after reviewing this and other videos, I realized all of them address the wrong cause. I purchased a new actuator and replaced the existing one, only to find the replacement was just as weak as the original. That’s when I realized that the real problem is the outside release handle which was too stiff for the actuator spring. Holding the handle in the “open” position and spraying WD 40 generously up into either side helped to clean out the gunk that was preventing the handle from easily moving, which is the real problem. No need to Jerry rig a spring if the door handle is lubricated properly.
You need to do the same process while the door is closed from the inside of your trunk. Open the back window before you start the process it will be a lot easier.
If your handle goes back into place every single time you let go then that is not your problem. search for; FJ Cruiser Door Lock Actuator Motor, it is a known problem and they should fix it.
after reviewing this and other videos, I realized all of them address the wrong cause. I purchased a new actuator and replaced the existing one, only to find the replacement was just as weak as the original. That’s when I realized that the real problem is the outside release handle which was too stiff for the actuator spring. Holding the handle in the “open” position and spraying WD 40 generously up into either side helped to clean out the gunk that was preventing the handle from easily moving, which is the real problem. No need to Jerry rig a spring if the door handle is lubricated properly.
@@Paul-1123- sadly you’ll see that cleaning it with WD-40 it’s only temporary and I’ll have to do it several times a year
do not use parts cleaner spray. ask me how I know.
Exact Problem I had....fixed in 10 minutes...Thanks for discovering this!!!
I'm truly happy I could help!
I was having the same problem. Thank you for the solution.
You're very welcome I'm so happy to help
Thank you! Just the information I needed!
I'm truly happy I could help
ya but how do you open it when it won't open?
You need to do the same process while the door is closed from the inside of your trunk. Open the back window before you start the process it will be a lot easier.
How did you get the top part off ?
sorry for the late response hopefully you were able to resolve your issue it just needs to open the back window and shimmy its way up
Get a nice spring from your hardware store, a piece of wire at both ends and attach to wherever you can. Will outlast the car.
you are correct but this is what was accessible to me
How can i fix it on a gx470 ?
yes you can the mechanism is exactly the same.
Worked for me thx!!!
What causes it
old plastic and friction
The door in my car is not locking by remote. Does this fix that problem?
If your handle goes back into place every single time you let go then that is not your problem. search for; FJ Cruiser Door Lock Actuator Motor, it is a known problem and they should fix it.
Spring would last longer
you are correct but this is what was accessible to me