Bought one for a Street Glide that I had for a minute. It worked great. Got one for the Low Rider ST. I'm 5'11" and it is an inch or two too short for me. The wind would hit me in the face, but if I ducked down a bit, it was fine. klockwerks says they have heard the concerns and they are testing a taller version.
You're the second person that has mentioned that. So far I'm impressed with the windshield but I wouldn't have any problem going back to the stock one too. Thank you very much!
I have tried the Harley 10", Klockwerkes 6" and 10" as well as clear view Shields XL and I found that all of them were worse than the stock 6". I spent a tom of cash and still stayed with the stock@@jeremythomas7278
I'm 6' and installed the 8'' Klock Werks on my 2023 Low Rider ST. I really see a big difference with almost no wind in my face even at 75 mph. Great Product
Thank god someone finally has a review on the 8inch! I've been debating on buying one for a month but no reviews. I actually talked to klockwerks back in April about making an 8 inch and they said until they get more messages about it they weren't going to so I had the guys on the ST page email bomb them and then they actually made it. But the bronze sold out right away and that's the one I want. Good to know it works good and the buffeting is gone. The 10" is just too tall looking for my taste.
I am 5'8" and running the 10 inch screen from Harley. Still getting buffeting in turns. Wondering if it's because of it being more narrow. Torn between the 6" and 8". Any thoughts?
Love my Klock werks on my SG and it definitely helped on her Sport Glide but the Sport Glide doesn't come with much of a screen to start with. Thanks for the Review!
I have the same windshield I am 5’10 it definitely works better than the stock windshield. My only complaint is there is a slight whistling noise off windshield. With helmet and music you don’t hear it.
I want to save everyone money and advise you to not to buy the 6" Klock Werks. I put one on my 2022 Low Rider ST today and it is not even close to being better than the stock screen. Although the stock screen allows wind to hit your upper chest and helmet, at least is constant "clean air." Because the Klock Werks has a dramatic FLARE at the top of the screen (meant to shoot air over you) is disrupts the air and causes "dirty turbulent air." You do notice less air hitting you, but the air that hits you is "buffeting" air. I wear a Simpson full face helmet. After my ride today at streets and highway speeds, when I got home I immediately put the stock screen back on. I would not say I wasted my money by purchasing the Klock Werks, because it taught me that the stock screen is much better and to appreciated the bike's awesome wind managment. Maybe when Klock Werks comes out with a taller screen it will be better... but for now save your money... I warned you.
Thank you and I appreciate your feedback very much. So far, I like the windshield "ok", but I can't really tell that much of a difference between the Klock Werks and stock. Thank you very much for watching! I appreciate your time today!
I had the same experience with both the Medium and Large Clearview windshields, I'm 5'9". Both caused head buffeting that I didn't get from stock. Still looking for something that I can ride with that gives more rain protection. I may try the KW 8" but waiting for more reviews on it.
@@militaryminedid2011 I installed the KW 8" (I'm 5'8") a week ago. It is excellent up to 65 mph, as soon as you pass 65 mph it is hell; very strong head buffeting. I replaced it with OEM 10" but I did not have the chance to test it yet
Thanks. I appreciate others reviews on this topic, saving me money in trying. Please post how the 10" goes for you and if you can see over the thing at your height. @@stefanopanella71
So I have had a different experience then you with the oem windscreen. Although it looked great on the bike, I would get wind buffeting much more then your describing. Im also 6ft tall so I know that makes a big difference. I didnt go with the klock werks one because it looks like it wouldnt be any better then stock (which you have confirmed in this video) So I decided to go with the light smoke Harley screen, and I can tell you its night and day difference with wind buffeting, I absolutely love it. Only downside is its not tinted as dark as this one and oem one but thats ok, I suppose you could have someone put a darker tint on it. I wont be doing that because its tall enough that I feel like a darker tint would obstruct my view, but the harley 10 inch light smoke functions much better.
Excellent information. Thank you very much. I'm probably going to order the tall windshield so that I can experience what you're talking about. Thank you very much for the feedback!
It looks good but, if you want better wind protection get the tall Harley-Davidson one. It makes the wind go over your head, no more strong wind in the face. I have to use the old cliche "Try it, you'll like it"
I find with the stock windshield I'm getting lots of wind in my face , is it the same with the Klockwerks ,The Klockwerks on my Street glide seems to direct the wind over my head a bit more
To be honest with you I can't tell much of a difference between the stock windshield and the Klock Werks on my LRST. The fairing seems to be what makes all the difference to me. Thank you very much for watching!
Hello Ty I’m getting buffeting at highway speeds stock and the 10” tall HD screen. Even with my full face helmet and visor down! I think I need a 10” that is wider than the HD TALL screen. I’m 5’ 10” and ride with a sundowner seat. I hope someone brings out a screen that removes helmet buffering at highway speeds. If you know of one please let me know? Great Chanel ride safe
Hey Alan. Sorry to hear about that man. So far my experience has been an A+! Yeah maybe a different windshield from other manufacturers would do the trick. I have the KlockWerks on mine. Not much difference in functionality than the stock but it looks great. If you figure this out please let me know your solution! Have a great day sir.
Thanks for taking the time to reply Ty. When I get a screen that dialled in for me I’ll let you know. I’ve just fitted cobra NH slip ons. Here in the uk we have O2 sensors in the OEM slip ons this is due to emissions laws. My ST is booked in to the dealer for a fuel map and O2 delete. I’m looking forward to the spring. Currently waiting on forward controls ! Keep safe
I was just researching this product and low and behold, you did a video on it! So it's been a few months since you installed it. Besides the looks, are you satisfied with it? Also, did you go with the 6" or 10".
I went with the 6". So far I can't really tell that much of a difference from stock. It looks really good on the bike which is why I am going to keep it. Let me know what you think if you get one. Thanks for watching!
Hi Ty how tall are you. I’m 5.7 and was hoping the 6 will work. I think the 10 would be to tall. I really like the looks but don’t want the Sind in my face along with the rain. Thanks
I'm with you on the buffeting. I never really experience any of it while on this bike. I'm torn between this windshield and the Harley 10". I just don't want to waste money on a look. If I heard right you don't feel a difference? I see that LP4! Bike looks nice man.
Yeah man. So far I can't tell any difference at all. I do think I want to try out that tall windshield just to see how it handles. So far the LP4 has been a good choice. It's sooooo bright! Thanks man. I hope you have a great day!
0.50 you'd start a fight at our house going that slow, lmao. i'm a KW fan. i run the 15" Pro Tour on the road glide, really happy with it and looks good. I'm looking forward to getting a slicer fender from KW
I busted up my first Pinlock shield trying to get it into the helmet. I need to just buy another. hahaha. Thanks for the reminder Kerry! Have a great day!
⚡ Please SUBSCRIBE here --> th-cam.com/channels/dPcJDOGSV2CEIREo_7LOvg.html ⚡
Bought one for a Street Glide that I had for a minute. It worked great. Got one for the Low Rider ST. I'm 5'11" and it is an inch or two too short for me. The wind would hit me in the face, but if I ducked down a bit, it was fine. klockwerks says they have heard the concerns and they are testing a taller version.
You're the second person that has mentioned that. So far I'm impressed with the windshield but I wouldn't have any problem going back to the stock one too. Thank you very much!
im the same height and have the same issue. wind hits me in the forehead.
What size was it I'm thinking the 8 inch for my Low rider ST
At that time it was the only size they had.@@bamm898
When I put it on my low rider st it actually made it buffet at speeds above 55. I’m 5’9” with a 30” inseam. I was surprised
Thanks Jason! I appreciate the feedback. If I notice that too I will put the stock windshield back on. Is that what you did?
@@TyFromTennessee yes I did. I actually also tried the Harley 10” and found the stock one was best
@@jasonsawyers6852 Thanks man. Great information there.
Was this the 6" flare you tried and went back to stock? Having same issues with my 10 inch harley screen.
I have tried the Harley 10", Klockwerkes 6" and 10" as well as clear view Shields XL and I found that all of them were worse than the stock 6". I spent a tom of cash and still stayed with the stock@@jeremythomas7278
I'm 6' and installed the 8'' Klock Werks on my 2023 Low Rider ST. I really see a big difference with almost no wind in my face even at 75 mph. Great Product
That's fantastic man. Glad it is working out for you and thank you for watching!
Thank god someone finally has a review on the 8inch! I've been debating on buying one for a month but no reviews. I actually talked to klockwerks back in April about making an 8 inch and they said until they get more messages about it they weren't going to so I had the guys on the ST page email bomb them and then they actually made it. But the bronze sold out right away and that's the one I want. Good to know it works good and the buffeting is gone. The 10" is just too tall looking for my taste.
I am 5'8" and running the 10 inch screen from Harley. Still getting buffeting in turns. Wondering if it's because of it being more narrow.
Torn between the 6" and 8". Any thoughts?
I don't get pushed around at all with the wind. So far, it's been a great experience.
@@TyFromTennessee you have the 6"?
@@jeremythomas7278 Yes sir. I sure do.
Love my Klock werks on my SG and it definitely helped on her Sport Glide but the Sport Glide doesn't come with much of a screen to start with. Thanks for the Review!
Thanks Mike! I appreciate your time very much sir!
I have the same windshield I am 5’10 it definitely works better than the stock windshield. My only complaint is there is a slight whistling noise off windshield. With helmet and music you don’t hear it.
I appreciate your feedback. I'm going to keep this windshield on the bike for sure. It works great and looks cool. Thank you for watching!
i notice the whistling too around 20 miles per hour plus the buffering after 50 miles, lot of problem for 300 bucks shield, send it back...
Im 6'2" so I am waiting patiently for a 10" from Klockwerks
I've been reading lots of comments that you taller guys are having some issues with the wind. Hope you get it soon! Take care Kevin!
Did youvwnd up getting the new 10 inch klock works? If so.. how do you like it? Thank you
I want to save everyone money and advise you to not to buy the 6" Klock Werks. I put one on my 2022 Low Rider ST today and it is not even close to being better than the stock screen. Although the stock screen allows wind to hit your upper chest and helmet, at least is constant "clean air." Because the Klock Werks has a dramatic FLARE at the top of the screen (meant to shoot air over you) is disrupts the air and causes "dirty turbulent air." You do notice less air hitting you, but the air that hits you is "buffeting" air. I wear a Simpson full face helmet. After my ride today at streets and highway speeds, when I got home I immediately put the stock screen back on. I would not say I wasted my money by purchasing the Klock Werks, because it taught me that the stock screen is much better and to appreciated the bike's awesome wind managment. Maybe when Klock Werks comes out with a taller screen it will be better... but for now save your money... I warned you.
Thank you and I appreciate your feedback very much. So far, I like the windshield "ok", but I can't really tell that much of a difference between the Klock Werks and stock. Thank you very much for watching! I appreciate your time today!
Thanks for the info man! I’ll save my $250 for some other mods on my ST!
I had the same experience with both the Medium and Large Clearview windshields, I'm 5'9". Both caused head buffeting that I didn't get from stock. Still looking for something that I can ride with that gives more rain protection. I may try the KW 8" but waiting for more reviews on it.
@@militaryminedid2011 I installed the KW 8" (I'm 5'8") a week ago. It is excellent up to 65 mph, as soon as you pass 65 mph it is hell; very strong head buffeting. I replaced it with OEM 10" but I did not have the chance to test it yet
Thanks. I appreciate others reviews on this topic, saving me money in trying. Please post how the 10" goes for you and if you can see over the thing at your height. @@stefanopanella71
So I have had a different experience then you with the oem windscreen. Although it looked great on the bike, I would get wind buffeting much more then your describing. Im also 6ft tall so I know that makes a big difference. I didnt go with the klock werks one because it looks like it wouldnt be any better then stock (which you have confirmed in this video) So I decided to go with the light smoke Harley screen, and I can tell you its night and day difference with wind buffeting, I absolutely love it. Only downside is its not tinted as dark as this one and oem one but thats ok, I suppose you could have someone put a darker tint on it. I wont be doing that because its tall enough that I feel like a darker tint would obstruct my view, but the harley 10 inch light smoke functions much better.
Excellent information. Thank you very much. I'm probably going to order the tall windshield so that I can experience what you're talking about. Thank you very much for the feedback!
It looks good but, if you want better wind protection get the tall Harley-Davidson one. It makes the wind go over your head, no more strong wind in the face.
I have to use the old cliche "Try it, you'll like it"
Not a bad idea at all. I think I just might give it a shot. Thank you for the suggestion. Have a great day!
I went with the 10 inch windshield from HD and really like it. I prefer it because I like the clear. I am 5’7”. No buffeting.
I do like mine on my Goldwing. They are making one for the Pan America. They told me they are having some issues due to the PA unique mount.
They really make some great products. Functional for this bike...ehhh...maybe, BUT it looks cool. Thanks for watching Pete!!
I find with the stock windshield I'm getting lots of wind in my face , is it the same with the Klockwerks ,The Klockwerks on my Street glide seems to direct the wind over my head a bit more
To be honest with you I can't tell much of a difference between the stock windshield and the Klock Werks on my LRST. The fairing seems to be what makes all the difference to me. Thank you very much for watching!
Hello Ty I’m getting buffeting at highway speeds stock and the 10” tall HD screen. Even with my full face helmet and visor down! I think I need a 10” that is wider than the HD TALL screen. I’m 5’ 10” and ride with a sundowner seat. I hope someone brings out a screen that removes helmet buffering at highway speeds. If you know of one please let me know? Great Chanel ride safe
Hey Alan. Sorry to hear about that man. So far my experience has been an A+! Yeah maybe a different windshield from other manufacturers would do the trick. I have the KlockWerks on mine. Not much difference in functionality than the stock but it looks great. If you figure this out please let me know your solution! Have a great day sir.
Thanks for taking the time to reply Ty. When I get a screen that dialled in for me I’ll let you know. I’ve just fitted cobra NH slip ons. Here in the uk we have O2 sensors in the OEM slip ons this is due to emissions laws. My ST is booked in to the dealer for a fuel map and O2 delete. I’m looking forward to the spring. Currently waiting on forward controls ! Keep safe
As a tall rider i love my Klock Werks screen on my Street Glide
I've got one on my SG too and it's been a great investment. Thanks for watching!
What size did you get? Their 6” seems to be closest to the stock windshield
Hey Mark! Yes sir. That’s the one I went with. Works great with the bike. Thank you for watching!
KW Shields look the best no doubt , but freedom shields blows them out of the water for function and construction
Hey Rich! I've had a few Freedom Shields in the past. Great product from those guys too. Thanks for watching!
I was just researching this product and low and behold, you did a video on it! So it's been a few months since you installed it. Besides the looks, are you satisfied with it? Also, did you go with the 6" or 10".
I went with the 6". So far I can't really tell that much of a difference from stock. It looks really good on the bike which is why I am going to keep it. Let me know what you think if you get one. Thanks for watching!
@@TyFromTennessee you indicated that in the video. Wasn’t sure of the long term review. Thanks for the insight.
Hi Ty how tall are you. I’m 5.7 and was hoping the 6 will work. I think the 10 would be to tall. I really like the looks but don’t want the Sind in my face along with the rain. Thanks
Hey there. I am 5'9 and the Low Rider ST fits me perfectly. Thank you very much for watching!
Some times it's just about the looks, I think it looks good and it didn't make it worse so it was a good buy!
No doubt. Maybe I'll have a different opinion once I'm able to take some long trips but for now it's a keeper! Thanks for watching!!
I'm with you on the buffeting. I never really experience any of it while on this bike. I'm torn between this windshield and the Harley 10". I just don't want to waste money on a look. If I heard right you don't feel a difference? I see that LP4! Bike looks nice man.
Yeah man. So far I can't tell any difference at all. I do think I want to try out that tall windshield just to see how it handles. So far the LP4 has been a good choice. It's sooooo bright! Thanks man. I hope you have a great day!
@@TyFromTennessee Thanks for that insight. You can never go wrong with a Baja Designs man! Ride safe out there man!
Would of like to see you at highway speeds to see if any difference.
Even at highway speeds I just don’t notice much of a difference at all. Thanks for watching!
@@TyFromTennessee got ya. Thanks.
0.50 you'd start a fight at our house going that slow, lmao.
i'm a KW fan. i run the 15" Pro Tour on the road glide, really happy with it and looks good.
I'm looking forward to getting a slicer fender from KW
had wondered about that and now I know. Thanks Ty.
You bet Jim. Hope I was able to help. Have a great day sir...
What size windshield was that one
I would have to look but I think it’s the 6 or the 6.5. Thank you for watching!
I see you have a thrashin bag . Did you end up going with the bigger bag? Also how do you like it?
Love it man. It's perfect for the Low Rider ST. Thanks so much for your comment. I appreciate your support for the channel!
Did you get the bigger bag or smaller bag?
@@hd2323 Here is the one I purchased. I hope this is helpful. Handlebar Bag Plus - bityl.co/F6Yt
Thank you Ty
Love it. Thank you for sharing
Thanks Ray! I appreciate your time today!
what size is it.
I think it’s the 8 or 8.5. Thank you very much for watching!!
They need to make an 8” and a 10” 10is almost too much as far as looks go.. 8 “ is probably right
That looks awesome Ty!
Thanks man. I appreciate that very much!
I'm 6ft, 8 inch is perfect... Reduced wind by alot compared to stock. Bitch to install as the holes do not line up perfect.
Yes sir. So far, it's working out perfect for me. Thank you for watching!
I think that fairing looks good!
Thanks Salty! I appreciate your comment very much!
Check out my review on the klock werks 10
Yeah man. So far I’m very pleased with the product. Thank you very much for watching!
Looks good to me. 😎👍
I appreciate that very much Darren!
Pinlock your face shield and you won't have any more fog.
Ride safe.
I busted up my first Pinlock shield trying to get it into the helmet. I need to just buy another. hahaha. Thanks for the reminder Kerry! Have a great day!
For me, the curved lip messes up the lines of the bike. And you know we are all about 'looks".
I can understand that. I appreciate your feedback. Thanks man!