@@kacperviechorek279 man when i got my crf250r the bike i was talking about was supposed to be a complet rebuild but the clutch was fucked and the head was fucked so i just got a down payment on a new one and its the best way to go man you'll know the full history of the bike and wont habe to worry about some scum that wats a pay day
i noticed that too - they must be expecting to be low balled. I see the asking price, consider them crazy and move on down the list... I wont call if they are asking too much.... I will ALWAYS call if those three little letters OBO are displayed
This is why I'm glad the person I first bought a bike from was such a great guy. Very polite on the phone, answered all my questions, got the price lowered on the phone and he agreed to hold it for two days. I showed up to a bike in great condition and he did all the regular maintenance just before selling it, including an oil and spark plug change before he handed over to me. Too bad he sold it to me, I've been comparatively brutal to the machine! XD Luckily I plan to ride it until it dies. But if I ever have to sell a bike in the future, I'll make sure to pass on what he did for me and give the next guy the same amount of respect.
If only everyone was as decent as that mate half the time some1 selling there most prized possesion there hobbie cause it no longer running yet they say runs rides with no problems if only
This bike has a little fuel left in the tank. That being said it maybe time for a top end rebuild or valve check. Keep that in mind before purchasing a used bike with a little fuel left in the tank.
Metal Mulisha stickers or graphics kits are an instant red flag. If I see a paddle tire that's an instant no. Stickers all over is a no. Bikes stored outside are a no.
Also even in states like Oregon where a title isn't required, do not buy without a title. People like to sell them without the title and then report them as stolen and get their bike back and keep your money
Trying to sell without a bill of sale is a bigger red flag than any of the ones that you mentioned. That doesn't even make sense. Why would anyone deny a bill of sale?
@@92suzukigsx1100g The really knowledgeable guys over there probably wanted to make this video and this guy is probably the owner and butted in and took over the narration thinking he knows everything lol. Id bet anything that's what happened!
Still living at home and got a job at McDonald's. Saving my money to buy a bike. After a few months, I'll have the money saved up. I'm looking to buy a Honda CRF250R. I'm really excited about buying the bike since it'll be my first big purchase.
JustStayPositive27 it runs like a dream I couldn’t of got a first better bike ! I was so happy with my purchase 2005 Honda crf 250r with tons of life left !
I found a bike and drove 4 hrs to get it. From the start the seller looked shady. He took it off the truck and it started up rode it around and I was convinced so I bought it. Got home and unloaded it and never wanted to start again. Mechanic said the whole top end needed to rebuilt. I should have watched this video first very good info!!
From what I see these bikes are not that beat up. These Honda if well maintained can be beat up for years and will keep on going without any major issues.
just bought a 02 kx125 first 2 stroke didnt really know too much upon closer inspection bike pipe had a giant dent, one of the 2 engine mounts were just snapped in half and the air filter looked like he washed it in mud and the bike was just filthy and the chain was starting to rust... but all of the fluids were prime and it it runs and drives great. I got the bike for $1500
I look for a versatile offroad bike. I ride gnc terrain. A kdx200 or xr600 instead of a cr250. Ive got a cr250 so iam doing suspension jetting. Fmf burly pipe pwk38 carb stock 96 reeds.
PATIENCE IS THE KEY. Bought a 2004 Honda crf450r completely rebuilt for $2,500 and literally a week after I bought it a 2014 Kawasaki 450 was for sale for $2,800 OBO. I was exactly what he said, excited to go ride that weekend. I should've held out. I have a great bike but 10 years is a game changer. 2 chassis changes and EFI by then.
Quick tip; When buying a bike check suspension, wheels, oil leaks, nasty noises when started etc. Throttle cables, bent fuel tap, ripped hand grips don't cost a lot to replace and don't necessarily need replacing. All the above on the bad list are gonna cause big problems and big money.👍
Do you think you could get a 2000 on rm250,Cr,yz,kx just for field use can be scruffy but just want it to run ok ,I would expect chain sprocket,brake pads all that I could do could I get one for under a £1000 because in the UK I am struggling would love some feedback for what you can get over there..☹️👍🏼🇬🇧
Very first thing I would do is take a flashlight and look closely at the oil. Watch for water in oil. Also grab rear wheel and check for excess play in swingarm. That's alot of work to replace. Especially on a old bike. Very, very important on four wheelers. Axle carrier bearings are a nightmare to replace. Hammers,heat and chisels. Yikes. Thumbs up to you.
P.s. if you are throwing chains on your four wheeler, it's either swing arm bearings or axle carrier bearings. Your sloppy bearings are throwing off your chain alignment. There is a incredible force put on these and they don't last forever. Nothing does. Owners will neglect to replace these, because their a nightmare. You have been warned. Happy trails friends.
the brake lever is a bit worn so that could be around $900 to replace. it may also need a full engine rebuild and new forks depending on the type of stickers on the bike.
great video, will definitely use these tips when buying my next bike. Would love to see a guide on how to check if a two stroke engine is in good nick or not, not sure what to check for myself but love the 2 strokers. I bought a used ktm 200 exc and found out it needed a lot more work and parts than I expected. Turned out to be a costly exercise to bring it up to safe condition but I enjoy working and learning about it while I work on the project.
my brothers looking at an 2008 crf250r it has a new engine put in by the guy were buying from (the guys a mechanic that's why I trust the engine is working good) but the throttle cable is kinda rusty looking is that a bad thing?
what bike should a average rider like me buy i have been riding 125cc pitbike but it broke and i didnt think it was not worth to fix and it was starting to be small now i have been looking for ktm 250 suzuki 250 and more similiar bikes what would be good for me im 1.74m long
My bike is 16ish years old and has weird throttle delay, shaky, doesnt show speed or fuel, blinkers are non functional, oil pump doesnt work, leakage in hydro clutch. im satisfied
Just for the fun of it I would like to buy a 125 moto cross bike to rebuild. Any ideas about desirable years and make? Parts availability is a major factor.
I have experience buying a pretty clapped bike so here's a couple tips I have. If you're looking at a 2 stroke, ask them about the top end and the last time it was replaced, let them talk, then remove the 2 bolts and 2 springs holding the pipe on and look into the cylinder. One this tells you how the piston and cylinder are doing and two it tells you if the guy is bullshitting you about everything else!! Double-check the case in front of the sprocket and make sure it's not busted and repaired with putty. Move the steering back and forth and make sure there is no play in the bearing cause that is expensive to fix. What you say in the video is right on about IF THEY WONT LET YOU TAKE THINGS OFF TO INSPECT THEN DONT BUY IT!!!That's all I can think of at the moment.
Can someone help me out??im getting a dirtbike for Christmas and my budget is 2k and the brands I would get is a Yamaha,Kawasaki and Honda I’m 13 5’0 and I have a decent amount of experience with manuals but not so much clutch
In the year 2020, you’re lucky to get your hands on a dirt bike, let alone have a seller allow you to negotiate and analyze every scratch on their dirt bike. The seller will have 50 other buyers lined up, begging to be bumped up in line. Parts of this video are useful, I like asking why they are selling, check compression, start the bike, ride it if they allow it. If it runs and feels good and it’s in your budget, buy it. You don’t have to buy the bike, but going into it if it’s not in your budget, don’t waste your time or the sellers. If you don’t like buying a “used” bike, go spend $11k on a new one.
holy crap though how do you find a complete rm 250 for that cheap ? even rm 250's that im finding that run are asking like 1800 2500. the cheapest one i've found thus far was 400 dollars and it had no title and the engine was seized
backwardsko hell no. That's a 15 year old 250. Not a dollar over $1750. I just bought a 2014 Kawasaki 450 for $2,650. Granted I got a good deal, that's just too steep. Especially for a Suzuki.
Good informal video, i wish ive seen this video before i bought my first motorbike. I was too excited and inexpirenced and most of all i couldnt even test out the bike for myself since i didnt learn how to ride prior to buying it, when the bike came it was ridden to my location for the purchase, i was told only minor problems such as fairings , but when the actual bike came it was more than just fairings, i immediatly saw a broken speed meter worn out tyres and a bent handle, however to my disgust to the bike i wanted to decline but i was alone and he had brought his very intmidating friend that had intimidated me by making me feel as if they didnt come here for nothing, through me being intimidated and knowing nothing about the bike i bought it as the 4th owner where also stroke a cord for me not wanting the bike but i was really uneasy about telling them i didnt want it i ended up buying it for 1400 dollars. When i asked a biker friend who inspired me to look and teach me how to ride he immediatly told me i must of really meant only learning, because the bike ive bought was probaby worth 300 or 400 max price, i was too ashamed to tell him that i spend that much money on some junk like this so i asked him how much did he think it would cost to reapir and get it to stock, he told me about 200 to 300 for everything because judging from the oil being black and dirty the bike probably was never serviced and just added more oil to it so its really bad condition, now im here feeling really bad about my decision about buying a bike i really wished ive seen your video before i bought my bike! This should be standard information any beginner should know about used bike and what to look for. Although whats done is done i now know what to look for for my next purchase. Thank you great video thumbs up
As a seller of a bike (2003 xr 80r) that doesn't have a title but I know the original owner, he gave it to me for free because it was blown up and it was my first bike. Is there any way to get a title for it? I'm in PA btw
i found an 04 rmz 250 that 'just needed shims' for $700. turns out we had to replace all valves, as well as alot of work done on the top end, had to replace the master cylinder for the rear break and a ton of other little issues. all said and done it cost about $1600, but now i have a great bike that starts first kick and runs really well and should keep going for a long time since the top ends brand new. so do you think it was a good price to pay or was it not worth all the money?
You take a huge gamble buying a used dirt bike from someone you don't know. Steering stem bearings, swingarm bearings and bushings, crank and bottom end etc. I have sold most of my older bikes to friends that wanted to start riding. If you purchase a bike from someone that has extra parts like clutch cables, brake pads, extra air filters it can be a good sign that they probably take care of there bikes. I have included similar items when I sold my old race bikes.
It would be more beneficial if you had a check list that you could go through to buy any bike. Cosmetic things from laying the bike over is going to be common and expected. A compression check is the most important. Also getting recipes and documented repairs.
If I were to get a bike I'm not gonna tear it down with the air filter anyone would be weary of that and also people would be weary of you just laying it down I notice people don't like that
How about a brand new yamaha that has been seating in my shop for about 10 years never been road at all just bought it from D&Yamaha and just need to sell it it's a ttr110 2009 .
I bought a 2015 CRF250R and we met the guy half way and he said he doesn’t have a title so it sucks so if you find a bike that’s perfect still check everything else
I'm thirteen and I'm buying a TTR 90, as a pit bike of course. I've sat on it, and it's a decent fit? I'm 5'1 and can stand over it, but my knees weren't near the handlebars from where I was sitting. Also, it's obviously gonna be smaller because it's a pit bike, but do you think a 90 is gonna be good for me, especially if I haven't ridden a bike in years? I'm not gonna race so I don't need an insanely fast bike, so...
yeah most of that id agree with 100% but the extra oil can stay on the plates and in the side of the crank when changing it so even just starting it up can make it dirty looking again. i always put no offers over the phone due too most always try to jew again in person plus mines usually already low balled to sell to begin with. id add stuff about modified for performance on MX bikes thats always expensive just to keep up in general if you dont need the extra power (ex: kxf250 piston=$87, 280big bore piston=$143 plus jetting changes)
I got my yamaha yz 85 05 a while back and it seemed in good condition but the guy was sketchy and he barely answers any of my questions but I checked the coolant and stuff and it seemed fine then I rode it through all the gears and It was fine but when I brought it home and I started it up it sounded different and I put it in first gear and it would just died so I would start it up and give it gas as I put it in first and as I was giving a gas it was moving forward so I knew the clutch was slipping so I let out the clutch and it started making clicking sound and it did the same for 12345 well it was wierd bc I was working fine earlier and I check the coolant and it was low and then I check the oil and the coolant was in the oil so it makes it milky. so this guy said he did a bottom and top end rebuild but when he did the bottom end rebuild he put it together wrong and the shifting forks were in the wrong position and they bent
Not too sure about this video. Look at the big picture. Get a good engine, in a decent year, from an owner who a) took great care of it, b) let it sit in the garage. Strip everything off and go through it. You have to - motorcycles are too dangerous. You'll find something somewhere. As long as there is compression, no clutch issues, no signs of a major wreck, bent frame or wheels, replace the parts and have fun with the bike. Most of the time, its a case of the bike sitting. Get a rebuild kit for the carb and that's it. Check the year on the tires, get new tubes in them.
how much wud u pay for an 04 crf250 needs new tires chain nd sprocket piston nd doesnt shift thru all gears .... i paid 1050$ just wondering if i got a gud price
+Fr3ShPRiNC3 i fixed it ..... i only paid 20$ for the shift forks nd 110$ for the piston .... i kept the same chain n sprocket nd tirez cuz they wasnt that bad ... total i pad 1180$
Biggest thing for me... "has it ever been to the sand?" If they say yes no matter what don't buy it. You can tell by either a flag mount, hole drilled in the fender, or find a crevice where sand could be cuz one time in the sand the bike will always have sand in it somewhere
i sold my 2007 CRF150R to my friend i had it for almost a year selling it to him for $1,600 clean title had some bent bars torn grips and a missing bolt he knew all about it since he rode it too before and what not and now its got moose racing bars aftermarket unbreakable levers repacked exhaust fork seals
Do you guys sell bikes? I am in the market for a KLR650 ... i personally have never RIDDEN or OWNED but i kno wat im getting into. would love to hear some word of advice from you fellas
Very helpful I'm looking to buy a bike now
Track Boyz take your time I got my bike yeaterday and now I'm waiting on a new front sprocket!
Thanks
@@keiserewy5353 do you know any websites to find some bikes to buy? I'm looking for a 125 2-stroke
firestone4566 gumtree
@@kacperviechorek279 man when i got my crf250r the bike i was talking about was supposed to be a complet rebuild but the clutch was fucked and the head was fucked so i just got a down payment on a new one and its the best way to go man you'll know the full history of the bike and wont habe to worry about some scum that wats a pay day
The grip is ripped, therefore it needs a $900 FMF system and and Hinson clutch.
no,no,no the grip is ripped. So he wore out and had to replace the exhaust and clutch.
😆 🤣 😂
The seat has worn away a bit therefore it may need a completely new engine
lol
Lol
yes
Read that and thought about Apple yo 🤦♂️🙄
A_Better_Player 69 oh your charger broke? Then I’d recommend also buying our new IPhone 13 that has 6 cameras yes 6!
This guy could find something wrong with a brand new bike.
thats not as hard to do as you think lol
😂
😆😆😆😆😆
Don’t take him car shopping
Craigslist sellers need to see this video cuz they are over asking on every atv or bike
i noticed that too - they must be expecting to be low balled. I see the asking price, consider them crazy and move on down the list... I wont call if they are asking too much.... I will ALWAYS call if those three little letters OBO are displayed
Craigslist, marketplace 7+yr old bikes, selling for more then a brand new bikes at the dealership.
This bike has ugly graphics therefore it needs a rebuild
Casey Lee I've seen you comment on loads of different videos :)
Adam Aston we must like the same kind of stuff then! :)
This is why I'm glad the person I first bought a bike from was such a great guy. Very polite on the phone, answered all my questions, got the price lowered on the phone and he agreed to hold it for two days. I showed up to a bike in great condition and he did all the regular maintenance just before selling it, including an oil and spark plug change before he handed over to me. Too bad he sold it to me, I've been comparatively brutal to the machine! XD Luckily I plan to ride it until it dies. But if I ever have to sell a bike in the future, I'll make sure to pass on what he did for me and give the next guy the same amount of respect.
You're a good guy *Jacob Shepard*. Thanks for sharing with us!
If only everyone was as decent as that mate half the time some1 selling there most prized possesion there hobbie cause it no longer running yet they say runs rides with no problems if only
This bike has a little fuel left in the tank. That being said it maybe time for a top end rebuild or valve check. Keep that in mind before purchasing a used bike with a little fuel left in the tank.
And remember, if it has custom graphics and sponsor stickers - it may need a rebuild
Metal Mulisha stickers or graphics kits are an instant red flag. If I see a paddle tire that's an instant no. Stickers all over is a no. Bikes stored outside are a no.
Also even in states like Oregon where a title isn't required, do not buy without a title. People like to sell them without the title and then report them as stolen and get their bike back and keep your money
Weekend Warriors that's what a bill of sale is for.
Stephen Newton People try to sell without a bill of sale too
Trying to sell without a bill of sale is a bigger red flag than any of the ones that you mentioned. That doesn't even make sense. Why would anyone deny a bill of sale?
I like paddle tires there bad ass
Previous owner of the RM250 *spray painted plastic
“This guy Obviously doesn’t know what he’s doing mechanically”
Lol the comments on this video are gold! Gold!!!
He painted his plastics. Clearly it needs a rebuild. 😂😂😂🤙
Yeah this guy sounds like a huge doucheeee
@@92suzukigsx1100g The really knowledgeable guys over there probably wanted to make this video and this guy is probably the owner and butted in and took over the narration thinking he knows everything lol. Id bet anything that's what happened!
That's insane there's people with blown up 1999 125 & 250's asking for 1000+ .... I wish I lived in cali
No you don't.
Triston Charge lol 👍, I live in Cali , it isn't all you think it is here .
jack sisneros cali isnt really that great
Big poppa Brian cells hahahaha.
thanks never spelled brain before. You're ? They're?
Good tips, but this guy could find problems with bikes still on the showroom floor
Still living at home and got a job at McDonald's. Saving my money to buy a bike. After a few months, I'll have the money saved up. I'm looking to buy a Honda CRF250R. I'm really excited about buying the bike since it'll be my first big purchase.
Awesomejuggler20 you got it?
Me too hopefully tomorrow I hope this bike is not clapped out wish me luck
Walker Stutts how was it!
JustStayPositive27 it runs like a dream I couldn’t of got a first better bike ! I was so happy with my purchase 2005 Honda crf 250r with tons of life left !
Walker Stutts great to hear hahah, have fun bro!
I found a bike and drove 4 hrs to get it. From the start the seller looked shady. He took it off the truck and it started up rode it around and I was convinced so I bought it. Got home and unloaded it and never wanted to start again. Mechanic said the whole top end needed to rebuilt. I should have watched this video first very good info!!
Voice crack at 6:47
I just went and looked at a CRF250X, as I was opening the air filter door I heard the seller groan. That told me all I needed to know. 🤣
a new carburetor? ?...no...how about a new float and clean it well with cleaner.. maybe new bowl gasket and needle and seat.. def not a whole carb lol
It could be worn out the bit that slides up and down and that could have damaged the carburator housing.
Found a Kx250f for 2600. Good condition. I might get it for my 14th birthday.
Great advice from a down to earth man. I wishI lived near him. He seems like a dude you can trust.
I wish I lived Where you live because here in ny a rm250 in that condition would prob cost 1500
Jadenbatman I know right it sucks here in NY, I am trying to buy a 125 2 stroke and I see 2007's for 3 grand
mumsa hul yea it sucks
mumsa hul if you take some time and come down to Massachusetts 125's can be at great prices. I got my 2006 cr125 for 1800 used. It's a RIPPA!!
mumsa hul same. Massachusetts and Vermont usually have some more reasonably priced bikes. But ny is insane
well... I'm looking and have seen 1995 250 for 1500 and all the 04-09 are around 2k
From what I see these bikes are not that beat up.
These Honda if well maintained can be beat up for years and will keep on going without any major issues.
MXSHOWTIME007 wow your really smart bro I should definitely take advice from you
hondas seem blow up more often than any other bike...
Honda’s don’t blow that often but they are not cheap
Alex Bittle no dirtbike is "cheap" but from the big 6 many facturers, Honda comes in at 5th on price point. The only cheaper MSRP is Yamaha.
@@pawpawdave1 Thumbs up for IRONY! LOL
just bought a 02 kx125 first 2 stroke didnt really know too much upon closer inspection bike pipe had a giant dent, one of the 2 engine mounts were just snapped in half and the air filter looked like he washed it in mud and the bike was just filthy and the chain was starting to rust... but all of the fluids were prime and it it runs and drives great. I got the bike for $1500
10:12 is so stupid, I only txt when I sell thing because I want all the conversation on record or I'm busy and can't take calls
Your are very right about one point you made, you drive for 3 hours you don't want to come back empty handed, even though you should.
I've been looking for about two weeks and found 2 good deal. one sold out from under me, and I'm looking into the other.
Good luck. Don't let your emotions push you into buying, use your head.
Really well done, thorough and informative, thanks
Thanks for watching!
Well done and very comprehensive J! Super helpful, enjoy all of your videos, thanks so much for your effort, much appreciated.
You're damn right I ride my CRF50 hard? Indoor kart tracks keep me sane in the winter.
I look for a versatile offroad bike. I ride gnc terrain. A kdx200 or xr600 instead of a cr250. Ive got a cr250 so iam doing suspension jetting. Fmf burly pipe pwk38 carb stock 96 reeds.
Very informative I'm looking forward to buying a bike soon
What about bikes that have a "bill of sale" or what if the bike has rust on its exhaust?? I test drive it n turns on with one kick
Also great video! It really helps out for in the future, when it comes to buying bikes!
PATIENCE IS THE KEY. Bought a 2004 Honda crf450r completely rebuilt for $2,500 and literally a week after I bought it a 2014 Kawasaki 450 was for sale for $2,800 OBO. I was exactly what he said, excited to go ride that weekend. I should've held out. I have a great bike but 10 years is a game changer. 2 chassis changes and EFI by then.
Quick tip; When buying a bike check suspension, wheels, oil leaks, nasty noises when started etc. Throttle cables, bent fuel tap, ripped hand grips don't cost a lot to replace and don't necessarily need replacing. All the above on the bad list are gonna cause big problems and big money.👍
Extremely informative.
Do you think you could get a 2000 on rm250,Cr,yz,kx just for field use can be scruffy but just want it to run ok ,I would expect chain sprocket,brake pads all that I could do could I get one for under a £1000 because in the UK I am struggling would love some feedback for what you can get over there..☹️👍🏼🇬🇧
Bikes I like to look for are those very clean low hour bikes that look mostly original.
Very first thing I would do is take a flashlight and look closely at the oil. Watch for water in oil. Also grab rear wheel and check for excess play in swingarm. That's alot of work to replace. Especially on a old bike. Very, very important on four wheelers. Axle carrier bearings are a nightmare to replace. Hammers,heat and chisels. Yikes. Thumbs up to you.
P.s. if you are throwing chains on your four wheeler, it's either swing arm bearings or axle carrier bearings. Your sloppy bearings are throwing off your chain alignment. There is a incredible force put on these and they don't last forever. Nothing does. Owners will neglect to replace these, because their a nightmare. You have been warned. Happy trails friends.
Great content in this video, thank you Rocky Mountain. By the sounds of the recommended pricing I need to start buying my toys in California.
the brake lever is a bit worn so that could be around $900 to replace. it may also need a full engine rebuild and new forks depending on the type of stickers on the bike.
Christian Beall I wouldn't buy anything with a metal mulisha sticker on it lol
Would you?
great video, will definitely use these tips when buying my next bike. Would love to see a guide on how to check if a two stroke engine is in good nick or not, not sure what to check for myself but love the 2 strokers. I bought a used ktm 200 exc and found out it needed a lot more work and parts than I expected. Turned out to be a costly exercise to bring it up to safe condition but I enjoy working and learning about it while I work on the project.
my brothers looking at an 2008 crf250r it has a new engine put in by the guy were buying from (the guys a mechanic that's why I trust the engine is working good) but the throttle cable is kinda rusty looking is that a bad thing?
what bike should a average rider like me buy i have been riding 125cc pitbike but it broke and i didnt think it was not worth to fix and it was starting to be small now i have been looking for ktm 250 suzuki 250 and more similiar bikes what would be good for me im 1.74m long
My bike is 16ish years old and has weird throttle delay, shaky, doesnt show speed or fuel, blinkers are non functional, oil pump doesnt work, leakage in hydro clutch.
im satisfied
The title fell off the bike, instant red flag
Just for the fun of it I would like to buy a 125 moto cross bike to rebuild. Any ideas about desirable years and make? Parts availability is a major factor.
I have experience buying a pretty clapped bike so here's a couple tips I have. If you're looking at a 2 stroke, ask them about the top end and the last time it was replaced, let them talk, then remove the 2 bolts and 2 springs holding the pipe on and look into the cylinder. One this tells you how the piston and cylinder are doing and two it tells you if the guy is bullshitting you about everything else!! Double-check the case in front of the sprocket and make sure it's not busted and repaired with putty. Move the steering back and forth and make sure there is no play in the bearing cause that is expensive to fix. What you say in the video is right on about IF THEY WONT LET YOU TAKE THINGS OFF TO INSPECT THEN DONT BUY IT!!!That's all I can think of at the moment.
Can someone help me out??im getting a dirtbike for Christmas and my budget is 2k and the brands I would get is a Yamaha,Kawasaki and Honda I’m 13 5’0 and I have a decent amount of experience with manuals but not so much clutch
Good, informational vid. Thanks guys!
In the year 2020, you’re lucky to get your hands on a dirt bike, let alone have a seller allow you to negotiate and analyze every scratch on their dirt bike. The seller will have 50 other buyers lined up, begging to be bumped up in line. Parts of this video are useful, I like asking why they are selling, check compression, start the bike, ride it if they allow it. If it runs and feels good and it’s in your budget, buy it. You don’t have to buy the bike, but going into it if it’s not in your budget, don’t waste your time or the sellers. If you don’t like buying a “used” bike, go spend $11k on a new one.
holy crap though how do you find a complete rm 250 for that cheap ?
even rm 250's that im finding that run are asking like 1800 2500.
the cheapest one i've found thus far was 400 dollars and it had no title and the engine was seized
Review Guy there is a guy an hour away from me selling a MINT condition rm250 2004 is it worth 3k?
backwardsko hell no. That's a 15 year old 250. Not a dollar over $1750. I just bought a 2014 Kawasaki 450 for $2,650. Granted I got a good deal, that's just too steep. Especially for a Suzuki.
Great great video. Thank you so much🙏👨🏻🎨 Yama
Good pointers for consideration on getting a used bike.
Good informal video, i wish ive seen this video before i bought my first motorbike. I was too excited and inexpirenced and most of all i couldnt even test out the bike for myself since i didnt learn how to ride prior to buying it, when the bike came it was ridden to my location for the purchase, i was told only minor problems such as fairings , but when the actual bike came it was more than just fairings, i immediatly saw a broken speed meter worn out tyres and a bent handle, however to my disgust to the bike i wanted to decline but i was alone and he had brought his very intmidating friend that had intimidated me by making me feel as if they didnt come here for nothing, through me being intimidated and knowing nothing about the bike i bought it as the 4th owner where also stroke a cord for me not wanting the bike but i was really uneasy about telling them i didnt want it i ended up buying it for 1400 dollars. When i asked a biker friend who inspired me to look and teach me how to ride he immediatly told me i must of really meant only learning, because the bike ive bought was probaby worth 300 or 400 max price, i was too ashamed to tell him that i spend that much money on some junk like this so i asked him how much did he think it would cost to reapir and get it to stock, he told me about 200 to 300 for everything because judging from the oil being black and dirty the bike probably was never serviced and just added more oil to it so its really bad condition, now im here feeling really bad about my decision about buying a bike i really wished ive seen your video before i bought my bike! This should be standard information any beginner should know about used bike and what to look for. Although whats done is done i now know what to look for for my next purchase. Thank you great video thumbs up
If someone came to buy a bike from me and laid it in the dirt I'd lose my shit.
As a seller of a bike (2003 xr 80r) that doesn't have a title but I know the original owner, he gave it to me for free because it was blown up and it was my first bike. Is there any way to get a title for it? I'm in PA btw
I wouldn’t want to sell a bike to this guy
i found an 04 rmz 250 that 'just needed shims' for $700. turns out we had to replace all valves, as well as alot of work done on the top end, had to replace the master cylinder for the rear break and a ton of other little issues. all said and done it cost about $1600, but now i have a great bike that starts first kick and runs really well and should keep going for a long time since the top ends brand new. so do you think it was a good price to pay or was it not worth all the money?
Im looking a bike though kindof that honda..how much would you go for it ?
I love the super beat atvs and bike on craigs asking that are "going for" 3500
I've never had a dirt bike but would a title or insurance be required for it
I have a COST PROHIBITIVE 2001 kx125. I learned the hard way.
Are you selling those bikes in the background if so whare is your shop?
I'm hoping to get a 2001 Suzuki 250 what should I look for
Can someone help me I’m 13 years old and trying to buy a dirt bike ( I never had one so what do u guys recommend)
If your like over 5 ft a crf 150r is a good one
Ttr 125s
You take a huge gamble buying a used dirt bike from someone you don't know. Steering stem bearings, swingarm bearings and bushings, crank and bottom end etc. I have sold most of my older bikes to friends that wanted to start riding. If you purchase a bike from someone that has extra parts like clutch cables, brake pads, extra air filters it can be a good sign that they probably take care of there bikes. I have included similar items when I sold my old race bikes.
It would be more beneficial if you had a check list that you could go through to buy any bike. Cosmetic things from laying the bike over is going to be common and expected. A compression check is the most important. Also getting recipes and documented repairs.
Those are good tips! We've been wanting to update this video and those would be great additions. Thanks for the input.
Hey am lucky from Nigeria west Africa I need one of this dirt bike for adult how much can cost me if I want to buy Honda product
very enjoyable video bro thanks
If I were to get a bike I'm not gonna tear it down with the air filter anyone would be weary of that and also people would be weary of you just laying it down I notice people don't like that
I searching and highly needed for a supplier of second hand fork that’s have an affordable price sir can u be ? Or recommend someone?
How about a brand new yamaha that has been seating in my shop for about 10 years never been road at all just bought it from D&Yamaha and just need to sell it it's a ttr110 2009 .
What is a good price for a 2004 Honda crf 150f
Good video....I always look at the sticker kit, if it was just washed, and when you call the guy does he sound like a bro.
Excellent information, thx very much.
can you point me in the right direction to buy a bike for less then 600
i wish i would have known some of this stuff when i went to buy a fourwheeler
*Ams Gaming* - good stuff to know. Thanks for watching
You should noticed the suspension, gaskets
play and bearings! Good video
Good point! Thanks for sharing with us all. ~Vinny
@@rmatvmc Also, roll bike into immovable object and listen/feel for shot headstock bearings.
All I can find is how to buy a used bike but not WHERE I'm only looking on kijiji and Facebook market place
I really want want one but they're soooo expensive and I can't afford one
do you guys sell bikes...you seem very trustworthy i want to buy one.
Planning to buy cr50 for my Son..where to buy?thanks
Why is it wrong to spray paint plastics?
Craigslist: 2004 crf50 $2000 firm with price
I bought a 2015 CRF250R and we met the guy half way and he said he doesn’t have a title so it sucks so if you find a bike that’s perfect still check everything else
I'm thirteen and I'm buying a TTR 90, as a pit bike of course. I've sat on it, and it's a decent fit? I'm 5'1 and can stand over it, but my knees weren't near the handlebars from where I was sitting.
Also, it's obviously gonna be smaller because it's a pit bike, but do you think a 90 is gonna be good for me, especially if I haven't ridden a bike in years?
I'm not gonna race so I don't need an insanely fast bike, so...
I think you should get 110 cc.
I’m also 13 and had a 90 but it just wasn’t enough power
honestly at the end of the day, worst case scenario for motocross ur paying 1-2.5k for a top and bottom end rebuild, right??
yeah most of that id agree with 100% but the extra oil can stay on the plates and in the side of the crank when changing it so even just starting it up can make it dirty looking again. i always put no offers over the phone due too most always try to jew again in person plus mines usually already low balled to sell to begin with. id add stuff about modified for performance on MX bikes thats always expensive just to keep up in general if you dont need the extra power (ex: kxf250 piston=$87, 280big bore piston=$143 plus jetting changes)
Thanks 👍
I'm going to save this informative video.
I got my yamaha yz 85 05 a while back and it seemed in good condition but the guy was sketchy and he barely answers any of my questions but I checked the coolant and stuff and it seemed fine then I rode it through all the gears and It was fine but when I brought it home and I started it up it sounded different and I put it in first gear and it would just died so I would start it up and give it gas as I put it in first and as I was giving a gas it was moving forward so I knew the clutch was slipping so I let out the clutch and it started making clicking sound and it did the same for 12345 well it was wierd bc I was working fine earlier and I check the coolant and it was low and then I check the oil and the coolant was in the oil so it makes it milky. so this guy said he did a bottom and top end rebuild but when he did the bottom end rebuild he put it together wrong and the shifting forks were in the wrong position and they bent
Not too sure about this video. Look at the big picture. Get a good engine, in a decent year, from an owner who a) took great care of it, b) let it sit in the garage. Strip everything off and go through it. You have to - motorcycles are too dangerous. You'll find something somewhere. As long as there is compression, no clutch issues, no signs of a major wreck, bent frame or wheels, replace the parts and have fun with the bike. Most of the time, its a case of the bike sitting. Get a rebuild kit for the carb and that's it. Check the year on the tires, get new tubes in them.
how much wud u pay for an 04 crf250 needs new tires chain nd sprocket piston nd doesnt shift thru all gears .... i paid 1050$ just wondering if i got a gud price
everything else is in good condition
Street Demon lol you didn't , and I can only guess you haven't fixed it yet ? And if you did it costed a shit ton .
+Fr3ShPRiNC3 i fixed it ..... i only paid 20$ for the shift forks nd 110$ for the piston .... i kept the same chain n sprocket nd tirez cuz they wasnt that bad ... total i pad 1180$
+Fr3ShPRiNC3 i think 1180$ is gud .... i cant seem to find a bike on craigslist for 1000$ nd ive been searching for awhile
Street Demon oh it was just the piston , thought you meant it was locked up. Did you do the work ?
Thank you 😊
Good video. Everyone is rebuilding them nowadays.
Biggest thing for me... "has it ever been to the sand?" If they say yes no matter what don't buy it. You can tell by either a flag mount, hole drilled in the fender, or find a crevice where sand could be cuz one time in the sand the bike will always have sand in it somewhere
i sold my 2007 CRF150R to my friend i had it for almost a year selling it to him for $1,600 clean title had some bent bars torn grips and a missing bolt he knew all about it since he rode it too before and what not and now its got moose racing bars aftermarket unbreakable levers repacked exhaust fork seals
By far, the best video on this subject I have seen...if I lived in your town I would come straight to your shop to buy a bike...thanks for posting.
only on a kawi can you ruin the carb by leaving the fuel on
Mitch Braaaps gasoline goes bad in 3 weeks that will mess up any bike
Do you guys sell bikes?
I am in the market for a KLR650 ... i personally have never RIDDEN or OWNED but i kno wat im getting into. would love to hear some word of advice from you fellas
J Reyes start with a KLX140L. It's fun to ride and less expensive.