This worked on my 2013 Focus. The remote stoped working after I replaced the battery a year ago. Thanks for sharing. Saved me $140.00 Thats what the dealership wanted to charge. P.S. yes it took 2 trys.
Thanks so much for this video. Saved me a trip back to the dealer for my “new to me” 2018 Edge Titanium. The settings menu is different in these later models, however the remote/start button reset did the trick. Thanks again and Be Safe.
2012 Ford Edge SEL 2.0L Ecoboost. I took delivery of this used car 18 mos ago. The dealer couldn't get the remote starter to work and with summer coming it wasn't high on my priority list. Finally I got the remote start to work by watching this video. In Vehicle Settings the remote start was enabled. So I followed Step 2 of his instructions and VOILA it worked on the first try :) Thanks a million to ADD is multitasking
... and I have to add that it will not work if and when the engine wrench light comes on. It no doubt is a protection so as not to create further issues.
Wow thanks a ton! I have a 2015 explorer, and never use this feature. I remember when I bought the car, the sales person showed me this feature. Ok….but I never use it…fast forward to this year.winter in Montana, I watch my son in-law remote start his car and let it warm up before his drive to work -8 deg f ….hey wait a min…I can do that too..I think….well everything I did would not work, so I searched for this problem on TH-cam ..and I found your channel……you saved the day…..I had to rewind and play a few times to see how you pushed the buttons but it was then that I saw what you did : 1. You locked and beeped the car, 2 you hit the start 2x 3. You locked the car again 4. You hit the start button 2x again and it started…..I never….ever would have done this….but i did exactly what you did and amazingly…….at 10 deg f… it started right up!….man…you are an American hero :)
Of everything I looked at in the internet, this video was the only thing that mentioned three part about syncing while starting the car and that's what worked.. thanks!!
Great video... my girlfriend had her windshield replaced and they had to reprogram the sensors and recalibrate the car.....somehow that disabled the remote start. Starting the car and holding the remote start worked.... Thanks Again for the video !!!!
Beautiful it was the (settings) that I had unchecked the other day oops forgot (re checked) it and boom good to go saved me an early morning appointment thanks for your time ps 2018 worked the same
Thanks for the video as this reset worked on my 2019 FLEX the 1st time. The remote start stopped working after my vehicle was removed from the Ford Pass app. Thanks again!
@@addismultitasking3504hi, does it also work for 2008 ford explorer 4.0, after changing the transmission the alarm completely stop working, i bought a 4 button remote it works with but the original remote which has the remote start is not working at all. What should I do
Thanks my second hand 2016 ford fusion that I just bought would always flash red light and sometimes start and sometimes not. Sure enough second time in the car holding the start key like you show worked like a charm. Now it always flashes green. I think it is from the car being on a lot for a few years without being started. Just in case though I am replacing the battery as well
Thanks so much. Just picked up a 2019 F150, remote start wouldn't work. Your advice on syncing the remote by holding the button on the fob for 10 seconds after starting the truck did the trick.
I did the last step which was start 2x, lock, start 2x on my 2013 ford escape, it worked. Thank you so much!! Any advice on how tho get the fob to work with only pressing auto start 2x?
2018 ford escape . the remote start stopped working all of a sudden. I have done all the steps you mentioned, unfortunately it did not work. Is there any other suggestion you might have? Thanks
I have a fusion where you hit lock then hit it twice within 2 seconds to make the remote start work. How do you reset THAT kind? I don't have a actual remote start button.
I have a 2012 Edge SEL 3.5 with the dual analog gauges and key entry start. Not the keyless entry like this one. So I was skeptical. But It f**kin worked!! After a year of trying to figure this out. My remote start works now. I thought there was no way the brake pedal, starting and holding the button for 10 seconds is going to work. It did.
10 second deal does not work on mine. My 13 taurus horn goes off a few extra times after closing the door whether i hit lock or not. Ill try disconnecting the battery tomorrow for a reset.
My key fobs work, but are finicky. Example...i get out of the car and hit the lock button. Sometimes it works, but sometimes i have to move around outside the car to get it to work. Will this programming fix this? BTW, i have replaced the batteries in both keyfobs already with the same result.
So I had this problem recently. Took my 2016 Ford Edge to the same Ford dealer where I bought it. Called me back to tell me that it needed a new battery and to reprogram the vehicle. Being a person who doesn't know nothing about cars, I told them to go ahead thinking it was gonna solve the problem. It didn't. So I asked what can I do. Girl told me that the key needs to be reprogrammed for about $145. At the same time, when I opened the driver door, I kept getting the "door ajar" signal. NONE of that got fixed and charged me $303.05 for it. Watching this video, not only I fixed the remote start on BOTH keys, but the "door ajar" signal went away. I will be going back tomorrow to have a serious conversation with the manager and to ask for my money back. And if you are reading this: 1.Remote key DO NOT need to get reprogram, it's a lie 2. Cars DO NOT need to be reprogram when replacing the battery. Car dealers are a bunch of rip-offs.
I've heard that same story a couple times dealers just think that everybody's stupid and they charge whatever they want... I'm glad the video helped you... By the way I don't call them dealers I call them Stealers
@@addismultitasking3504 Update: I want to share this FYI. So I used your last recommendation and it worked. However, next morning went back to bad. I noticed that when I opened only the driver door, immediately I will hear the "door ajar signal" or the ding-ding-ding. So I talked to the dealer and told me to bring it back. When I got in this morning, I got the ding-ding-ding. As soon as I get to the dealer and got out, I didn't hear nothing. Tried the remote start and started right away. Crazy. Anyways, they put it throughout all kinds of computers and found nothing. The theory is, there was probably some type of condensation on some of the harness. Not sure. But I live in CT and was cold and snowing this morning so I blasted the heat in the car. Maybe that evaporated the condensation. Still a mystery.
Thank you, that remote 10 second hold procedure did the trick on the First try! Saved us a trip to the dealership. BTW I have the twin to your Edge and really love it.
I didnt even make it thru the video, but saw several people mention holding it for ten seconds... i did none of the other steps, just held the button for ten seconds and it fixes it
Leaving this for anyone who this method did not work: 2016 Explorer, this did nothing, in the end I disconnected the battery for 20 minutes which forced everything to reinitialize and now it works again.
I brought used ford, remote start was not working. Do foult code readind, if the car has B1492 foult, that meens your car has acsident, you need to do crash memory reset at local service ant remote will works
![[TH] 2024 PMWC x EWC Group Stage Day 3 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/VnOqutfqWqU/mqdefault.jpg)
This worked on my 2013 Focus. The remote stoped working after I replaced the battery a year ago. Thanks for sharing. Saved me $140.00 Thats what the dealership wanted to charge. P.S. yes it took 2 trys.
glad it helped
This reset still worked on our 2019 model Escape after second try! 😃 Thanks soo much! Your were very helpful:)
Good to hear
Thanks so much for this video. Saved me a trip back to the dealer for my “new to me” 2018 Edge Titanium. The settings menu is different in these later models, however the remote/start button reset did the trick. Thanks again and Be Safe.
glad I could help
2012 Ford Edge SEL 2.0L Ecoboost. I took delivery of this used car 18 mos ago. The dealer couldn't get the remote starter to work and with summer coming it wasn't high on my priority list. Finally I got the remote start to work by watching this video. In Vehicle Settings the remote start was enabled. So I followed Step 2 of his instructions and VOILA it worked on the first try :) Thanks a million to ADD is multitasking
It's good to hear it worked for you have a good rest of the day
... and I have to add that it will not work if and when the engine wrench light comes on. It no doubt is a protection so as not to create further issues.
Thank you so much!!!! I had to hold it down for 10 seconds and it worked on the first try!
Glad it helped!
Wow thanks a ton! I have a 2015 explorer, and never use this feature. I remember when I bought the car, the sales person showed me this feature. Ok….but I never use it…fast forward to this year.winter in Montana, I watch my son in-law remote start his car and let it warm up before his drive to work -8 deg f ….hey wait a min…I can do that too..I think….well everything I did would not work, so I searched for this problem on TH-cam ..and I found your channel……you saved the day…..I had to rewind and play a few times to see how you pushed the buttons but it was then that I saw what you did : 1. You locked and beeped the car, 2 you hit the start 2x 3. You locked the car again 4. You hit the start button 2x again and it started…..I never….ever would have done this….but i did exactly what you did and amazingly…….at 10 deg f… it started right up!….man…you are an American hero :)
Best, most helpful video ever! I used the last one starting and pressing the button immediately after. Worked 1st time! Fantastic thank you!!
awesome
It worked for me, thanks a lot!
Worked second try on my edge your the best !
Glad I could help
Of everything I looked at in the internet, this video was the only thing that mentioned three part about syncing while starting the car and that's what worked.. thanks!!
Glad it helped!
Great video... my girlfriend had her windshield replaced and they had to reprogram the sensors and recalibrate the car.....somehow that disabled the remote start. Starting the car and holding the remote start worked.... Thanks Again for the video !!!!
Thanks for watching have a good day
Thankyou. This worked immediately. It was super simple
Glad it helped!
It works for mine 2014 Ford explorer sport. Thank for sharing !
You're welcome!
I have a Ford Flex 2019, Thank you, When I held the remote start button for 10 seconds it worked, THANK YOU !!!!…🙏👍👍👍😁
glad it helped
Worked on the second try on my 2013 Explorer, thanks for the video.
Glad it helped
Thanks so much, i have a second hand 2017 ford fusion a month ago and never cant be run With a distance remote, but with your video help me a lot
Glad I could help have a good day
Obp u
Awesome, the start engine hold remote start button fixed it for me. Thanks!
glad it helped
It worked for my 2019 model, thank you so much, brother, man!
You're welcome!
Beautiful it was the (settings) that I had unchecked the other day oops forgot (re checked) it and boom good to go saved me an early morning appointment thanks for your time ps 2018 worked the same
Good to hear
thanks! It helped me getting my remote start to work.
glad it helped have a good day
This helped I had the check engine light on. Thanks!
Glad it helped
Thank you so much man it worked for my ford explorer 2013
awesome
Thanks helped a lot it works now
I'm glad it helped you have a good day
Thanks for the video as this reset worked on my 2019 FLEX the 1st time. The remote start stopped working after my vehicle was removed from the Ford Pass app. Thanks again!
Thanks for watching have a good day
@@addismultitasking3504hi, does it also work for 2008 ford explorer 4.0, after changing the transmission the alarm completely stop working, i bought a 4 button remote it works with but the original remote which has the remote start is not working at all. What should I do
Thanks a lot.
It worked for me
You're welcome!
thanks. it worked like a charm!
Glad I could help
@@addismultitasking3504 I have a 2013 Ford Taurus remote start doesn’t work the check engine light is on any help please
Thanks my second hand 2016 ford fusion that I just bought would always flash red light and sometimes start and sometimes not. Sure enough second time in the car holding the start key like you show worked like a charm. Now it always flashes green. I think it is from the car being on a lot for a few years without being started. Just in case though I am replacing the battery as well
Im glad the video helped, have a good weekend
Thanks so much. Just picked up a 2019 F150, remote start wouldn't work. Your advice on syncing the remote by holding the button on the fob for 10 seconds after starting the truck did the trick.
Glad it helped
I did the last step which was start 2x, lock, start 2x on my 2013 ford escape, it worked. Thank you so much!! Any advice on how tho get the fob to work with only pressing auto start 2x?
Thank you! 🤜🤛 🙂
Glad I could help have a good weekend
Thank you took 3 times on 2013 explorer worked well
nice!!
Do you have a video for a 2013 f150 remote start not working?
What buttons do you use to put the windows up with this smart key fob?
Whats the bottom next to the hazard light botfom for it has a 🔐 sign
Thank you so much it works at the first time
2018 ford escape . the remote start stopped working all of a sudden. I have done all the steps you mentioned, unfortunately it did not work. Is there any other suggestion you might have? Thanks
Very good ty
thanks, have a good weekend
Hi can u roll down power windows with fob key i havw ford edge 2012 i have tried many options buts its not woking
I have a fusion where you hit lock then hit it twice within 2 seconds to make the remote start work. How do you reset THAT kind? I don't have a actual remote start button.
2019 Ford Flex.
No enable settings but
Turn System off and back on again and you're in business.
When your 2015 Ford escape do not start car from the remote key what is the problem
Reset works for 2019 as well
how to reset
I have a 2012 Edge SEL 3.5 with the dual analog gauges and key entry start. Not the keyless entry like this one. So I was skeptical. But It f**kin worked!! After a year of trying to figure this out. My remote start works now. I thought there was no way the brake pedal, starting and holding the button for 10 seconds is going to work. It did.
Glad it helped, have a good one
10 second deal does not work on mine. My 13 taurus horn goes off a few extra times after closing the door whether i hit lock or not. Ill try disconnecting the battery tomorrow for a reset.
My key fobs work, but are finicky. Example...i get out of the car and hit the lock button. Sometimes it works, but sometimes i have to move around outside the car to get it to work. Will this programming fix this? BTW, i have replaced the batteries in both keyfobs already with the same result.
I dont think it will make a difference,but I wont hurt to try
@@addismultitasking3504 OK. Thanks for the reply.
So I had this problem recently. Took my 2016 Ford Edge to the same Ford dealer where I bought it. Called me back to tell me that it needed a new battery and to reprogram the vehicle. Being a person who doesn't know nothing about cars, I told them to go ahead thinking it was gonna solve the problem. It didn't. So I asked what can I do. Girl told me that the key needs to be reprogrammed for about $145. At the same time, when I opened the driver door, I kept getting the "door ajar" signal. NONE of that got fixed and charged me $303.05 for it. Watching this video, not only I fixed the remote start on BOTH keys, but the "door ajar" signal went away. I will be going back tomorrow to have a serious conversation with the manager and to ask for my money back.
And if you are reading this: 1.Remote key DO NOT need to get reprogram, it's a lie 2. Cars DO NOT need to be reprogram when replacing the battery. Car dealers are a bunch of rip-offs.
I've heard that same story a couple times dealers just think that everybody's stupid and they charge whatever they want... I'm glad the video helped you... By the way I don't call them dealers I call them Stealers
@@addismultitasking3504 Update: I want to share this FYI. So I used your last recommendation and it worked. However, next morning went back to bad. I noticed that when I opened only the driver door, immediately I will hear the "door ajar signal" or the ding-ding-ding. So I talked to the dealer and told me to bring it back. When I got in this morning, I got the ding-ding-ding. As soon as I get to the dealer and got out, I didn't hear nothing. Tried the remote start and started right away. Crazy. Anyways, they put it throughout all kinds of computers and found nothing. The theory is, there was probably some type of condensation on some of the harness. Not sure. But I live in CT and was cold and snowing this morning so I blasted the heat in the car. Maybe that evaporated the condensation. Still a mystery.
Thank you, that remote 10 second hold procedure did the trick on the First try! Saved us a trip to the dealership. BTW I have the twin to your Edge and really love it.
Glad it helped, thanks for watching
Fusion?
Will it work on ford edge 2013
Give it a try
@@addismultitasking3504 tried. It's not working :(
Wouldn't it make more sense to check if its enabled before you start testing 40 fuses??? Like any surgery... least invasive option first!
I used to buy and sell cars and almost every one of them would have a blown fuse somewhere.. it's always good to check all of your fuses
I didnt even make it thru the video, but saw several people mention holding it for ten seconds... i did none of the other steps, just held the button for ten seconds and it fixes it
🎉
Leaving this for anyone who this method did not work:
2016 Explorer, this did nothing, in the end I disconnected the battery for 20 minutes which forced everything to reinitialize and now it works again.
I brought used ford, remote start was not working. Do foult code readind, if the car has B1492 foult, that meens your car has acsident, you need to do crash memory reset at local service ant remote will works