Great video is there a way to connect you directly, do you have a course or classes to join you, and about the excel sheet I would have a copy of it or at least a video how to build it
Thanks for the comments. You can email me at hoseyhowto@gmail.com if you have any questions. The spreadsheet can be downloaded from the link in the description. Hope you like my other videos too.
An area network supply is a very complex and many iterations calculations is required. An engineering software shall be used instead of calculated manually. Hope this addressed your question.
Please refer to my video "How to create the system characteristic curves for multiple tanks pumping" th-cam.com/video/vcr59tN1wMk/w-d-xo.htmlsi=IFKgFq2UAizCGEQa
Very impressive spreadsheet and very extensive knowledge regarding liquid hydraulics. Is there a possibility this spreadsheet could be modified to include all data in US units? I understand that is likely not easily done but am very interested. Thank you!
Hello sorry i know its been a while since you uploaded this video, but for testing purposes i put the same data as you did in the video but the Friction factor in fused it gets me a bunch of ##### and the new is in 0.0000 could you please advise me
Thanks for the comment. Please refer to my video "How to create System Characteristic Curves for Multilple Tanks Pumping" th-cam.com/video/vcr59tN1wMk/w-d-xo.htmlsi=IFKgFq2UAizCGEQa.
@@hoseyhowtochannel8235 Thank you for your prompt response. So, this means that for sizing pumps for a complex system such as a water distribution network where I can specify demands, I should use commercial software such as Water Gems. I was wondering if a spreadsheet is available for such cases.
@@mysteryjafaro it is recommended to use commercial software to analyze the multiple tanks system as it would be very tedious and complicated if pumping to more than 2 tanks simultaneously.
Please go to the end of the description. A link to the spreadsheet is included. Make sure you have enabled the excel iteration option before running the spreadsheet.
your are a professional, thanks so much for your helpful video, it was simple to understand, Could your please unprotect your file to do some modifaction realated to my major
Thanks for your comment. Hope you will like my other videos as well. The spreadsheet is protected to avoid any accidental changes to the formula that causes errors. Hope you can understand!
I shared the spreadsheet at the bottom of the description. Please check on the link. You need to allow the excel iteration option to enable the calculations.
Thanks for your explanation.. Could u pls inform me the password to unprotect sheet? i would like to do a simulation with your this workbook.. thanks in advance
Thank you for the comment. The spreadsheet was protected to ensure no error and to avoid any changes by mistake. Hope you understand and appreciate your support!
The best education there is. A university-level standard. Too bad this video didn't exist 10 years ago.
Thanks for your comments. Great to know that you like it. Please try my other videos!
Great, excellent video, thanks.
Thanks. Hope you like my other videos too!
I have a problem with the excel table
The calculated value of the discharge header is several times higher than normal.
Did you enable the Excel iterative option? Can you please send the input and your results for checking?
Great video is there a way to connect you directly, do you have a course or classes to join you, and about the excel sheet I would have a copy of it or at least a video how to build it
Thanks for the comments. You can email me at hoseyhowto@gmail.com if you have any questions. The spreadsheet can be downloaded from the link in the description. Hope you like my other videos too.
Superb thanks sir ❤❤❤
Thanks for your comment. Hope you also like my other videos!
Can we have an example for a calculation for left station serving certain area with known flow
An area network supply is a very complex and many iterations calculations is required. An engineering software shall be used instead of calculated manually. Hope this addressed your question.
Excellent work
Thanks. Hope you like my other videos!
This is a great job. Is there a spreadsheet that does the same thing for a branched pipe network with demands instead of a single pipe?
Please refer to my video "How to create the system characteristic curves for multiple tanks pumping" th-cam.com/video/vcr59tN1wMk/w-d-xo.htmlsi=IFKgFq2UAizCGEQa
Very impressive spreadsheet and very extensive knowledge regarding liquid hydraulics. Is there a possibility this spreadsheet could be modified to include all data in US units? I understand that is likely not easily done but am very interested. Thank you!
Thanks for your comments. I have not thought of using the US customary unit. This would definitely be one of my future videos.
Fantastic, i have been looking for something like the excel for some time, if possible could i obtain a copy?
I have shared the spreadsheet in the link at the end of the description.
Hello sorry i know its been a while since you uploaded this video, but for testing purposes i put the same data as you did in the video but the Friction factor in fused it gets me a bunch of ##### and the new is in 0.0000 could you please advise me
The spreadsheet is using interactive calculations. Please enable the iteration option in the MS Excel. Hope this helps!
A spreadsheet that does the same thing for an actual water distribution network would be great if available.
Thanks for the comment. Please refer to my video "How to create System Characteristic Curves for Multilple Tanks Pumping" th-cam.com/video/vcr59tN1wMk/w-d-xo.htmlsi=IFKgFq2UAizCGEQa.
@@hoseyhowtochannel8235 Thank you for your prompt response. So, this means that for sizing pumps for a complex system such as a water distribution network where I can specify demands, I should use commercial software such as Water Gems. I was wondering if a spreadsheet is available for such cases.
@@mysteryjafaro it is recommended to use commercial software to analyze the multiple tanks system as it would be very tedious and complicated if pumping to more than 2 tanks simultaneously.
Please can I have the excel spreadsheet
Please check the link at the end of the description.
Please I need this exel sheet
The spreadsheet is in the link at the end of the description. Enjoy!
please can i get this Excel sheet?
Please go to the end of the description. A link to the spreadsheet is included. Make sure you have enabled the excel iteration option before running the spreadsheet.
Hello sir can I get the sheet
Sure, please PM your email.
I have shared the spreadsheet in the link
@@Punith_Gowda Please check the link at the end of the description.
your are a professional, thanks so much for your helpful video, it was simple to understand, Could your please unprotect your file to do some modifaction realated to my major
Thanks for your comment. Hope you will like my other videos as well. The spreadsheet is protected to avoid any accidental changes to the formula that causes errors. Hope you can understand!
Can i have your spreadsheet? Thanks
Spreadsheet refers to the link at the end of the description.
Nice work mate . Can I get spreadsheet. If it's easy for uou
Sure. Please pm your email.
@@hoseyhowtochannel8235hi may i request for the spreadsheet
@@emmanclaris2307 I have shared the spreadsheet in the link.
I shared the spreadsheet at the bottom of the description. Please check on the link. You need to allow the excel iteration option to enable the calculations.
Please make excel sheet for water supply system design to houses
Thanks for your idea. This will be my future video 😊👍
Thank you for your interesting video. It was simple to understand. Could you please share your spread sheet
Thank you in advance
Hassan Berbia
Thanks for your comments.
Please send me your email for the excelsheet.
@@hoseyhowtochannel8235 Dear Sir, Have you received my email address ?
@@hassanberbia2834 Hi, I have share the spreadsheet in the link.
@@hoseyhowtochannel8235 Thank you
Maybe there are some circular references
@@hassanberbia2834 Please enable the excel iteration option for the calculations. Hope this help!
Pl share spreadsheet
The spreadsheet is provided in the link at the end of the description. Enjoy!
Thanks for your explanation.. Could u pls inform me the password to unprotect sheet? i would like to do a simulation with your this workbook.. thanks in advance
Thank you for the comment. The spreadsheet was protected to ensure no error and to avoid any changes by mistake. Hope you understand and appreciate your support!
Can I have the spreadsheet? What’s your email?
Sure. Please PM your email.
@@hoseyhowtochannel8235 can I have your email address so that I can PM you?
I have shared the spreadsheet in the link.
Hello dir this is the best education here .could you pls share the password for this excel sheet.
Hi thanks for your comments. The spreadsheet is protected to avoid any changes to the formula that caused errors. Hope you understood. Cheers!
This is just literature, no effective information or knowledge transfer.
Thanks for your comment. Sorry to hear that this video was not effective for you. Hope you will continue to watch my other videos!