Got mine a while ago actually got mine in 3 days best shipping and was during Christmas. Very easy to install and this blow off valve will surprise you so much great product defenitly a 10/10.
Not the easiest install on my 2021 turbo r because i have a rear bench and was trying not to remove it. However, I was able to do it without accessing it from behind the seat. Hardest part was getting the vertical tube on, but after I got it on, I was able to connect to the turbo from the passenger side and finish it up there. I wanted to run the filter but was concerned it was too close to the turbo. Turned it horizontal but the most clearance I was able to get was about 3/4”. Ended up pointing it down and no filter. Hoping it doesn’t cause any issues not having the filter on. Didn’t want to take the chance having the pre-filter catch fire…especially with my kids in the car.
Just put this BOV on my 2020 Turbo RR and spent 3 days loving it out in Ridgcrest over Thanksgiving. I'm just curious to why there is 2 springs in the box ? Couldn't see any differences and neither was labeled. Possibly just an extra, I don't know. Tried calling your tech support but no answer, possibly you guys are still out for the holiday. Well I'm stoked on the product, it sounds awesome, just trying to get some answers. Thanks
We recommend the softer spring ( the one that comes in it ). The Heavier spring will slightly change the tone is all. Under tips in the instructions we cover why we use the softer spring. Sorry we missed your call! 10-6pm is when we're in!
I am trying to install but I can't get my hands on any actual instructions for Can-Am X3 120HP BOV Kit. I can find it on your website, but the pdf won't open for me, can you please help
Filter goes on the end of the BOV, It acts as a muffler only, not used as a intake filter. Install always varies on mechanical ability. For what it's worth, we install these in under 10 minute at trade shows all the time.
The changes the springs make are really dependent on each machine. So the changes they make on one, would be different on the next guys, Especially with all the different boost level and power variations of the X3.
@@RPMPowersports well would you be able to tell me which one will be the loudest then? And I can just go through them myself,thankyou for the response!
As long as you’re not submerging past the intercooler. Otherwise we have a recirculation kit or you could snorkel the BOV. It can be under water, just not constantly
hi rpm, i just installed your bov sounds super loud and love it thanks, but i have one question, i installed my bov facing the filter to my cabin in a 2 o clock position upwards, i dont ride ever in deep water or near water i live in the dessert so do you think im good leaving it in that position? i would preffer to leave the filter in place, because of dusty conditions. thanks in advance
The "leaking" you're hearing is the vacuum. Bottom portion of the instructions. As far as rattling there isn't much for anything to rattle. Make sure the BOV is angled correctly and not hitting the turbo.
Guess I'm just getting old? BOV making noise doesn't give you any performance increase, I hear claims of better than the stock unit yet I havent actually heard anyone complain that their stock unit failed. To me this is like some kid putting a whistle in the tailpipe of a pickup truck trying to play like he has a turbo. Like I said... maybe I'm finally getting old and I dont get it anymore?
You probably haven’t heard of many stock unit failing because....... there isn’t a bov on the x3’s stock..... that’s the issue. As far as performance gains, better throttle response and prolonged turbo life. As far as noise, it’s personal preference, we offer a kit that provides all the gains and no noise as well.
RPM Powersports It not a difficult install but it’s not a 20 minute one on a 2020 RR. It takes that just to remove the rear rack in the back. Which needs to be removed to access the the rear intake tube from the inter cooler. I love the product, but it’s not a 20 minute install. I’m an ASE certified mechanic. Love your guys products.
@@ericmallow9650 Rear rack does not come off, behind the clutch intake tube you access the 54mm end of the tube with a flat head, and the other port on the turbo is through the access cover between the seats. Through the top with the bed off probably took much longer yes, but was unneeded and not part of the installation instructions.
RPM Powersports You can get to the the clamp fine but installing the new tube would be a pain. My hands are not that small to get in there to remove the old intake and install the new. Be happy to post pictures.
@@ericmallow9650 I consider myself to have pretty big clubs for hands, thats where we install them from, we do a few kits a week. Im sorry you had issues. Shoot us a DM on social media and well send you a shirt and koozies to you for the hassle!
it's likely while you're cruising that you hear it, under 100% throttle if it was releasing, it wouldn't have any boost to make power so wouldn't accelerate at all.
Boost operates it. its probably a lot nosier in the cab at full throttle. Its working, you just don't hear it from IN the car due to the exhaust and wind noise.
We include the filter but we don't run one and it's not needed. The billet "cap", I assume you mean plug, is included as a tool if you ever want to remove the BOV or test for boost leaks.
@@RPMPowersports that’s great! But I’m more of a seeing to learn then to read when it comes to things like this 😅 but hopefully I won’t have any problems installing it. Thanks
Hi I have a 22 on order so RR would work right And also can this be submerged without damaging anything ? I live in florida and that’s 90% of the riding around here
Would installing a BOV will cause turbo to overboost? Installed mine last week amd yesterday wen out to triails and i got. A check engine code PO234 any ideas what cukd of cause this
I mean how could it not be loud? You left the center cover off and its sitting right on top of the turbo, I'm sure that heat will be good for it right????
Yes, keep it downward, this doesn't mean straight up and down just at a downward angle. If you're hearing a delay after a high speed or long run it's because there is still pressure in the charge tubes, this is normal. if you do short blips of the throttle you'll notice no delay as its actually not at max boost. Boost itself is what opens and closes the BOV.
Thanks for the quick reply, I tried to point it in the downward position but the filter touches the turbo and the top of the motor not allowing it to be in fully vertical downward position, it's at a slight 45 degree angle towards the front of the x3. I'll try it with out the filter.
The 22 is the same as the 20’s…. Which is what was filmed in this video. We install them in less than 20 minutes, no tubes need removed but everyone’s technical level is different
@@mavica130 That literally makes no sense haha. A BOV has absolutely nothing whatsoever to do with the tune, no fueling, no timing, no boost, no nothing is increased altered or manipulated in any way with a BOV. you WILL have better throttle response though. A BOV will in no way increase the power whatsoever.
@@RPMPowersports i had the evo but it’s not working at all for me . They told me I needed a tune to hear it more . can you send me the exact link for a 2018 can am xrs turbo r ? and will you guaranteed me that it’ll sound like this?
@@hiimcanelo289 We have a lot of videos of these on stock machines! Here is what you need! rpmsxs.com/collections/can-am-bov-kits/products/can-am-x3-blow-off-valve-bov-kit-2017-2019
@@peterpann9619 You mean the non existent BOV from the factory? Every factory forced induction ever has a BOV from the factory except BRP's. Faster turbo re spool times, better throttle response, drastically longer turbo life, and increased reliability are all things that you must hate.
I've been running the RPM BOV kit on my 2020 X3 RC RR for almost a year now. Sounds great, and not a single issue with it so far. Great product!
The BOV and exhaust sound awesome! 🔥🤘🏻😎
Just Installed mine yesterday in my 19 X3. Loud AF and loving it! Thanks Rpm
Heck yeah man!
@@RPMPowersports
I just installed my bov sounds nice
But
I was hoping to get a rpm sticker with my order buy i didn't
@@marioeparral9934 shoot customer service an email and they'll send one!
I just ordered mine last night. Great video. I’m super excited. I should get it Thursday. Thank you
She's shipping out today!
Rpm thanks for the BOV for my 2018 x3 XRS, great product and easy install. Running the soft spring getting the high pitch turbo sound.
where do you put the spring?
Ordered mine last night! Hope it comes fast! Im pretty stoked about this mod.
Just ordered one for my 120! Thanks guys!
Mines is coming in a couple days can’t wait to put it on 🔥🤟🏽
Got mine a while ago actually got mine in 3 days best shipping and was during Christmas. Very easy to install and this blow off valve will surprise you so much great product defenitly a 10/10.
Not the easiest install on my 2021 turbo r because i have a rear bench and was trying not to remove it. However, I was able to do it without accessing it from behind the seat. Hardest part was getting the vertical tube on, but after I got it on, I was able to connect to the turbo from the passenger side and finish it up there. I wanted to run the filter but was concerned it was too close to the turbo. Turned it horizontal but the most clearance I was able to get was about 3/4”. Ended up pointing it down and no filter. Hoping it doesn’t cause any issues not having the filter on. Didn’t want to take the chance having the pre-filter catch fire…especially with my kids in the car.
Filter is not required!
Hahaa, you made it sound like you were shifting gears lol
I bought one from you guys and I installed it , it sounds pretty cool bt it came with 2 extra springs? Is there a diffrence in the springs???
They will change the tone of the BOV is all.
Just fell in love
Thats sweet
Just put this BOV on my 2020 Turbo RR and spent 3 days loving it out in Ridgcrest over Thanksgiving. I'm just curious to why there is 2 springs in the box ?
Couldn't see any differences and neither was labeled. Possibly just an extra, I don't know. Tried calling your tech support but no answer, possibly you guys are still out for the holiday. Well I'm stoked on the product, it sounds awesome, just trying to get some answers. Thanks
We recommend the softer spring ( the one that comes in it ). The Heavier spring will slightly change the tone is all. Under tips in the instructions we cover why we use the softer spring. Sorry we missed your call! 10-6pm is when we're in!
i live in ridgecrest lol
Is it ok to not have the blow off valve if you go in deep water. Some water holes get deep in Florida with rain. Just wanna make sure
Yes it can be submerged!
What exhaust. Sounds good
Just got mine today
sorry man but that is not Mex, / the blow off valve sounds nice.
I thought he said New Mexico
Yep, if that's Mexico, I'm buying property there ASAP- and yeah that POV is badass!
Can you put this on a brand new stock 2024 x3 without any type of tune?
Yes
I am trying to install but I can't get my hands on any actual instructions for Can-Am X3 120HP BOV Kit. I can find it on your website, but the pdf won't open for me, can you please help
I just got mine today
I’m ordering one now , but do you have a video on adding a boost gauge ? Any find anything on the web about it
You would just add a T fitting on the rubber reference line is all!
So where’s this filter go? As well at this isn’t no 20 minute job on the 19 ds models
Filter goes on the end of the BOV, It acts as a muffler only, not used as a intake filter. Install always varies on mechanical ability. For what it's worth, we install these in under 10 minute at trade shows all the time.
Hey rpm i was wondering if there was a video for how the different springs sound in the bov???
The changes the springs make are really dependent on each machine. So the changes they make on one, would be different on the next guys, Especially with all the different boost level and power variations of the X3.
@@RPMPowersports well would you be able to tell me which one will be the loudest then? And I can just go through them myself,thankyou for the response!
@@robertridenhour1779The softest would be the "loudest" and longest expel of air.
Are you running an exhaust on that RC as well? Sounds great
Yes, our muffler and mid-
pipe!
@@RPMPowersports Hi, will I need a tune with these three items? Bov, mid pipe and exhaust.
@@1ttcobra2003 if you do a mid pipe AND muffler then yes.
Is it manual or automatic gearbox
CVT
CVT
🤣
Jus ordered mine for my 2022 can am hopefully it sounds this good on it. Would a big mouth cat delete make it sound better also??
Yes, the big mouths help the muffler tone a ton!
Not a gear head but doing this myself. Stupid question maybe but where in tf does this spring and black cap go??
Black cap is only used when pressure wresting the charge system, extra spring is for changing the sound of the bov.
Do you guys have the kit for 2021 can am maverick x3 rr
All RR’s are the same so this kit will fit!
I purchased this kit from you.
Uk 2020 rc .
You sent 2 springs I have left the one in you sent fitted.
Is the extra spring stronger or less.
Stronger, but I recommend the spring that was in it when sent. It's personal preference really.
Is that spring more louder or less louder?
Which spring that comes in the box is more loud?
Is it water proof? We sometimes go in some deep stuff with the snorkels XMR.
As long as you’re not submerging past the intercooler. Otherwise we have a recirculation kit or you could snorkel the BOV. It can be under water, just not constantly
hi rpm, i just installed your bov sounds super loud and love it thanks, but i have one question, i installed my bov facing the filter to my cabin in a 2 o clock position upwards, i dont ride ever in deep water or near water i live in the dessert so do you think im good leaving it in that position?
i would preffer to leave the filter in place, because of dusty conditions. thanks in advance
You'll be okay!
@@RPMPowersports thanks
@@Coyote.five.0 No problem!
Why is there a delay from releasing the throttle to hearing the valve-purge.
Engine drag from the CVT. You may be letting off the gas, but the clutches are still engaged propelling the motor.
Can you run this with stock muffler/exhaust?
YES!
Are these louder than the Evo blow out valve ?
Best bet is to compare videos and decide for yourself on that one.
How much do you charge to install this?
How much is the post office to Budapest?
Hey man I installed mine only issue is there’s a rattling noise as well as there’s leaking from the bov
The "leaking" you're hearing is the vacuum. Bottom portion of the instructions. As far as rattling there isn't much for anything to rattle. Make sure the BOV is angled correctly and not hitting the turbo.
Do you guys sell one for a 2015 can am maverick 1000r turbo xds?
Guess I'm just getting old? BOV making noise doesn't give you any performance increase, I hear claims of better than the stock unit yet I havent actually heard anyone complain that their stock unit failed. To me this is like some kid putting a whistle in the tailpipe of a pickup truck trying to play like he has a turbo. Like I said... maybe I'm finally getting old and I dont get it anymore?
You probably haven’t heard of many stock unit failing because....... there isn’t a bov on the x3’s stock..... that’s the issue. As far as performance gains, better throttle response and prolonged turbo life. As far as noise, it’s personal preference, we offer a kit that provides all the gains and no noise as well.
I just installed mine but its not loud. I followed your video and website instructions and installed it correctly. What could it be?
Need to make sure you’re actually driving the car and not tying to test it in neutral. Shoot us a call and tech support will get you squared away!
This is not a 20 minute job on the 2020 X3 RR. It’s a pain in the ass.
Everyone's mechanical ability is different, this should have been a very easy quick install.
RPM Powersports It not a difficult install but it’s not a 20 minute one on a 2020 RR. It takes that just to remove the rear rack in the back. Which needs to be removed to access the the rear intake tube from the inter cooler. I love the product, but it’s not a 20 minute install. I’m an ASE certified mechanic. Love your guys products.
@@ericmallow9650 Rear rack does not come off, behind the clutch intake tube you access the 54mm end of the tube with a flat head, and the other port on the turbo is through the access cover between the seats. Through the top with the bed off probably took much longer yes, but was unneeded and not part of the installation instructions.
RPM Powersports You can get to the the clamp fine but installing the new tube would be a pain. My hands are not that small to get in there to remove the old intake and install the new. Be happy to post pictures.
@@ericmallow9650 I consider myself to have pretty big clubs for hands, thats where we install them from, we do a few kits a week. Im sorry you had issues. Shoot us a DM on social media and well send you a shirt and koozies to you for the hassle!
Is air leak normal through the bov? And also does it use a stiff spring?
Yes, we cover this in the instructions. rpmpowersportsomaha.com/instructions/X3_BOV_ver3.pdf
I just got mine u guys running the soft spring in the video?
@@reneulloa2437 We use the stiff spring ( the one we ship it with).
Will this affect my mass air flow sensor Since now there’s an exit for air that the mass air flow sensor is looking for??
I don’t have a tune on mine
I installed mine today and when I accelerate is when it releases why could that be? I also installed the filter that came with it
it's likely while you're cruising that you hear it, under 100% throttle if it was releasing, it wouldn't have any boost to make power so wouldn't
accelerate at all.
My blow off valve stopped working the first day I installed it , it made a exploding sound and stopped , any recommendations of what happened?
Sounds like a clamp was loose and it came off the intercooler or turbo.
So what's the springs In the box for?
To adjust the sound.
Hello, I have a question. I have a 2018 model. It is compatible because it appears on Amazon from 2020 to 2022.
We have a kit for each model
How can I order one for my 2020 can am x3
Ware are u guys located or ware can i order
Link to the products are in the description. We’re based out of Omaha Nebraska
Only sounds on light throttle and not when I do a full throttle. What could be happening?
Boost operates it. its probably a lot nosier in the cab at full throttle. Its working, you just don't hear it from IN the car due to the exhaust and wind noise.
He said they dont use filters, I just received the kit for an 20202 ds turbo rr came with a filter and cap I'm confused
We include the filter but we don't run one and it's not needed. The billet "cap", I assume you mean plug, is included as a tool if you ever want to remove the BOV or test for boost leaks.
How different are a 2020 turbo r bov and and 2019 turbo r bov? I might’ve confused and ordered a 2019 because I cannot install the Silicone tube?
The 2019 silicone tube are definitely different. they are 10mm shorter and 5mm skinnier.
What if you ride deep mud? Should you vent it higher?
As long as its mud and not pure water you'll be fine.
So it’s plug n play? Won’t need to get tuned?
No tune needed
Is this for the 2020 x3 turbo RR
Check out our store RPMSxS.com for an RR kit as well!
Is there an install video of this product? Also will it work on a 22 x3?
Detailed instructions with every purchase!
@@RPMPowersports that’s great! But I’m more of a seeing to learn then to read when it comes to things like this 😅 but hopefully I won’t have any problems installing it. Thanks
Hi I have a 22 on order so RR would work right
And also can this be submerged without damaging anything ? I live in florida and that’s 90% of the riding around here
Yes we have a kit for the 22’s! You’ll love it!
@@RPMPowersports can I submerge without adding the recirculating kit ? I want the whooshing sounds lol
@@danielsolano6931 Yes!
@@RPMPowersports buying today thanks 🙏🏼
does this fit my x3 max ds
As long as its not a base model, but we have a kit for base models also!
I see the bov is really close to the hot side of the turbo isthe bov plastic or billet?
Yes, all billet with Viton O-rings.
@@RPMPowersports tks i bought it but is hose suppoused to be a bit bent?
@@MiAvetteLs3 Make sure its all the way up the intercooler! IF it is give us a call and well help diag the issue.
Does blow off valve have to be hooked to the intake
There is a reference line between the BOV and plenum.
What exhaust are you running?
RPM SxS
Would installing a BOV will cause turbo to overboost?
Installed mine last week amd yesterday wen out to triails and i got. A check engine code PO234 any ideas what cukd of cause this
Usually caused by a boost leak, check the clamp at the BOV.
Also, check the map sensor located on the drivers side firewall. Has a few small hoses going to it. Commonly damaged during install.
Do you have a link for Amazon?
Faster delivery off our website.
Any idea if there is one for a 2021 can am x3 max??
Yes there is RPMSXS.COM
Will this fit a x3 xds cause on website it doesn’t say ?
We have 3 kits, one of them will fit it, it just depends what model / year X3 XDS you have.
RPM Powersports 2018 xds turbo r
@@oscarmendez6653 rpmsxs.com/collections/can-am-bov-kits/products/can-am-x3-blow-off-valve-bov-kit-2017-2019
RPM Powersports thank you for the great response ordering it rn !
I mean how could it not be loud? You left the center cover off and its sitting right on top of the turbo, I'm sure that heat will be good for it right????
TheDude, 1500 miles and no issues with our BOV. Even though they come with a 2 year warranty we have yet to warranty any components. Cheers mate.
The dude, check out our BOV Q&A video! We heated a BOV up to 750* with a torch and then ran it!
Is the filter supposed to be in the downward position I'm getting a delay on the sound/release
Yes, keep it downward, this doesn't mean straight up and down just at a downward angle. If you're hearing a delay after a high speed or long run it's because there is still pressure in the charge tubes, this is normal. if you do short blips of the throttle you'll notice no delay as its actually not at max boost. Boost itself is what opens and closes the BOV.
Thanks for the quick reply, I tried to point it in the downward position but the filter touches the turbo and the top of the motor not allowing it to be in fully vertical downward position, it's at a slight 45 degree angle towards the front of the x3. I'll try it with out the filter.
@@fredarceo3062 It doesnt need to be completely downward, the 4 or 8 o'clock ( like on a clock) angle is sufficient.
Its working in xr 2021 smart shocks?
Yes!
Which spring are you using for that one?
Soft
I'm up in Canada & I just ordered the kit for my 2022 XRC 72". Which spring should I use for more air sound & less high pitched sound?
@@colin_87 start with medium, then try the heavy
where can order one bud?
RPMSxS.com
Hey guys can I please get a link as well I just don’t want to order an incorrect one I have a Maverick X3 Max X RS Turbo RR
rpmsxs.com/collections/can-am-bov-kits/products/rpm-can-am-maverick-2020-x3-turbo-blow-off-valve-kit-bov-xrs-xrc-xmr-xds-rr
RPM Powersports i really appreciate the fast response!
20min my ass, on the 22 rr you have to move 2 more big pipes, an heat the hell out of it to come close!
The 22 is the same as the 20’s…. Which is what was filmed in this video. We install them in less than 20 minutes, no tubes need removed but everyone’s technical level is different
Sic
Is there any power gains? Just ordered mine!
Smoother and better throttle response and increased turbo longevity. Plus the cool sound! HP and TQ remain the same.
Layton White Actually without a tuner you will lose power. Don’t let these guy fool you
Evil DroneZ yikes
Too late
@@mavica130 That literally makes no sense haha. A BOV has absolutely nothing whatsoever to do with the tune, no fueling, no timing, no boost, no nothing is increased altered or manipulated in any way with a BOV. you WILL have better throttle response though. A BOV will in no way increase the power whatsoever.
Also to note, WITH a tuner you will also see no power gains from a BOV, its job isn't to increase power, its job is to prolong turbo life.
Does this fit the 2020 CAN AM XRS 1000RR?
Yes it does
All turboed x3 Can-am's are 900 c.c. 3 cylinder engines Not 1000 c.c. and polaris 1000 turbo rzrs are actually 925 c.c. engines
What are the springs that come with it there are 3 springs
Each will change the tone of the BOV. the top portion of the instructions covers it.
RPM Powersports ya put it on and love it.
@@dylanhamilton9393 Thanks for the awesome feedback!
Do you sell valvetronic exhaust or know any good place that does?
@@dylanhamilton9393 We sure do! we have a 2.5", 3", and 3" titanium one! rpmsxs.com/collections/can-am-exhaust
Since when did “Mexico” look that nice.🤔🤔
TylerDylan21 There’s actually lots of neighborhoods in Mexico that are much nicer than that.
There’s no for turbo RR :(
QTR 88 you have to call and specify that it’s for the RR.
If you give us a call or email we can get a RR tube sent !
Do you need a tune?
No tune is needed!
@@RPMPowersports i had the evo but it’s not working at all for me . They told me I needed a tune to hear it more . can you send me the exact link for a 2018 can am xrs turbo r ? and will you guaranteed me that it’ll sound like this?
@@hiimcanelo289 We have a lot of videos of these on stock machines! Here is what you need! rpmsxs.com/collections/can-am-bov-kits/products/can-am-x3-blow-off-valve-bov-kit-2017-2019
@@RPMPowersports do I need to get the Blow Off Valve Recirculation Kit as well?
@@hiimcanelo289 You do not need that.
What's the point of a bov, waste of money.
Waste of money how so? Or do you just not know the point of them is for more than just sound.
@@RPMPowersports Factory setup is perfect, like I said waste of money
@@peterpann9619 You mean the non existent BOV from the factory? Every factory forced induction ever has a BOV from the factory except BRP's. Faster turbo re spool times, better throttle response, drastically longer turbo life, and increased reliability are all things that you must hate.
@@RPMPowersports I stand corrected, do you have one that's not so loud?
@@peterpann9619 We have a recirculation kit. This recirculates the air back to the airbox, eliminating the noise.
Worst installation video ever
So like you can run it without the filter so will it be fine?
That’s correct!