Why suction line diameter is bigger than discharge line diameter in centrifugal pumps?

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ส.ค. 2024
  • Why suction line diameter is bigger than discharge line diameter in centrifugal pumps?
    There are 4 main reasons, that's why keep the pump suction side diameter greater than discharge side.
    1) To avoided cavitation
    2) For Net positive suction head Available
    3) To Avoid Turbulence
    4) To get better Performance or efficiency
    please like and subscribe the Channel.
    pump head,
    pump suction,
    pump discharge,
    static head,
    dynamic head,
    total head ,
    NPSHA,
    NPSH Required,
    NPSH Available,
    Pump performance curve,
    pump characteristics,
    head vs flow in pump,
    centrifugal pump interview questions and answers,
    pump interview questions and answers,
    interview questions and answers,
    Pump QNA,
    Centrifugal pump QNA.
    Frequently asked questions and answer on centrifugal pump
    • Centrifugal Pump Inter...
    6 Basic Rules for Centrifugal Pump Piping 👇
    • 6 Basic Rules Of Centr...
    Pressure Drop Calculation 👇
    • Pressure Drop Calculat...
    Blowdown in Boiler 👇
    • Blowdown In Boiler Ani...
    Line Sizing Calculations step by step,👇
    • Line Sizing | Pipe Dia...
    join our Facebook group "chemical engineering world 2 "
    www.facebook.c...
    Like our Facebook page
    / chemical-engineering-w...
    chemical engineer online Facebook group
    www.facebook.c...
    article on types of Reflux in distilation column
    pharmaguides.i...
    ‎‪@ScienceStory2‬
    classification of heat exchanger
    pharmaguides.i...
    structured packing used in distilation
    pharmaguides.i...
    different types of Reactor
    pharmaguides.i...
    #pump
    #centrifugalslurrypump
    #pumping

ความคิดเห็น • 7

  • @Sqb1998
    @Sqb1998 6 หลายเดือนก่อน +1

    Good job❤

  • @aniketwaghmode6407
    @aniketwaghmode6407 6 หลายเดือนก่อน +1

    What happen when pump suction and discharge pipe size same ??

    • @chemicalengineeringcourses6
      @chemicalengineeringcourses6  6 หลายเดือนก่อน

      It depends on the process, in some cases it will be ok. If you design pump suction line size as per NPSH then in that case it might be ok,

  • @calmmusicvideosvlog8716
    @calmmusicvideosvlog8716 3 หลายเดือนก่อน

    Speak loudly

  • @srinivasgupta5406
    @srinivasgupta5406 6 หลายเดือนก่อน

    Sir please have more energy while explaining.