You should have put some locking casters on your table so that you can move it around more easily. You probably would want to move it out to the center of the stall to use it.
TRENTS NOT STUPID....IM SURE HE WILL MOVE IT WHERE HE NEEDS IT WHEN HE WORKS ON THAT TRUCK. U MUST NOT WATCH TRENT N ALLIE.....BECAUSE IF U DID...U WOULD KNOW THAT THEY BOTH ARE PRETTY SMART!!!!! JS
This is what I came to reply … And btw it doesn’t have anything to do with T & A being “stupid” It was just an observation … Those tables are very heavy … Table looks good and sturdy to me … Great job
Perfect time for reflection... Take a deep breath...everyone can use a litte advice and suggestions, the good thing about them both is you can take them or leave them, meaning not use them. And if I know Trent and Brandon, they more than likely have something better planned for the uses they will apply this table for but sure they appreciate all ideas...you never know when someones will be of help.
@@freekimsurr Hope you have a wonderful day. Rainy here and perfect reason to stay in jogging pants and watch football!! Dallas fan here, hubby a Carolina fan. Have an amazing day and week😀
Art, not only is your comment very true, you are one of the few that spells Branden's name correctly. It's nice to see someone here paying attention. 😃
@@51-FS Well Joa "Karen" Drike, please refer to my "paying attention" comment. Are you Joey or Joel or Job or Jimmy, Jim, Jasper, Jake or just plain Jerk? Or do you prefer Karen?
Trent, you remind me of my brother-in-law. Jack of all trades. If he doesn’t know how, he figures it out with books or you tube. He became a pilot of a helicopter, bought an older 60’ish helicopter, used it to get his hours. Turned around an sold it. So it really only cost the gas and time. He then got a promotion at work (LE) became the top man that gave final tests throughout the state for others that flew for our department. He just has a mind like yours. Love your family and Brandon 😊👍
I know absolutely zero about most of the things that you do, but it's so much fun to learn how to build, wire, plumb, and weld by watching you. I had no idea how to purchase steel; I had no idea that there were shops that sold it. Thanks for showing us how to do so much.
I couldn’t comment earlier. I had a thought that you could add casters to the table to make it easier to move around as you use it. I love seeing Brandon behind the camera. Multi-talented guy!
Locking and unlocking casters each time you move a heavy duty work table is unreliable. I would much rather have it right where Trent has his: with a wall backing. Space to maneuver for clamping is easy enough because he can slide the table out a few feet without difficulty. Stability is an absolute on a heavy metal table that will be used for welding often times large, awkward objects.
So glad too see Brandon is helping with you on this channel.. I’m so happy for you I wish I could get my channel as many likes that you have.. I need too borrow Allie to show how too video my videos .
I love everything you do and show. It is about you folks and what you do. Love all the different things that I get to see when Alli does the editing and music for each episode.
Doing great. It’s good that you introduce Brandon to this video I have followed you from just before Covid all I can say is good one guys and you are never short o a surprise in store. Take care see you on the next one.
By the way good luck with all the snow. I guess you could put a bucket on the front of your tractor and dig your house out. Allie is a real trooper shoveling all that snow.
Trent , Its great to see Alley filming,that means twice as many videos coming from you. Great table project, Iam waiting to see more, Hug Frank the dog for us.
It would be nice at the end of your videos to say and I would really like to thank Brandon for getting up here in this treacherous weather to help me!! Just sayin. It going to be great watching you rebuild your rock crawler
You're doing awesome Trent, please don't doubt yourself or take criticism to heart. Great job!! Yay love seeing Brandon helping he is doing wonderful job. You both deserve a big oat on the back...wooooo high 5! Sending Loves and pat on back to you all!! ❤️ Be safe, from your fan in Vancouver BC ❤️💋🇨🇦
Oh wow! metal can be heavy for sure, and I think that you did a good job fabricating it. I think it needs some wheels or something to make it a lot easier to move around since it is so heavy. I am excited to see the truck get worked on. Thanks for a great video to watch have a great day, sending love and hugs, bye! 😂👋👍💜💜💜
YAY! Great video, interesting table (needs casters) it is great to get to see this from the beginning with you and Brandon and Allie getting the shop setup. Keep the videos coming
casters are a good idea, especially in a small shop . the ability to roll the table outside to weld is important. now Trent is welding cutting and grinding against a wood wall.
Welding work bench looks great Trent; the other consideration I have is maybe casters that lock, so you can use the bench, but roll it when you need to move it around in the garage. Pretty awesome job!!
Wow! I criticize what you do as a home builder but your fab/welding is really skillful! I'll admit I'm jealous of your welder and your welding skills. Props to you.
Trent - Aside from what you've said, the fact that it sits flat, is great. As well, I built a worktable similar about 30 years ago, and I might wipe it down with an oily rag every 5 years, and still, no rust. As well, a hint to the wise, take a grinder and round off those sharp corners on the top plate. Your hips, and Leo's head, will probably thank you for that.
Nice weld beads Trent ...for future reference ,worry more about the millscale than anything else . You can lay the best bead in the world but if you don't grind off the scale they will be weak ... On a side note ....please make your build videos longer 😊😊
@@annelowry357 Mill scale is flaking on the surface of the metal after it is formed in the mill. "during welding, mill scale hinders the flow of the liquid weld pool, often causing an undesirable weld appearance or contour. Mill scale also can impede penetration into the base material and cause a lack of fusion and weld inclusions"
I used to Farm and did tons of welding with a mig, I always grinded my welds clean before I layer down the weld , just works so much better. You figure it out as you go along, practice makes perfect
I don't know the answer to the quiz question, but my hubby does it within seconds... lol! He's a journeyman ironworker/rigger. He said the steel sheet weighs 528#'s and that steel weighs 44 #s per square foot. Then he broke down the math to me.... lol! He's so darn smart.... lol! So love this channel to Trent. 😍
I was not disappointed with the content of your video. As a matter of fact , I was glad to see that you are filming with your good friend Brandon. Good luck on the next one.
Nice to see Brandon with you on this episode! Great job on the welding. Some are suggesting putting wheels on the table, but to me that sounds unsafe when you're using a welding torch. That could be a tragic episode if you did. Haha
Thank you for letting us see such an exciting project, most people buy a welding table but here it is built by themselves. Thanks for that. Greetings from Germany
Welding is no joke. When I was young, I worked for Brandon & Turnage Race Cars. Among other things, we balanced engines. When DOING this we had to use a TIG welder. Since the welds were, sometimes, close to bearing surfaces, it was important to be careful where to touch the welding wire. One HAS to use a super-dark welding hood. One time I had a very difficult place to weld in and started the welding wire, THEN flipped the hood down. Woke up in the middle of the night with my eyes on fire. Like hot ground glass was in them. I had flash-burned my eyes. The hospital said that I also had some damage to my retinas.
Great little welder, I love it, purdy bead also. I welded direct fit converters for 9 years, I worked in a very large muffler factory. Great looking table also.
T & A, I didn't know if I was going to enjoy this new channel of yours, but I love it! It is never boring and you always explain what you are doing. I am happy that you let Allie and Brandon in it too! I have to say, I can not lie, that your leg welds looked mighty good to me! You know what you are doing, but the "Armchair Quarterbacks" are going to feel like they need to put their two cents in too! ha The only negative is that the video went by so fast and I didn't want it to end! lol Love you guys!
Trent do you know why we all love you??? Well your humility ...and your honesty. Brandon is the icing on the cake.
You should have put some locking casters on your table so that you can move it around more easily. You probably would want to move it out to the center of the stall to use it.
Version 2.0
TRENTS NOT STUPID....IM SURE HE WILL MOVE IT WHERE HE NEEDS IT WHEN HE WORKS ON THAT TRUCK. U MUST NOT WATCH TRENT N ALLIE.....BECAUSE IF U DID...U WOULD KNOW THAT THEY BOTH ARE PRETTY SMART!!!!! JS
This is what I came to reply … And btw it doesn’t have anything to do with T & A being “stupid” It was just an observation … Those tables are very heavy … Table looks good and sturdy to me … Great job
Perfect time for reflection... Take a deep breath...everyone can use a litte advice and suggestions, the good thing about them both is you can take them or leave them, meaning not use them. And if I know Trent and Brandon, they more than likely have something better planned for the uses they will apply this table for but sure they appreciate all ideas...you never know when someones will be of help.
@@freekimsurr Hope you have a wonderful day. Rainy here and perfect reason to stay in jogging pants and watch football!! Dallas fan here, hubby a Carolina fan. Have an amazing day and week😀
Trent & Branden make an awesome team in all of the work that they do.
Art, not only is your comment very true, you are one of the few that spells Branden's name correctly. It's nice to see someone here paying attention. 😃
@@roberta4989 didn't realize this was a spelling class. I don't recall them teaching us how to spell Brandon's name?
@@51-FS Well Joa "Karen" Drike, please refer to my "paying attention" comment. Are you Joey or Joel or Job or Jimmy, Jim, Jasper, Jake or just plain Jerk? Or do you prefer Karen?
@roberta4989 I'm just s jerk. But at least I will admit it
Trent, you remind me of my brother-in-law. Jack of all trades. If he doesn’t know how, he figures it out with books or you tube. He became a pilot of a helicopter, bought an older 60’ish helicopter, used it to get his hours. Turned around an sold it. So it really only cost the gas and time. He then got a promotion at work (LE) became the top man that gave final tests throughout the state for others that flew for our department. He just has a mind like yours. Love your family and Brandon 😊👍
Good to see Brandon he hast to be part of Trent’s garage, It wouldn’t be complete without him.
Brandon is the best. You are blessed to have him as a friend.
Glad to see Brandon taking on some of the filming to give Allie a little more time back for editing a third weekly video! 👍🏼😎
I’m a 65 year old, old lady and I have really enjoyed your page so far😊
Me too!
Supporting Trent
Brandon you are a Knight of the Welding Table.
Cheers
86 year old lady, and love watching you, where did you learn all what you do BUILDGING YOUR HOME NOW A TRUCK.
Trent, you have a great friend in Brandon . to join you in all things you come up with.
What are friends For?
36k subs in two weeks that's awesome
My dad was a welding instructor. If he were with us today, he would say, “great job young man”.
I agree. I am no welder, but I have seen a lot of welding in these videos and this is excellent looking welding.
Your table looks beautiful.🙃🙂🤩🥰🤗😉😉😉😉😉😍
Thank you
Brandon the Man... I'm loving this content.
Like both channels very much
from South AFrica
Really enjoying this channel as well as Trent and Allie. Watching you and Brandon working together at Trent's Garage is great.
Great Brandon back. Love the three of you.
Good to see Brandon helping you out.
I know absolutely zero about most of the things that you do, but it's so much fun to learn how to build, wire, plumb, and weld by watching you. I had no idea how to purchase steel; I had no idea that there were shops that sold it. Thanks for showing us how to do so much.
I couldn’t comment earlier. I had a thought that you could add casters to the table to make it easier to move around as you use it. I love seeing Brandon behind the camera. Multi-talented guy!
Locking and unlocking casters each time you move a heavy duty work table is unreliable. I would much rather have it right where Trent has his: with a wall backing. Space to maneuver for clamping is easy enough because he can slide the table out a few feet without difficulty. Stability is an absolute on a heavy metal table that will be used for welding often times large, awkward objects.
Stacking dimes, Trent great welding. You guys make a great team.
So happy to see Brandon. You two , along with Allie, make the best team.
I'm so glad that you can do what you want for a living.
So with everything else you, now your are filming Trent’s garage. Allie you ROCK!!!!
I really enjoyed that! Can't wait for more fun!
Those are some decent looking welds!
Thanks
Tip: Add some tubing under the surface. If you put a heavy gearbox or other heavy part on it, it might sag and break your leg welds.
Add some 3” channel in an X under the table plate to keep it from warping
Nice job on the table! Always good to see Brandon...he is so amazing! (Jane)
So glad too see Brandon is helping with you on this channel.. I’m so happy for you I wish I could get my channel as many likes that you have.. I need too borrow Allie to show how too video my videos .
Think 🤔 U DONE A GOOD JOB OF THE TABLE TRENT, DONE A BIT OF WELDING MYSELF BACK IN THE DAY,
I really think your welding table, is a very good idea. Your welds look amazing.
I love the scenic shoots you intersperse throughout your videos. Love love love. It's insanely beautiful there.
Love that you were so safe during the welding!! And Brandon- great camera work! 👏🏻👏🏻👏🏻 table turned out awesome!
Hang a chain block some where if possible. Weld a powerhouse clip on steel and raise it off. 👍🏼
Smart advice, sounds like a man who does this stuff for a living.
Happy to see Brandon here . . I mean how could you not?! 🤔💁🏻♂️😄
I love everything you do and show. It is about you folks and what you do. Love all the different things that I get to see when Alli does the editing and music for each episode.
Nice welds!
Nice beads man! 👍🏼
Doing great. It’s good that you introduce Brandon to this video I have followed you from just before Covid all I can say is good one guys and you are never short o a surprise in store. Take care see you on the next one.
Casters are Definitely the way to go.
WOW nice clean welds! Very Nice indeed!
Thank you
Branden’s first ever appearance on Trent’s Garage. 🛻🛻🛻
By the way good luck with all the snow. I guess you could put a bucket on the front of your tractor and dig your house out. Allie is a real trooper shoveling all that snow.
You just made the best engine table I ever did see . Drop it on that baby. Je
Trent , Its great to see Alley filming,that means twice as many videos coming from you. Great table project, Iam waiting to see more, Hug Frank the dog for us.
Wow Trent! You can weld! Those beads look amazing!
Thank you 😊
Here we go again..Trent Garage. Sunday has a new collor..thanks for share Trent 🙌❤️
It would be nice at the end of your videos to say and I would really like to thank Brandon for getting up here in this treacherous weather to help me!! Just sayin. It going to be great watching you rebuild your rock crawler
You won't hear it
In my opinion, excellent job
Locking casters and a strong healthy vice are a must 👍
You're doing awesome Trent, please don't doubt yourself or take criticism to heart. Great job!! Yay love seeing Brandon helping he is doing wonderful job. You both deserve a big oat on the back...wooooo high 5!
Sending Loves and pat on back to you all!! ❤️ Be safe, from your fan in Vancouver BC ❤️💋🇨🇦
Oh wow! metal can be heavy for sure, and I think that you did a good job fabricating it. I think it needs some wheels or something to make it a lot easier to move around since it is so heavy. I am excited to see the truck get worked on. Thanks for a great video to watch have a great day, sending love and hugs, bye! 😂👋👍💜💜💜
That was a beautiful bead, now let’s see that “Frankenstein” one😂
There were some that got contaminated and didn’t looks so good haha
Every man needs a welding table especially if you like welding or if your working on your truck yourself it helps out a lot to have a welding table..
Let's see that big shop vise
Good job guys, Trent the welds look great. Keep the videos coming
Thank you
YAY! Great video, interesting table (needs casters) it is great to get to see this from the beginning with you and Brandon and Allie getting the shop setup. Keep the videos coming
I agree with the casters. You did a really good job of welding. Keep up the really good work
What an absolute joy to watch you and Brandon working together and what a magnificent job on the table Trent 🥰 I would add locking wheels to it
Al need a garage!!! I love the Golf room coming. But!!! Happy wife???? Hello??? 😂🤣😂🤣👍🏻👍🏻😎😎😎
Trent has unexpected mad welding skills. silky smooth joints brother
Nice job on your welding table, your beads look good, hey to family and friend.
casters are a good idea, especially in a small shop . the ability to roll the table outside to weld is important. now Trent is welding cutting and grinding against a wood wall.
Outstanding table awesome fun ❤😊
Welding work bench looks great Trent; the other consideration I have is maybe casters that lock, so you can use the bench, but roll it when you need to move it around in the garage. Pretty awesome job!!
Been with youse guys since you started building the house. Now as a car guy looking forward to this channel. "Flatheads forever"
Gramps
Wow! I criticize what you do as a home builder but your fab/welding is really skillful! I'll admit I'm jealous of your welder and your welding skills. Props to you.
Trent - Aside from what you've said, the fact that it sits flat, is great. As well, I built a worktable similar about 30 years ago, and I might wipe it down with an oily rag every 5 years, and still, no rust.
As well, a hint to the wise, take a grinder and round off those sharp corners on the top plate. Your hips, and Leo's head, will probably thank you for that.
OK...OK, welding table covered...just need that C&C Plasma cutting table, and your all set! :)
Awesome table for you are welding table.
Great work on the welding bench!
Trent, Great welds. Looking forward to this series. God Bless
No reason casters can't now be added.......
Nicely done Trent!!
Nice weld beads Trent ...for future reference ,worry more about the millscale than anything else . You can lay the best bead in the world but if you don't grind off the scale they will be weak ... On a side note ....please make your build videos longer 😊😊
😎🤘🏼 thanks man! The mill scale did contaminate some of the welds and I had to redo them haha
What’s millscale?
@@annelowry357 Mill scale is flaking on the surface of the metal after it is formed in the mill. "during welding, mill scale hinders the flow of the liquid weld pool, often causing an undesirable weld appearance or contour. Mill scale also can impede penetration into the base material and cause a lack of fusion and weld inclusions"
@@greyfyreshelties260 thank you.
I used to Farm and did tons of welding with a mig, I always grinded my welds clean before I layer down the weld , just works so much better.
You figure it out as you go along, practice makes perfect
Trent your welds are awesome good... you've had some practice at welding. Nicely done!
I don't know the answer to the quiz question, but my hubby does it within seconds... lol! He's a journeyman ironworker/rigger. He said the steel sheet weighs 528#'s and that steel weighs 44 #s per square foot. Then he broke down the math to me.... lol! He's so darn smart.... lol! So love this channel to Trent. 😍
You motivate me!
You are building stuff you may use for the rest of your life, great job!
I was not disappointed with the content of your video. As a matter of fact , I was glad to see that you are filming with your good friend Brandon. Good luck on the next one.
Very nice job on the table
Nice to see Brandon with you on this episode! Great job on the welding. Some are suggesting putting wheels on the table, but to me that sounds unsafe when you're using a welding torch. That could be a tragic episode if you did. Haha
Thank you for letting us see such an exciting project, most people buy a welding table but here it is built by themselves. Thanks for that.
Greetings from Germany
Boop... looks like fun times ahead!
I enjoy all the work you two do together!!! It’s always exciting.
Those are awesome welds! Nice and smoooooth!
I love the new show, Trent ♥️
Those are some damn fine welds, Trent.
Welding is no joke. When I was young, I worked for Brandon & Turnage Race Cars. Among other things, we balanced engines. When DOING this we had to use a TIG welder. Since the welds were, sometimes, close to bearing surfaces, it was important to be careful where to touch the welding wire. One HAS to use a super-dark welding hood. One time I had a very difficult place to weld in and started the welding wire, THEN flipped the hood down. Woke up in the middle of the night with my eyes on fire. Like hot ground glass was in them. I had flash-burned my eyes. The hospital said that I also had some damage to my retinas.
Great job, you’ve still got it!
Loved Trent and Brandon doing what looked like a very quick two, side shuffle. Looks like a job well done by an inexperienced subscriber.
Looks good, Trent.👍😊💕❤🙏.
It’s the Trent. !! 😎🤷♂️👍
Lmao 🤪
Great little welder, I love it, purdy bead also. I welded direct fit converters for 9 years, I worked in a very large muffler factory. Great looking table also.
Thank you
Great work. Glad to see Brandon helping you out. I am a car guy and will enjoy this build.
Awesome job Enjoying much love and blessings
Wow, Trent. Those are some nice welds!
T & A, I didn't know if I was going to enjoy this new channel of yours, but I love it! It is never boring and you always explain what you are doing. I am happy that you let Allie and Brandon in it too! I have to say, I can not lie, that your leg welds looked mighty good to me! You know what you are doing, but the "Armchair Quarterbacks" are going to feel like they need to put their two cents in too! ha The only negative is that the video went by so fast and I didn't want it to end! lol Love you guys!
The table looks great
TRENT YOUR PREVIOUS SNOW HAS FOUND ME HERE IN IOWA
Cool table nice build I do the majority of the welding a my work. Can’t wait to see what you have in store for us