@@Threefold.if you wrench in a corner if the muffler to make it inward, you can put blocks around it, this works with every multiblock that requires a muffler that has a hollow part inward, like the multismelter
You can press the "disable working" button on the input buses to stop them from pulling the cards out of the laser nodes. Just pull via the laserio node
LaserIO cards have a sneaky mode that allows you to access any side of the node's adjacent block which would allow you to put the node on a side that isn't directly above the ebf input hatches
This! If you can't stop the busses from pulling, put laserio to the side of its and use the sneaky mode set to up so it inserts as if it was above the bus.
Love the reference 45:40 about the " Redstone torch " from all the loot bags you opened in GTNH and getting redstone torches from. That made my day sir. Thank you for that ❤❤
@Threefold. of course your series on GregTech has help so many people and so many new community members of mine. I always recommend your videos on modpacks I host bc your videos are not only fun but very informative. It's the best keep up the good work, but try not to push yourself too hard again like that break you had a while back. We all love your videos so just make sure you go at your own pace
inside the EBF input bus, you can click the "Working Enabled" to disabled and it will not "pull" from the laserio nod. Either that or you can use wrench and rotate the input bus so it "pulls" from a different side. I've used the 2nd option to remove the visible blue/orange lines
Hey man, I found out about your channel like last week, I started playing along DJ2 with your series. I just wanted to say that I can really feel the passion you put on this channel and on what you do. Keep it up, man!
I've gotta say, the updates to your resource pack are a MASSIVE improvement over the first versions! The shading adds so much more depth and shape to the items, and the metallic items (motors, pumps, etc.) truly look metallic now! Also, adding animations was a very nice touch! I'd definitely encourage adding more of those where they'd seem to fit, it's extra work but it's worth it. Really brings the items to life. Keep up the good work!
Thanks for the feedback! I tried to take a lot of the comments on board to address many of the issues in the original version. Im happy that you think it's now improved :D
After watching you play a few different GT packs, I decided it was time to try it and jumped into the deep end with TFG and man, it takes so long to do anything but when you actually craft that one item or machine you've been working towards its such a rush! thank you for introducing me to GT and giving such great explanations of processes
12:49 - Three, you don't have to click on each drawer when adding it to the controller; you can click on corner drawers and it will add every drawer in between the two. In this case you could've only clicked on the sodium drawer (top left) and on the cobblestone drawer (bottom right) and have every drawer added to the controller. This also works in 3 dimensions.
I believe you should be able to shift + right-click the card holder in the air to toggle sucking up all LaserIO cards in your inventory, that way you don't have to manually insert every card
Usually i'm getting through packs much faster than other content creators upload however there's one exception. can't wait to see how you'll approach what's next for me instead of showing me how I could've done things in the past. happy greggin
the laser io item card bug is a known laser io bug that is fixed for newer versions but wont be fixed for 1.20. you should be able to disable the busses from auto withdrawing in the gui or with a mallet
I'm currently at ev stage. The ME requesters are a godsend for passiving without setting up dedicated machine setups. Just work on fast throughput with your machines and set up requesters and ME patterns to pull through the system. Pattern p2p are great for single machine paralellisation. Just remember blocking mode. The multi block versions of single machines are great but can be annoying at early levels due to fluid or circuit requirements spread over multiple buses. I found the Gregtech "buffer" helps split fluids to multiple buses from pattern provider. Eventually the Me fluid hatch for passive setups like ebf or 4/9 input hatches at later levels are amazing. Some multiblocks have strict casing requirements and you just can't add all the buses you need. I can't wait for the dual item fluid buses and parallel buses. When automating the Multiblock Chemical reactor I was stumped for a while. The need for different circuits hampers paralellisation. And if you don't want recipes cross reacting you need to use the pattern provider option "dont craft until main item returns". However these doesn't work with p2p pattern provider as returning item HAS to pass through pattern provider block to unlock, this makes p2p pattern paralellisation impossible. So you need to have one pattern provider with copies of patterns per circuit recipe in order to parallel craft. Hope this is useful info.
Threefold trying to resiste making more than 25+m episode, Status: Impossible. Glad to see you back on tho and as long as you're ahving fun I wont complain!
If I remember correctly, in GTNH at least, wiremill recipes for wires were faster the more X is per single wire. For example 16x wire is faster to craft then 2x. After you can just craft them manually into 2x.
I love your vid Three I'm so glad u came back and blessed us with another great series u also got me into greg tech and I'm playing star technology I love u Three keep up the goated work
For Laser IO, you can just connect all the nodes together in series or parallel. You dont need them to all go to a central node. I'm not sure what's causing the card to get pulled in though, that's a shame. It might get fixed if you submit a bug report though? TMGT looks amazing. Everything is very readable, and I really like how it evolved from the original showcase. Great job!
The button to the right of the reddstone button in the LaserIO GUI is for channels so you can have input and output in one node instead of two. you can daisy chain the laser nodes as well instead of connecting all of them to just one node. There should also be a way to change the color of the laser nodes iirc.
Did you know that you can rotate the multiblocks? Also, someone probably mentioned it already, but you don't have to use tools to access covers. You can go in the machine/controller GUI and go in the IO section and click on a desired side. You can choose the item output with left click and fluid output with right click. Click multiple times for auto output, or use the buttons. In the bottom left side of the GUI, there is a slot for covers. Do make sure to place the cover from the world and not the slot, as it has caused problems before. When a cover is placed, a cog button will appear for configuring the cover.
If you turn off the input buses, they won't suck the cards out of the node, even though they will face the node itself Edit: also, you can do the same channel separation for input and output with laserio, that way multiple nodes on an interface is pointless
im pretty sure you can put a filter into the greg tech input when you configure it by clicking the relevant side then there should be a box that looks like the filter just plop it in there and set the filter for the item card and then blacklist. every side has a separate filter slot i belive so you can have more filters on other sides later on.
Pretty sure EBFs can share energy hatches too (they could in Nomi). So you can put three MV energy hatches across two EBFs and share one energy hatch between the two EBFs and get HV out of both. Have not tested on Monifactory.
Honestly, just go with whatever length episodes you want, it's pretty obvious that if you limit the length the content will suffer (you probably won't be satisfied with the video as well) so just go ham
7:30 in the input bus interface, hit the power button, should turn off auto-input, but also, input buses aren't sided, so you could simply face them into the coils instead. edit: 27:30 and there it is
Hello Threefold! Awesome videos as always 😊. Now i have 4 suggestions for u. First of all, if u make the inputs of your ebfs face towards a differect side other than the laser nodes, they shouldnt pull it from inside the laser node. Secondly, u could propably get away with using 1 mv energy hatch per 2 ebfs since each one can handle 2 amps and the ebfs use only 1 amp. Moreover, u can use digital storage for your passive setups with interfaces and partitioned cells, which would reduce the use of storage busses and the lag later on(and use storage motitors, if this is how they are called, if u want to see the items u have in each setup). Last but not least, if u want to make some setups a bit cheaper, I suggest to use the push and pull upgrades for drawers, since they can do the same thing with conveyors (i think u used them a bit in the early episodes). Cant wait for the next video !!!
not sure if you know, but for all the storage drawer upgrades, the scaling on the increase is exponential. a copper upgrade is just wood and copper, and 4 copper upgrades alone allow you to store 8.4 million of a single item. i usually just throw 4 on any of my drawers instead of bothering with any of the higher tier upgrades like diamond.
I think someone already mentioned a solution. But you can also just aim the input bus away from the laser node, and laserio can still push/pull from the bus
i've been playing the pack and you probably will need the dynamos locally where the hnn machines, blast furnaces and hv machines are, the 8192 rf limit of the rf cable will limit you and getting to the endsteel cables requires the freezer
See, I would probably have beelined to improved circuit design. Specifically, the chemistry infrastructure to support the upgrades, Sulfuric Acid and Chlorine. With those two, you can get Sodium Persulfate (technically Iron III Chloride too) for the plastic boards since you already have polyethylene set up, You've got the MV engraver and a Diamond lens for CPU wafers, you've got the liquid polyethylene for SMD components, Chlorine plus your polyethylene will net you PVC for the capacitors, the only thing that might be difficult would be the Gallium in sufficient quantity for the Transistors. Once you do that, both your LV and MV circuit production becomes much more simplified and efficient with the Final Tier 1 and Tier 2 production!
Turn the input bus to the side. You can input from any side but only the side with the hole will auto pull. Pretty sure this works. -- EDIT: you got it 27 minutes in :) Should have waited to comment.
![[LIVE] : ONE ลุมพินี 83 วันนี้!! คู่เอก "พันฤทธิ์ vs ซุปเปอร์บอล วันของโอม MBK"](http://i.ytimg.com/vi/1b4pkKHa_Fk/mqdefault.jpg)
25 minutes double feature is crazy work
Yeah, just set speed to 2x!
What's better than 25 minutes of Threefold? 2x 25 minutes of Threefold!
how about the next one being a threefold 25 minutes that would be awesome
Ah, time to settle in for another cozy 25 minutes. :D
Nothing better to watch than a 50 minute video of Greg tech right now! Thanks so much Threefold!
My pleasure! Thanks for watching
@@Threefold.if you wrench in a corner if the muffler to make it inward, you can put blocks around it, this works with every multiblock that requires a muffler that has a hollow part inward, like the multismelter
I love the fact that we're getting the long episodes with a lot of actual content again! Thanks three!
You can press the "disable working" button on the input buses to stop them from pulling the cards out of the laser nodes. Just pull via the laserio node
I was thinking the same thing!
If him just turn the input bus hatch face to any other side should work too
plus it will save a tiny bit of TPS
This is the way (or redirect the hatch yeah)
you can also just point the input buses a different direction, that's what I've always done
I was playing alongside you, Three in Monifactory, but Factorio: Space Age released about 7 hours ago and.... yeah.... at least I can watch along!
Space Age already released? LESGOOOO
it has already taken 7 hours of my life what i havent even realized
That's alright. I'll be here when the factory has grown and the biters are extinct :D Thank you for watching
LaserIO cards have a sneaky mode that allows you to access any side of the node's adjacent block which would allow you to put the node on a side that isn't directly above the ebf input hatches
This! If you can't stop the busses from pulling, put laserio to the side of its and use the sneaky mode set to up so it inserts as if it was above the bus.
Great 25 minute Episode😊
Love the reference 45:40 about the " Redstone torch " from all the loot bags you opened in GTNH and getting redstone torches from. That made my day sir. Thank you for that ❤❤
I knew someone would remember hehe :D
@Threefold. of course your series on GregTech has help so many people and so many new community members of mine. I always recommend your videos on modpacks I host bc your videos are not only fun but very informative. It's the best keep up the good work, but try not to push yourself too hard again like that break you had a while back. We all love your videos so just make sure you go at your own pace
2x playback speed viewers rejoice: finally an ACTUAL 25 minute video 🎉
I hope you know you're helping a lot of people along with their own Moni runs, its greatly appreciated 👍
The texture pack is looking awesome three ^^ I can see you've studied lighting and shading and I have to congratulate you :)
Thank you so much
@@Threefold. no problem mr fold, I'm always pleased to see a good texture (or textures in this case :D)
inside the EBF input bus, you can click the "Working Enabled" to disabled and it will not "pull" from the laserio nod. Either that or you can use wrench and rotate the input bus so it "pulls" from a different side. I've used the 2nd option to remove the visible blue/orange lines
I love how you manage to edit the superfast placing of blocks to be perfectly in sync with the music. Well done
Babe not now, threefold just uploaded.
Hey man, I found out about your channel like last week, I started playing along DJ2 with your series. I just wanted to say that I can really feel the passion you put on this channel and on what you do. Keep it up, man!
shortest 25 min episode please make more of these
The new textures look SO good! It's easy to tell how much work you put into them, and I will definitely be using them
The dynamos don’t stop, when the power is full in the newest version, so be careful about draining all your diamonds.
I've gotta say, the updates to your resource pack are a MASSIVE improvement over the first versions! The shading adds so much more depth and shape to the items, and the metallic items (motors, pumps, etc.) truly look metallic now! Also, adding animations was a very nice touch! I'd definitely encourage adding more of those where they'd seem to fit, it's extra work but it's worth it. Really brings the items to life. Keep up the good work!
Thanks for the feedback! I tried to take a lot of the comments on board to address many of the issues in the original version. Im happy that you think it's now improved :D
I've been having a terrible week. Thank you for the light at the end of the tunnel you provide ❤️
If you hold the card holder and shift right click with it, it will turn on vacuum mode and scoop up all the cards in your inventory automatically.
Super proud of you dude!! Loved watching you the last year or so and absolutely loving your texture pack! ❤️❤️
wow the shading on those textures turned out really good! they look much better now!
the new textures look really cool, definitely a huge improvement!
I can't believe this video is just 25 minutes long it felt at least double that
Like, I love how your videos just pop up at the best times. ❤
After watching you play a few different GT packs, I decided it was time to try it and jumped into the deep end with TFG and man, it takes so long to do anything but when you actually craft that one item or machine you've been working towards its such a rush! thank you for introducing me to GT and giving such great explanations of processes
What a treat, a 50 minute two-(25 minute)part special episode ☺
Now THIS is the best "I'll try keep it under 25 minutes" video! I want to see 50 minute episodes for the rest of the series now haha
Thanks for the double feature Three!!
An hour long monifactory video... I NEEDED THISS
thank you so much i like the longer episodes :)
gotta love to get home from uni and just watch two threefold episodes (2x25)
I really like your textures! Clean and calm but with some nice little colorfull Animation 😮
12:49 - Three, you don't have to click on each drawer when adding it to the controller; you can click on corner drawers and it will add every drawer in between the two. In this case you could've only clicked on the sodium drawer (top left) and on the cobblestone drawer (bottom right) and have every drawer added to the controller.
This also works in 3 dimensions.
Long montage today! Quite satisfying seeing the machines start to build up :D
the shading makes your texxtures look soooo much better, now they actually look really good!
Thank you! I put a lot of work into their redesigns. Glad you like em ;)
I believe you should be able to shift + right-click the card holder in the air to toggle sucking up all LaserIO cards in your inventory, that way you don't have to manually insert every card
Usually i'm getting through packs much faster than other content creators upload however there's one exception. can't wait to see how you'll approach what's next for me instead of showing me how I could've done things in the past. happy greggin
Iron Furnace's with factory upgrade in them can recieve power from gregtech wires. They are much faster and use less power than gregtech furnaces
Love the long episodes! More 3 is better!
the laser io item card bug is a known laser io bug that is fixed for newer versions but wont be fixed for 1.20. you should be able to disable the busses from auto withdrawing in the gui or with a mallet
You can point mufflers downward into the ebf and it will work fine
I'm currently at ev stage. The ME requesters are a godsend for passiving without setting up dedicated machine setups. Just work on fast throughput with your machines and set up requesters and ME patterns to pull through the system.
Pattern p2p are great for single machine paralellisation. Just remember blocking mode.
The multi block versions of single machines are great but can be annoying at early levels due to fluid or circuit requirements spread over multiple buses. I found the Gregtech "buffer" helps split fluids to multiple buses from pattern provider. Eventually the Me fluid hatch for passive setups like ebf or 4/9 input hatches at later levels are amazing. Some multiblocks have strict casing requirements and you just can't add all the buses you need. I can't wait for the dual item fluid buses and parallel buses.
When automating the Multiblock Chemical reactor I was stumped for a while. The need for different circuits hampers paralellisation. And if you don't want recipes cross reacting you need to use the pattern provider option "dont craft until main item returns". However these doesn't work with p2p pattern provider as returning item HAS to pass through pattern provider block to unlock, this makes p2p pattern paralellisation impossible. So you need to have one pattern provider with copies of patterns per circuit recipe in order to parallel craft.
Hope this is useful info.
blessed with an hour of threefold
I always like how you sync the sounds in game to the music in your montages :)
50 minutes is a blessing
woah, a movie format Threefold vid!
The beginning of a good day when I get to sit down and watch the best foldon all of youtube
Threefold trying to resiste making more than 25+m episode, Status: Impossible.
Glad to see you back on tho and as long as you're ahving fun I wont complain!
Holy shit, your resource pack looks pretty! Kudos.
If I remember correctly, in GTNH at least, wiremill recipes for wires were faster the more X is per single wire. For example 16x wire is faster to craft then 2x. After you can just craft them manually into 2x.
Let's go another 25 minute video 🗣️🔥
I'm watching at 2x speed so Three is bang on schedule.
I was just getting bored, godsend, always good to see a new video
I love your vid Three I'm so glad u came back and blessed us with another great series u also got me into greg tech and I'm playing star technology I love u Three keep up the goated work
thx for the awesome music section!
LETS GO NEXT 25 MINUTE EPISODE
Yes, we love these 25min episodes
Three check out extended interfaces as they are cheap and provide you with 4x the slots of regular interface
Nice another perfect 25 mins i love it.
50minutes episode. Holy.. I mean I'm not complaining :)
redstone on - machine on, baby!
Passive all the things with threefold!
For Laser IO, you can just connect all the nodes together in series or parallel. You dont need them to all go to a central node. I'm not sure what's causing the card to get pulled in though, that's a shame. It might get fixed if you submit a bug report though?
TMGT looks amazing. Everything is very readable, and I really like how it evolved from the original showcase. Great job!
I like the long episodes, myself :)
The button to the right of the reddstone button in the LaserIO GUI is for channels so you can have input and output in one node instead of two. you can daisy chain the laser nodes as well instead of connecting all of them to just one node. There should also be a way to change the color of the laser nodes iirc.
Did you know that you can rotate the multiblocks?
Also, someone probably mentioned it already, but you don't have to use tools to access covers. You can go in the machine/controller GUI and go in the IO section and click on a desired side. You can choose the item output with left click and fluid output with right click. Click multiple times for auto output, or use the buttons. In the bottom left side of the GUI, there is a slot for covers. Do make sure to place the cover from the world and not the slot, as it has caused problems before. When a cover is placed, a cog button will appear for configuring the cover.
Hi three!
You can lock all of the drawers in a controller's network by locking the controller instead of the individual drawers!
Love the longer Episodes ❤
For the laser IO cards getting sucked into GT buses: If you disable working in the bus GUI it wont do that anymore.
New Threefold vid, this must be good
if you want the laser IO node to work with the EBF you just need to disable the bus. It will still work as a bus but it wont auto pull the items.
Oh Ender IO!!! When will item conduits return from the war!! Item conduits my beloved
Love the longer videos.
If you turn off the input buses, they won't suck the cards out of the node, even though they will face the node itself
Edit: also, you can do the same channel separation for input and output with laserio, that way multiple nodes on an interface is pointless
im pretty sure you can put a filter into the greg tech input when you configure it by clicking the relevant side then there should be a box that looks like the filter just plop it in there and set the filter for the item card and then blacklist. every side has a separate filter slot i belive so you can have more filters on other sides later on.
Yo 57s ago? Dang. So excited to spend most of the next hour watching!
Be sure to check out energy P2P and pattern P2P, it's an absolute lifesaver.
I love these longer videos!
Pretty sure EBFs can share energy hatches too (they could in Nomi). So you can put three MV energy hatches across two EBFs and share one energy hatch between the two EBFs and get HV out of both. Have not tested on Monifactory.
Honestly, just go with whatever length episodes you want, it's pretty obvious that if you limit the length the content will suffer (you probably won't be satisfied with the video as well) so just go ham
7:30 in the input bus interface, hit the power button, should turn off auto-input, but also, input buses aren't sided, so you could simply face them into the coils instead.
edit: 27:30 and there it is
Hello Threefold! Awesome videos as always 😊. Now i have 4 suggestions for u. First of all, if u make the inputs of your ebfs face towards a differect side other than the laser nodes, they shouldnt pull it from inside the laser node. Secondly, u could propably get away with using 1 mv energy hatch per 2 ebfs since each one can handle 2 amps and the ebfs use only 1 amp. Moreover, u can use digital storage for your passive setups with interfaces and partitioned cells, which would reduce the use of storage busses and the lag later on(and use storage motitors, if this is how they are called, if u want to see the items u have in each setup). Last but not least, if u want to make some setups a bit cheaper, I suggest to use the push and pull upgrades for drawers, since they can do the same thing with conveyors (i think u used them a bit in the early episodes). Cant wait for the next video !!!
Three you can use the soft mallet to disable the auto input on input busses (or the power button in the ui)
not sure if you know, but for all the storage drawer upgrades, the scaling on the increase is exponential. a copper upgrade is just wood and copper, and 4 copper upgrades alone allow you to store 8.4 million of a single item. i usually just throw 4 on any of my drawers instead of bothering with any of the higher tier upgrades like diamond.
7:20 make the input buses face another side, even inside the ebf, that way you can still send items in but they wont auto input
I think someone already mentioned a solution. But you can also just aim the input bus away from the laser node, and laserio can still push/pull from the bus
I Love the short videos.
@threefold if you face the muffle hatch on the inside of the ebf it won’t be obstructed and you can place anything above it afterwards
It's time to consume 1h of threefold doing a bit of Greging
i've been playing the pack and you probably will need the dynamos locally where the hnn machines, blast furnaces and hv machines are, the 8192 rf limit of the rf cable will limit you and getting to the endsteel cables requires the freezer
See, I would probably have beelined to improved circuit design. Specifically, the chemistry infrastructure to support the upgrades, Sulfuric Acid and Chlorine. With those two, you can get Sodium Persulfate (technically Iron III Chloride too) for the plastic boards since you already have polyethylene set up, You've got the MV engraver and a Diamond lens for CPU wafers, you've got the liquid polyethylene for SMD components, Chlorine plus your polyethylene will net you PVC for the capacitors, the only thing that might be difficult would be the Gallium in sufficient quantity for the Transistors. Once you do that, both your LV and MV circuit production becomes much more simplified and efficient with the Final Tier 1 and Tier 2 production!
Tried this in Nomi, now I have 100k total dust items in my AE2 drives. It was fun weekend cleaning it up.
How do you always get your bases looking so awesome while still keeping them functional? Im slightly jealous😅
Turn the input bus to the side. You can input from any side but only the side with the hole will auto pull. Pretty sure this works. -- EDIT: you got it 27 minutes in :) Should have waited to comment.
Nice a long ep 👍
Another banging episode 😀