Can Am X3 Powervision Flash & Gauge Setup
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- This video goes over how to flash your ECU with an AA custom tuned PV3. Most importantly this video shows how to set up your gauges and what the parameters actually mean. This allows you to properly monitor your X3 to make sure your AA tuned X3 is at peak performance.
Thanks for the info on what i should be looking for on my dynojet
💪😤 Good information!
BEFORE THAT PROCES , WHEN THE DEVICE SAVES MY STOCK FILE, I HAVE TO TAKE THE KEY OFF AND THEN PLUG IT AGAIN AND DO THE PROCEES OF THIS VIDEO?
Would a stage 2 AA tune be fine for a turbo rr with a rpm motor sports bov and a ggb race exhaust?
Absolutely, perfect fit! You could even do level 3 if you wanted since you have the exhaust.
@@aftermarketassassins5491 Do you guys think I would get some belt slip with a stage 3? Would it be completely safe for my machine to run? I normally use 93 pump gas or 91.
@@dont4getatowel You should be fine with level 3 on stock clutching as Can Am clutches these very heavy (low RPM) so the tune is able to be added without clutching.... but a clutch kit makes a big difference in ramping up acceleration faster. Thanks!
The video mentions an written article on this at your web site. I'd like to read this but cant for the life of me, find it. 2018 stage 2 clutch kit, level 2 tune. Thanks
Hey! I believe you are looking for this article? aftermarketassassins.com/tech-blog/f/rzr-xp-turbo-boost-overboost-low-boost-waste-gate-adjustments
@@aftermarketassassins5491 Yes, perfect! Thanks
What’s the Bluetooth for?
This is not used currently. We are hoping in the future we can connect via your phone.
I got 2020 turbo rr 195 horsie, looking at getting this to read engine codes/ check engine light etc, will this be the best option for me? And work for my vehicle?