siding, I would imagine you mean behind the wall in between the wall studs. If so, you are on the correct path 👍🏽
don't you love that the Ring base is bigger than the outdoor box you should have put a seal tight connector on the back side of the box and seal those screw plugs up
Took about thirty minutes to install on my separate shop building. But....my son spent an hour trying to connect to the Ring app. He finally gave up. Now I have spent at least two hours trying to get thru the Ring hoops. Sending the wrong verification code, timing out etc. Finally, it tells me I have to buy a Ring chime to get the weak signal from my house to the shop. Grrrrr.
If the circuit is on a 15amp breaker you want to use 14awg romex. (14/2 - white romex) If you have a 20amp breaker you want to use 12awg wire. (12/2 - yellow romex)
By far…the absolute best video instruction for exactly what I needed to install this. You have taught so many so much! Incredibly detailed and organized. You are AMAZING brother and I am so SO happy I found your page. Please keep making these much needed videos and content.
Glad it was helpful!
Crystal clear instructions
Best video I've seen, very detailed and easy to follow. Well done sir. I feel much more comfortable hooking one of these bad boys up.
Glad you liked it!
I watched 3 or 4 videos before going to install my Ring floodlight and this was by far the most helpful.
Thank you very much for the video. I'll definitely be subscribing!
EXCELLENT instructional video. Exactly what I was looking...this video now gives me the confidence to install the ring floodlight myself. Thanks again and keep up the great work!
Very helpful detailed step by step explanation for how to install the floodlight cam. Thank you!
Thanks for the detailed video on the circuit box and wiring. Very helpful.
Outstanding Izzy....Great Instruction....truly from start to finish.
Thanks for vid. My kids gave me TWO RING PRO FLOODLIGHTS (wired) for Christmas a few years ago. No previous wiring , so have to copy your instsllation. I didn't know you could put the gangbox on the outside.Gonna install them this weekend. i just subscribed. Thanks!
Great job explaining. Lol your lucky to already have an outlet I’m not so lucky.
Because of this video I subscribed to your channel! Well done. Very clean install.
Thank you!
I have a double gang light switch feeding the old floodlight above the rear entry... I'm tempted to just keep using the switch but have to basically keep it in the on position all the time hahaha
...
You can do that or
1. You can take the 2 wires off the switch, wire nut them together to have constant power & put the existing switchback as a “dummy switch”
2. You can take the 2 wires off the switch, wire nut them together to have constant power & remove the old switch install a blank on the existing cover.
@sparky_izzy thank you for the ideas that would be a better solution
The best video BY FAR!! Keep up the amazing work.
Elite video.... Wish I had the skill to do this.
This was just the best and I'm going to follow your instructions! If I don't get electrocuted, I'll let you know how it went......;). Thanks.
would you mind sharing about how much you’d charge for this? thank you!
Great question. If I hired a electrician or handy man I would like to know the average cost
Do it yourself . Why do yoh even watch TH-cam ?
400$
Well done -- very nice *concept*-step-by-step..., And great video point of view provided to the viewers...,
Nice job. Thank you for sharing your knowledge.
Great video, but it will have to be relocated if gutters are ever installed.
Good video. I enjoyed the long form. Not gonna be a cabron pero, mijo. Dos cosas
1. From what i noticed, you either didnt( or didnt explain) removing the wire from the recep that you initially cut when resplicing the wires in the attic. Harry homeowner wont even bother and have hot exposed connections sticking out the back of his outlet and wonder why his shit keeps tripping or blasting him
2. You used the orange wire nuts that came with the light. Sure theyre UL listed and fine but might as well just use tans or your red tans. On any job ive ever been on, the orange nuts immediately go in the trash. Unless were using em to cap a dead circuit or just grounds.
Wasnt shitting on you or nitpicking too hard, as i enjoyed coming along for the ride in this video. And your "apprentice" seemed helpful, but green ha. Good shit, compa. Im subbing and gonna keep an eye out for more vids
Sorry for the novel. Be safe out there
Very informative bro! 🙌🏽
Thank you for sharing!
Exceptional content!
Best video ever
Hi Sparky Izzy, great video. I'm about to install a Ring Spotlight Pro (wired) at my mom's house. Rather than use the outdoor outlet, I'd like to pick-up power from an existing porch light about 15' away. From what I've read, it seems as though I should use that 14/2 Romex and run it behind the siding, obviously waterproof. Thoughts, am I on the right track? Thanks!
I wouldn’t recommend this. If you connect to the existing porch light, everytime the porch light gets turned off …. The Ring Spotlight Pro camera will turn off. You want all security cameras to have constant power, no switches.
@@sparky_izzy I should have been more clear. I plan to switch the porch light bulb to a smart bulb on a scheduled on/off. The switch will always remain in the ON position providing constant power to the security device but the bulb will toggle on/off based on the times that I establish within the app.
@spea111 okay then you should be fine. When you say behind the siding, I would imagine you mean behind the wall in between the wall studs. If so, you are on the correct path 👍🏽
@@sparky_izzy Hello ... behind the exterior siding. Between the siding and plywood on the outside of the house. Not on the inside, between studs.
@spea111 yeah that’s not up to code: It would need to be behind the wall or over the siding installed in conduit.
Nice job, Bro!! Thank you!!
Thank you so mich ! I appreciate this video and it helps. New sub here.
don't you love that the Ring base is bigger than the outdoor box you should have put a seal tight connector on the back side of the box and seal those screw plugs up
Took about thirty minutes to install on my separate shop building. But....my son spent an hour trying to connect to the Ring app. He finally gave up. Now I have spent at least two hours trying to get thru the Ring hoops. Sending the wrong verification code, timing out etc. Finally, it tells me I have to buy a Ring chime to get the weak signal from my house to the shop. Grrrrr.
Will it still work without the ground wire?
Question, how do I know if I have a 15 or 20 Amp? I'm installing to my garage door outlet.
If the circuit is on a 15amp breaker you want to use 14awg romex. (14/2 - white romex)
If you have a 20amp breaker you want to use 12awg wire. (12/2 - yellow romex)
I now know where I went wrong; I didn’t have a little helper to read the instructions to me😊😅
Thank you.
Wouldn't it be better to install it under the eave?
You can do either or. I have since added a roof deflector to allow the flow of rain water to the left & right of the fixture.
No roof drippage??
I have since added a piece to block the water
Eufy .. Better and no monthly fee ...