How to change scooter front brake master Cylinder & Lever
ฝัง
- เผยแพร่เมื่อ 10 พ.ค. 2017
- How to change scooter front brake master Cylinder & Lever
• How to change scooter ...
Donate to Virberello for Parts rb.gy/gzrtit
Chinese Scooter Service Manual amzn.to/2LBfWb8
Hello I hope this video will help you to change your front brake master Cylinder & Lever on your scooter, motorcycle, atv, gy6 scooter, taotao, kymco the part on line is around $12.00 to 15.00 at the moment. Check on Amazon $15 plus $3 shipping amzn.to/2uPKFZJ
Thank you for watching my video - แนวปฏิบัติและการใช้ชีวิต
Excellent video showing a real scooter owner repairing their Scooter properly and in real time. Thanks for posting this well photographed video as you just saved me about $50 + in mechanics costs.👍
Hello Vic Thank you for watching my video and I'm very happy to you save money
I subscribed to you a while ago and you have helped me so much on fixing my husbands scooter. I just want to thank you for your great videos.
Hello my friend thank you for watching my videos and if you need any help feel free to contact me anytime
Great video, excellent step by step instructions. I replaced my Vespa LX 150 brake lever/master cylinder because the mirror perch was built in and broke off. Much better than trying to repair the mirror threads. Thanks for posting!
Thank you for the video. It was very informative and easy to follow.
Thank you for watching my video
just buy a cheap second 150cc scoot in a bad shape and been working on it for like 2 weeks and this weekend i will finish it, only problem it has not come with the front brake but the drum in the back do a very good job to stop in time, i will not put a front brake because i will ride it less then my main scooter. Your vids that i watched before help me a lot put this scooter in top condition. Peace from Romania
Thank you my friend for watching my videos :-)
Thanks alot man.. really helpful
Thank you for watching my video
great video
Thank you for watching my video
You need to bleed the line at the front caliper. Otherwise you will have air in the line and reduced braking power. You probably noticed it when testing.
Hello David yes I agree bleed the line will be the best and safest to make sure there is no air in the line but for now is 9 months testing the breaks and they are working great Thank you for watching my video
Any suggestions why my scooter makes a ping noise in front break area when starting from park? While riding it's fine. It only occurs after turning off engine then starting at first rolling.
Does anyone know the screw type/name for the screws on top of the master cylinder? Many thanks in advance!
very helpful friend thank you
Hello my friend thank you for watching my video
Good
Hello my friend thank you for watching my video
Gracias
Hola de nada un placer ayudarte
hey are u going to do the video I requested.. to show how to hook up the the lines back up including the vacuum hoses
Hi Giovanny I think next week I will start that video .
Thank you for watching my video :-)
The bleeder valve sheered right off while trying to loosen it. Anyway to get it out without trashing the caliper?
Omg no bueno George this is a very delicate situation you can try to buy a Damaged Screw Remover Set,Screw Remover and Extractor Set on amazon amzn.to/2E3LyzJ this can help you but you need to pay attention to do not damage the caliper trading and if you do damage you will have to place a larger breeder valve or a large screw and retread the caliper hole. Good luck my friend and take your time to do this job to make sure you do it right.
Thank you for watching my video
Do we need to plug in some cables into the brake light switch?
Yes you have reconnect the wires
Is that a Vento scooter? I really need a replacement for the fairing that goes around the headlights like yours. Any idea where I could find one?
Hello my scooter is chinese with a 150cc gy6 motor for scooter part I find lots of things on www.partsforscooters.com/ or many time I go to ebay or amazon Thank you for watching my video
How can you tell it’s the master cylinder that broke and not your caliber? My brakes not working on my scooter and I’ve tried everything
Hello 99.9 % of the time is the master cylinder that gets gummed up the only way to test the caliper is to removed but not disconnect the hose push the pistons inside with a g clamp and disconnect the hose line at the master cylinder and with a oil pump push new brake fluid in the hose and check if the brakes pads are closing there is also a possibility that the hose is gummed up
Do you have a video for replacing the other brake lever.
It broke off, but it's not the lever itself, its what the lever attaches to
I guess that's a no??
Okay
Thank you for watching my video
Hey can you make video
Showing how to adjust scooter front brakes
Hello Ron you can not adjust the front brake like you do with the rear brake when your front brake on the chinese scooter is to soft you need to replace the brake pads if the brake lever is really hard the brake fluid is really thick like glue from aging if you get to that point I will replace everything because to clean the all system will take you 20hr but if you think that the only problem you have is oil pressure pull your brake lever five times and do not release at the fifth pull at that time open the little valve at the caliper ( have a little towel to clean break fluid ) and close right away right after you can release the brake lever at the handlebar that will give you oil pressure back in the system.
I hope this can help soon I will make a video regarding this topic for now thank you for watching my video and be safe
hey man I have a weird situation here. if I could ask you this... when I try and start my scooter and turn on ignition switch and squeeze the brake lever...the scooter tries to turn over?? before I even push the start button. any idea of what might be going on here?
Hello my friend this sound like bad starter switch that have built up corrosion try to spray wd 40 contact cleaner amzn.to/3Pre0TZ inside the starter switch that should work or replace the switch
@@VirberelloScooterTips once again thank you for taking the time to give some advice. I really appreciate your knowledge. I will let you know what happens as soon as I fix the damn flat now. lol.
@@s.f.morris7331 Thank you for watching my video
I really want to change the front brake by myself. The scooter store will charge me $75 dollar for changing a new front brake which is kinda crazy.
Hello Ming yes they charge $75 or more +++ but you can do it yourself just relax listen some good music and you can replace your brake in only 30 minutes check my other video th-cam.com/video/lB779OEx7no/w-d-xo.html if hat can help you. Thank you for watching my video
I replaced my caliper and the entire brake cylinder and all. After bleeding the line the brake still wont pressurize. I am not sure why. I don't see any kinks in the brake line
Hi Cody open the valve at the break caliper press the break level until you see little break fluid coming out close the valve without releasing the break level and after closing the valve test your break.
Thank you for watching my video
This guy is definitely not a mechanic
Hello Gary no I'm Not you right but I never go to mechanic and I share with the youtube comunity how to avoid to go to a mechanic thank you for watching my video