Tech-tip: WE/TM Glock series GBB full resassembly guide - Frame

[@johnalexanderbjrkhaug1249]

Thank you so much👍 The spring in the mag release fell out on my glock, and I didn't know where it was suposed to go. If it wasn't for this video I would probably never have found out either. I'm subscribing👍

[@CJAwesome83]

Awesome, glad the video helped you out! :-D

[@dragonslayer9844]

Same this guy just saved my soul from exploding

[@patty190]

exCt same rhing happened to me bruh appreciate this man

[@drangusbadger1976]

Just used your disassembly and reassembly video to repair my ages-old Echo 1 Timberwolf along with adding some brand new parts. This was immensely helpful and easy to follow. Great job!!

[@CJAwesome83]

Awesome, glad it was helpful! :D

[@blackshadows1992]

dude you just saved my life with this video 14:57 - 17:05 thanks for uploading this video it really helped!!!

[@CJAwesome83]

Glad it helped!

[@regimes]

STILL the best videos on diss- and reassembly of GBB's on this PLANET.

[@CJAwesome83]

Thank you very much for the kind words, nice to know the video still holds up after a couple of years :-D

[@BalearicBeatnik]

thank you for this, just done my first field strip as its stopped working and found the seals have dried up and perished, old GBB i dug out from a cupboard - really useful for a n00b like me - cheers

[@CJAwesome83]

Always happy when someone's helped by my videos :-)

[@alexanderjames6440]

I just wanted to send you the biggest thank you I can muster!!! My glocks trigger jammed and without your videos I don't think I would've had the confidence to fix it . Thank you so much dude

[@CJAwesome83]

Many thanks for your thanks! :-D
Always makes me happy when my videos help someone!

[@simonandrew5456]

Thank you, one of the most helpful videos I ever watched....because I opened it and I told myself...DEAD...FINISHED.....with your help...it's back.

[@CJAwesome83]

Great, happy the video helped you out :-)

[@LastStar007]

6 years old and you're still a lifesaver.

[@CJAwesome83]

Noice :-D

[@kengrier948]

Thank you for the very good tutorial.

[@CJAwesome83]

No problem :)

[@dude...are-you-sure]

your hammer housing assembly has got to be the best way to put it all together. of all the videos i watched on youtube on that particular assembled subunit, non had done it the way you did. the other methods all had the installer trying to hold that spring in the cocked position and that makes the installation almost impossible for a newbie like myself. thanks to you i will no longer be afraid of taking that hammer housing apart~

[@CJAwesome83]

Thanks for the feedback man. Glad you got help from it. I am pretty pleased with the way I was able to put the hammer housing back together :D

[@tommie2928]

Hands down the best dissasembly and resassembly vid you can find on any gun, I wish you did all the GBBp and GBBr assemblies 😋

[@CJAwesome83]

Thank you very much. If I had 100% free time and $1,000,000,000 USD I would buy all GBB guns/rifles and do videos all day :-p
Sadly, I don't have a billion dollars :-(

[@tommie2928]

@@CJAwesome83 I think we all wish to have that haha. Atleast youre doing a great job with the stuff you have right now :)

[@michaeless882]

Thank you so much. I used this video along with the disassembly guide to convert my WE to TM running springs and valves. All this applies to Gel Blasters (I am in dystopia australia) same principals apply. BTW a WE Gen3 cost me USD175 give or take and a new outta the box TM costs USD800 give or take. The spring and valve kit cost me next to nothing -- very few guys here know how to do a COMPETENT task.

[@CJAwesome83]

Awesome, always makes me happy when my videos help someone out! I have heard about "airsoft" in Australia and I really feel for you man, no access to real fire arms or even decent looking and functioning replicas :-|
That's rough!

[@michaeless882]

@@CJAwesome83 Thank you too. I buy a lottery ticket a few times each year and if I ever won my intention is to pack up and move to Arizona which has a lot going for it (especially good laws in favour of Sporting Shooters).

[@JJ2019P]

I always had hard times with inserting the hammer into the chassis. I just finished disassembling and reassembling my vx9, thank you so much!

[@maxdd4124]

Awesome thank you sooooo much! I accidentally removed the slide lock pen in my curiosity and I couldn’t fix it on my own thank you sooooooooooooooooooooo much !!!!

[@CJAwesome83]

Cool, glad you found the video helpful :)

[@Juanitoveintittres]

Brother from another mother thank you so much for your vid by far is the best one on the tube I finally got to install my cow cow trigger thanks to you

[@popacepi971]

thank you for this video, very helpful because i had disassemble my we g17 and of course i was not able to build it back in until i saw your video, cheers my dude !!!!

[@CJAwesome83]

Thank you for the kind comment :-)

[@iareairsofttj888]

Best tutorial on airsoft gun I have seen. Thank you for this 💯

[@CJAwesome83]

Thanks! Glad you got helped by the video :-)

[@robbhart452]

Awesome guide, replacing my hammer roller for a bearing one was a breeze thanks to you !

[@CJAwesome83]

Glad it helped!

[@viktoresin9010]

Thank you alot, your video is very helpful. I have no idea what i would do without you.

[@CJAwesome83]

Thanks for the comment! Always happy when my videos are helpful :-)

[@kingjess89]

Your video helped me alot with my tti glock17❤❤ i had trouble reassemble my hammer

[@az96b2]

Huge thanks my trigger stopped working and i dismantled it without knowing how to reassemble. It was fiddly but I've fixed it now thanks!

[@CJAwesome83]

Awesome! Glad you were helped by the video :-)

[@lewispoole9902]

Thank you so much for this I had to rebuild my Hammer/ Valve knocker set with the parts I had spare and some tweaking I have a functional unit!

[@WZNGT]

Whew... took my Fighting Bro G17 apart this afternoon to replace the cracked plastic trigger. I spent most of the time on getting the pins into the new one (holes were kinda too small), but eventually I got it assembled and working fine with your video.

[@CJAwesome83]

Awesome, glad to hear it. Always happy to help :-)

[@RegretfullyMine]

Thank you! I was using my g17 as a prop and one of the guys on set fidgeted around with it too much and messed up the mag release. It’s back to normal now.

[@CJAwesome83]

Always happy to help :-)

[@JakezMad]

the slide catch had come out at some point in disassembly and I had no idea but I fixed it working back through the with your help thanks a lot man

[@odeltabura7200]

Thank you.. It's very useful for us that don't know how to fix..

[@CJAwesome83]

Awesome, always happy when this helps someone :)

[@l1k0s4ever]

thank god i found this tutorial, all rest on the web have the springs installed wrong, have been troubled for weeks

[@CJAwesome83]

Thanks for the feedback man! Make sure to share this video so other's don't have to suffer like you did ;-)

[@ZawcheeOnYoutubeDotCoom]

no cap worlds most comprehensive toY glock reassembly

[@kim_withdraw]

YOU are my true hero :)

[@CJAwesome83]

Thank you :-)

[@barryjohnson8733]

Thank you I was having some trouble with my gun

[@CJAwesome83]

Awesome, glad the video helped you out! :-)

[@propamintsunshine213]

You just helped me fix my glock

[@WrongFromWright]

Just fixed my stark arms g19 with this vid. Theres one more step to the SA, but it was quite easy to figure out. Thanks again!

[@CJAwesome83]

Yeah the Stark is a little bit different actually.
Perhaps I should do a video like this for my stock SA Glock 19 before I sell it :-D

[@WrongFromWright]

Maybe you should. I might be interested in purchasing it from you.

[@CJAwesome83]

Ah. Yah know what the problem is shipping, handling and customs which makes it very difficult to give you a decent price on it so I prefer domestic sales as my first route. But if you really want it I am open for that as well.

[@jamesdibben2002]

Really helpful and easy to follow guide! Thanks!

[@CJAwesome83]

Glad it helped!

[@Gienkuu]

Right as you were saying that you should be careful with the valve knocker spring it flew off somewhere into my room and I'm not sure if I will find it.
Good video tho 💪💪💪
Additionaly I have some parts that were not in the video (maybe because mine is an g18c)

[@machonacho95]

Thank you very much, this helped me tremendously to install the Action Hammer Bearing Set in my WE Glock 17!

[@CJAwesome83]

No problem man! Glad you found the video helpful! :-D

[@Frambhueee]

How good is the action hammer bearing? Doesn't have any issues til now?

[@sgtcampbell]

Thanks for this. Very helpful

[@CJAwesome83]

You're welcome!

[@buddhab0mb254]

Thank for this video man, you are a life saver

[@CJAwesome83]

Glad it helped :-)

[@nyts_ride2732]

Thank you bro ! You helped me so much !

[@CJAwesome83]

+Tony Jespersen Glad you found it useful :D

[@bilguun5818]

Thank you my dude😎. Helped me a lot

[@AlvinHariPrasetyo]

Thanks brother

[@gorman2274]

Buraz ti si moj spasitelj!!!

[@andyreddington3201]

Thank you so much. This was very very helpful

[@CJAwesome83]

You're welcome! :D

[@user-xk6uk2vx5o]

thank you sooooooooooooooooo much this video help me very much thx

[@CJAwesome83]

You're welcome. Glad you found it useful :D

[@Jinchuurikizinhu]

exxxxcelent. helped me a lot to understand how it works and "fix" my G!

[@CJAwesome83]

You're welcome :)

[@kurdapiotv8833]

Done! Ty so much!

[@CJAwesome83]

You're welcome :-)

[@MAVERICK-tc2vw]

You are a LEGEND!!!

[@CJAwesome83]

Thanks :D

[@gustavolozano307]

You save my life! Amazing video! Thanks bro!

[@CJAwesome83]

Thanks man. Glad you got help from the video :)

[@JoeJ523]

How to make the trigger pull alot lighter???????? Awesome video by the way!!!!!

[@Bender_B._Rodriguez]

Like the top commentor I have the same timberwolf, no lower upgrades but I thought my trigger got stuck againbecause it happens from blue moon to blue moon and that requires the entire teardown.
I forgot about the trigger lock airsoft g series have and that may have been the culprit instead of the trigger just locking up like it has done before.
This thing is really old and worn the fuck out and im suprised it still works.

[@mikestriker4371]

cool thanks

[@CJAwesome83]

No problem!

[@raymenchu7745]

Very nice

[@AeroLogics]

thank you so much

[@CJAwesome83]

:D

[@MrMirkoxx]

you saved my li..money :D thank you bro. really nice and helpfull video!

[@CJAwesome83]

No problem man! :D

[@leonardovand]

Thanks bro!!!

[@nurmohammedabdullatiff7234]

Very2 good tq bro

[@thomaswente7584]

Very helpfull thx!

[@shitfacetv7838]

Can you put the mag release to the other side if you are left handed or not ?

[@SaltedChili]

Great video

[@rioentertainment218]

Sir can u tell me why sometimes i shooting my gun goes to full auto?

[@DjGoB79]

tnks man , help me a lot .A+ for you

[@CJAwesome83]

Awesome! :D

[@amishwaseem546]

Bro need help I have a we Glock 17 gen 5 it’s Barrel is stuck it’s not going forward or backward means I can’t load my gun and can’t take it off it’s barrel

[@Peter-wo4uo]

Hey man, my hammer spring broke, any way i can buy one?

[@CJAwesome83]

For WE OEM parts check out KY Airsoft: www.kyairsoft.com/
Direct replacement part: www.kyairsoft.com/parts/we-pistols-gbbp/g-series/g-g-22-semi-gbbp.html

[@monstraogamer8188]

Nice!!! Tks

[@kimocruz3584]

i lost my valve reset knocker and it seems my gun works fine but it seems a lot less gas efficient is that an issue?

[@CJAwesome83]

Yes, that is an issue. The valve reset knocker resets the valve knocker and closes the gas flow when the slide blows back. You need to replace it!

[@slzslz]

Great tutorial! Gotta ask you, on my KJW Glock 19, i get light striking. Everyone said the hammer spring so i replaced it, using this guide. Problem still persists...what should i try now?

[@CJAwesome83]

Could be that your valve knocker is worn or broken and not striking the magazine valve fully which would explain why an upgraded hammer spring did not solve the issue.

[@edwardleonen1442]

Is the real glock 19 frame parts can fit into that polymer frame?

[@CJAwesome83]

No.

[@edwardleonen1442]

@@CJAwesome83 maybe the umarex will fit

[@JosephPowel]

Yes they can

[@lmostayoutuber]

I built a g26 with a nova kit using a kjw g27 donor gun,but its too stiff on first cocking, if I dont pull the trigger it cocks ok, but if I cock it and pull the trigger its hard to cock again,so its the wheel or the hammer thats provides too much resistance, replaced the wheel with a 6mm bearing but it still vents after the first shot, should I use a weaker hammer spring?

[@CJAwesome83]

Hrmmm. Not too good with those specific issues but yeah, sounds like you should try a softer hammer spring in it. Because when the pistol fires and it blows back, if it does not have enough force to blow the slide all the way back it will not trip the valve reset knocker which will leave the magazine valve open and vent all the gas. You could also possibly try a weaker recoil spring but that will impact the overall feel and snappiness of the pistol so that would be my second choice.

[@georgecurtis1302]

Thanks so much, great video!!! +1 sub ;)

[@mitsukiiiiiiiiiiiiiiiiiiiiiiii]

15:20 I can't get this part down my gun also came with an extended slide catch

[@mitsukiiiiiiiiiiiiiiiiiiiiiiii]

the spring won't stay in place

[@rangi.marsden8585]

can you do this but for the m&p 9? my mag release fell out and its different to yours

[@CJAwesome83]

Sorry, I don't have an M&P at the moment.

[@dylancarter3776]

My glock 18c mag release spring came out so did my mag release can I have a tutorial on how to

[@CJAwesome83]

What you are asking for is covered in the video you made this comment on :p

[@julianrivera2536]

Hey I’m having a problem. My Glock no longer cycles fully and I’ve replaced the hammer spring twice now 140% and 120% I’m staring to suspect my hammer sear spring is messed up and that’s the reason why but idk how to test this without ordering parts from Japan

[@CJAwesome83]

Don't think you can test that theory without extra parts. However, one other thing it could be is a worn magazine catch, meaning the magazine is not seating fully up against the nozzle, meaning too much gas escapes when firing, and not being powerful enough to cycle the slide fully.
Try gently pushing the magazine up in the frame when firing and see if that helps, if yes, you need a new magazine catch button.

[@julianrivera2536]

@@CJAwesome83 I finally found my issue, I use a aps nozzle with the DP light weight bbu because its looser inside the bbu removing a point of wear that used to mess up my cycling for a long time when I had a GA nozzle and it works perfect with the Poseidon ice pix ice breaker piston head and flute valve setup I have but there’s one thing, it uses a single pin to hold the flute valve in rather then the regular nozzle setup. I ended up finding it have become loose and the flute valve no longer fully closed. I glued it with a tiny drop of jbweld and it all worked again!! Also yes the mag is seating nicely for now but thanks for the heads up when it will happen! Glad my Glock works!

[@mattivirta]

can WE glock 19 or 19x change mag release button left to right, i use gun left hand.

[@CJAwesome83]

No. The WE magazines are not cut on the right hand side to allow for a reversed magazine release to work.

[@LottaMiataz]

Have a WE g19 And got a whole new assembly and Did this but when I Put in the Assembly and test Trigger, it will not fire, am I Not lining up the Trigger bar correctly?

[@CJAwesome83]

If you just assembled the frame and not put the slide on, press down on the two tabs on each side of the trigger housing to reset the trigger/hammer. I.e. push down the trigger bar tab and the valve reset knocker tab.

[@neider1]

Thanks, helped me a lot on the slide catch spring
Do you also know if the trigger spring can be upgraded?

[@CJAwesome83]

+Generation Nuke No problem man! Glad it was helpful!
Do you mean the spring between the trigger bar and the inside frame, or which spring?

[@neider1]

Yes that one, so i can feel more resistance and it snaps back faster. got the WE G17 Force so trigger travel is already short but the reset is not that great. Sometimes i have to help it (user error on the spring caused this)

[@CJAwesome83]

+Generation Nuke I see. Then the answer is No-ish... :p
There are "reinforced" spring kits for the TM/WE Glocks that have that spring but I doubt they will give you what you are looking for. Sorry.

[@neider1]

+Non Existent no-ish... guess that means modification time

[@Brad87257]

Thank youuuuuu!

[@CJAwesome83]

You're welcome :D

[@sgtcaco]

I’m going insane step 2.5 hours . Still going, mine doesn’t just slip in.

[@CJAwesome83]

Take a break, step away from the parts. Do something else and come back to it and try it again :-)

[@Epilogue_x]

This is not a WE G19 right? I noticed the fully traded slide lol.

[@CJAwesome83]

+Zhehan Xiong Actually it is. I got it with full markings from KIC Taiwan. It's the "HK3P" version of the WE Glock 19, with full markings.

[@Epilogue_x]

Thanks for the info, I totally forgot about this info. Just another quick question. For your Stark Arms G19, Do u have the problem that the slide doesn't lock back for empty chamber when using WE mags? Love your videos, keep up the good work!

[@CJAwesome83]

+Zhehan Xiong Haven't tried my WE Glock 19 magazines in the stark very much to be honest. I have plently Stark Glock 19 magazines for my Stark :p

[@james1980bad]

謝謝

[@CJAwesome83]

没问题 :-D

[@doctormclovin2634]

Non Existent hey and thank you for the awesome vids!!! Can you point me to a site with upgrades for a KJW Glock 23?

[@CJAwesome83]

Thanks man! :D
Yep, I recommend Rainbow8 for upgrades for KJW Glocks : www.rainbow8.com/

[@user-iy7eb8ht9v]

how to slide catch?

[@CJAwesome83]

Sorry I do not understand :(

[@sgtcaco]

My fingers to big for this been a bout 4 hours on the first step.

[@CJAwesome83]

Sorry to hear that man. I have the opposite as you can tell, multiple commenters have referred to me as "bitch hands" :-p
Take your time and go slow.

[@sgtcaco]

@@CJAwesome83 yeh I had finally found a very unconventional way of doing this step by putting it on a table at a certain angle and forcing it in with body wait. I remember it was a painful ordeal.

[@geraldwiedemann2126]

22:00

[@sgtcaco]

F …you we Tech I got it . I have my own technique now, it’s called using my body weight to put pressure on it . Halaluya

[@CJAwesome83]

Awesome! :-D

[@sgtcaco]

@@CJAwesome83 oh dude, that was a painful experience, I think because my block is new , the spring was very tight and the part is a tiny bit different. I just couldn’t hold it there under pressure with my fat fingers. So I finally worked out that if I got it kind of in place then flip it up side down on a table and put a screw driver on top of that part, I could then push down on it with more pressure. I was so happy once I had it in there.
Thanks for your tutorial mate, it helped a lot and would have been impossible if I had to include that center part at the same time.