I have the same Puch with almost all the same parts as on the video but instead of a ''circuit'' exhaust or ''krulpijp'' as we call them here in the Netherlands I put a Homoet 6p on it so it is more quiet. nice video love these old mopeds especially Puch Maxi , Macho, N , 2 speed
i am really amazed that this puch was able to reach 32 mph with nearly stock setup omg :)) my puch did first reach those 32mph when i put on airsal cylinder kit and sport exhaust and air filter, 15mm carb, so i am really amazed about the stock topspeed , must be a really good stock cylinder kit and a really well adjusted carb you had on it :)) greetings from denmark , hoping to see more videos with this moped in future :)
emiholm7 I am definitely going to make more videos with it soon hopefully. I’m thinking it helped that it didn’t have the stock air box on it, so maybe the extra air flow and adjusted carb helped it reach a faster top speed
My Puch did 55 mph. A delorto carb and sprocket changes along with a cut down chamber exhaust. Remove front fender, remove pedals, cut rear fender, cafe z bars, remove gasket between jug and head to increase compression. Bad ass.
Good job! I love your guy's project! It's hard to find one around here (usa) thats in that great of condition. i got contacts in the Netherlands but they don't want to ship parts. wish this kind of moped was more available :)
I used a 1mm base gasket my puch 70cc runs the best use a 15mm intake and 15mm bing runs realy good but they won't last running them wide open i usely run mine around 30mph or 32mm
Which kit did you purchase very interested in 70cc for my maxi it only does 23 or so but only has 955 original miles so I'm completely rebuilding it and would love to know which kit don't want one where I have to bore the casing and just interested in learning a bit more if you could get back to me and maybe offer some advice it'd be greatly appreciated. Ps sorry for such a paragraph
www.treatland.tv/puch-70cc-cylinder-treat-kit-p/puch-treat-kit-70cc-the-people.htm Something like this man, I bought mine a couple years ago so I’m not sure if it is the same. I didn’t bore anything out I just bolted mine on
See I've been looking on treatment they had that 80cc kit but that required case boring now that I know they sell the bolt on kits though it's definitely getting upgraded thanks man I'm gonna look for that proma too thing sounds and looks great
Did you follow a guide or instructions anywhere for the install? Can't find any online and want to pull trig on the treatland 70cc kit. Where'd you get your kit?
th-cam.com/video/bry8nRoub6A/w-d-xo.html I watched the video above, also look up the channel n1bpd. He has really good old videos that are all super in depth about his 70cc kit he did. He installed it very professionally but I watched his videos alot to understand how it all works. Also the reason why I didnt do a speed test after the kit was installed in the video is because I cant get it to run right. Either the jetting or timing is off and now after messing with the timing I cant get spark out of the ignition. Hopefully soon I can get it running correctly
Do you think that Americans know the german language? No, so don't write in german... And btw, 12mm carburetor works perfect on 70cc and is still manageable to 45-50 mph depending on your weight. I have a Puch with 70cc airsal and 10mm Bing and it works great, you just need to jet up and make sure not to run lean.
@@yann1ck318 yes there is.. the German Maxi 25kmh is with 10mm i believe. And if not, in Denmark we have several mopeds from the 60's with 10mm bing;-) Kreidler Superstar 2-speed is also with 10mm Bing.
*Sounds like engine is 'fuel-starved' as throttle is increased...maybe increase jet-sizes or ream the jet on it now gradually up until it revs properly...there's a guy who's an 'Ace' on scooter carbs here on 'Tube called 'Rollin' Wrench'...he used to do plenty of mechanical work...now mainly just sells stuff* ( *That exhaust is just so loud I couldn't go two-blocks with it...my '08 'Metro' is dead-quite and will top-end at 42/43mph w/a stock-engine & exhaust & I'm 225lbs.! I have performance-parts like Pollini variator/Malossi roller-weights/Kevlar CVT/and run 10/40 full-synthetic and run 27psi rear/18psi front on 'IRT' tires and the Honda handles like a 'mountain goat' no matter the outside temps* ) *I love mopeds...but they don't love me! I'm just too damn fat for them to cope with!*
*I'm not knowledgeable on 2-strokers all that much...but I understand the principles involved in fuel-feedsystems and 'timing'...I'm assuming you had the problem(s) resolved a long time ago, but what was it?*
I was sadly never able to get a true top speed on it because I couldnt get it to run right. there will be more moped videos in the future working on it and hopefully making it run super nice
Please for the love of god get a suitable carburator and a different exhaust and maybe a cylinder head like thing (thats what google translate did to Zylinderkopfdichtung from german to english) A Tecno Boss would be suitable and maybe even a hpi electronis ignition system for more power and up to 14500 rpm not kidding
Two Stroke J lol i just got a used Tecno Bos exhaust for only 30 bucks maybe try getting one from switzerland or germany :here are some recommended sites( idk if they ship to the us ) www.moafkult.ch , www.puchshop.de , www.scootertuning.com i bought from all of them and they are really good Ma exhaust came from an instagram mechanic shop that sells mostly used moped pieces maybe try one of them if the websites dont ship to us
Hey! Im from switzerland and i would like to send you some really special swiss made tuning parts, since theyre road legal over there ;) can we get in touch?
just some info for u guys please upgrade the carb take a 16mm sha dellorto with jets 6mm diameter and the size maybe a set from 106 to 120 or so good video tho and please for the love of got dont destroy the rims theire originall and worth alot Kind Regard online stranger
Two Stroke J yeah its a good idea and they have really good quality you just need to make sure u get the right diameter jets there are 5 and 6 mm diameter jets for sha‘s so get some info and them buy the things needed
Damn thats fast. I am looking into upgrading the carb and the whole ignition system soon. Im just worried I will buy it all and then not be able to make it work
1:30 There are two types of people in this world: “What’s up, TH-cam!” & “Get that off me.” 😂
So true lmao
"Which way does it go?"
"On" -Johnson
really enjoyed this vid as a guy that lives in sweden and like only ride old mopeds
I wish more people here rode mopeds
@@TwoStrokeJ in sweden almost every 15 year old ride a moped and my dad and his friends has a moped club in our town. every town has a club tbh
@@zateleroy5754 kk
MT5 gang!(sweden)
When you add more flow and displacement you have to re jet the carb 😁
When I was riding mopeds 1978 - I would of killed for that rig. No one had anything like that.
scott moore it’s definitely an amazing bike. Going to be working on it more soon
I have the same Puch with almost all the same parts as on the video but instead of a ''circuit'' exhaust or ''krulpijp'' as we call them here in the Netherlands I put a Homoet 6p on it so it is more quiet. nice video love these old mopeds especially Puch Maxi , Macho, N , 2 speed
Wat voor carb zit er op bij jou en wat is je topsnelheid?
Upgrade that carb
i am really amazed that this puch was able to reach 32 mph with nearly stock setup omg :)) my puch did first reach those 32mph when i put on airsal cylinder kit and sport exhaust and air filter, 15mm carb, so i am really amazed about the stock topspeed , must be a really good stock cylinder kit and a really well adjusted carb you had on it :)) greetings from denmark , hoping to see more videos with this moped in future :)
emiholm7 I am definitely going to make more videos with it soon hopefully. I’m thinking it helped that it didn’t have the stock air box on it, so maybe the extra air flow and adjusted carb helped it reach a faster top speed
it was probably fromn austria wich are able to drive 45 from stock and with a hole in the airfilter at least 50 kmh
Two Stroke J looking forward to it :))
Lenny_ 1638 but they are still made special for the us in austria :)) but i dont know what moped laws are in the us :))
32 is nothing ground-breaking for these bikes. My 100% fully stock puch maxi ii goes 32 as a default. 0 modifications.
My Puch did 55 mph. A delorto carb and sprocket changes along with a cut down chamber exhaust. Remove front fender, remove pedals, cut rear fender, cafe z bars, remove gasket between jug and head to increase compression. Bad ass.
Grant is easily the best part if this video
I love this.
after watching your latest video, I came to this video and this is also an awesome video bro
hahaha this video is a classic!!!
Now that's a gaggle of guys I gander!
you deserve the goosing you're gonna get
Good job! I love your guy's project! It's hard to find one around here (usa) thats in that great of condition. i got contacts in the Netherlands but they don't want to ship parts. wish this kind of moped was more available :)
contact is puchshop.de i know the owner personally lol.
yea man they are great mopeds!
@@TwoStrokeJ Ya'll should do a Puch engine under a tomos A35 frame. It's some fun results!
how much do they sell for in your country?
Can you drive throughout Usa with this moped with the same driving licence category from Ohio? Thanks.
I used a 1mm base gasket my puch 70cc runs the best use a 15mm intake and 15mm bing runs realy good but they won't last running them wide open i usely run mine around 30mph or 32mm
I'm from Brazil where I can get a 70cc kit from this one to buy.congratulations for the work done, thank you already
max moreira thanks man, I’m gunna be posting more videos of this moped soon, still got a lot of work to do on it
@@TwoStrokeJ be happy
Do you got a big enough wrench for those 10 mm nuts hahaha. Just got the same bike. I need info on what to put on it. I want it to go 40
did they have to change any timing?
No speed run for the 70cc kit?
What bbk kit did you use
Now this is quality content
thats what IM SAYING!!
@@TwoStrokeJ that thing is legitimately awesome
Nice moped! My dad has one
Which kit did you purchase very interested in 70cc for my maxi it only does 23 or so but only has 955 original miles so I'm completely rebuilding it and would love to know which kit don't want one where I have to bore the casing and just interested in learning a bit more if you could get back to me and maybe offer some advice it'd be greatly appreciated. Ps sorry for such a paragraph
www.treatland.tv/puch-70cc-cylinder-treat-kit-p/puch-treat-kit-70cc-the-people.htm
Something like this man, I bought mine a couple years ago so I’m not sure if it is the same. I didn’t bore anything out I just bolted mine on
See I've been looking on treatment they had that 80cc kit but that required case boring now that I know they sell the bolt on kits though it's definitely getting upgraded thanks man I'm gonna look for that proma too thing sounds and looks great
that scoot life!
Damn you went on a nice tour of the channel hahaha thanks!!
Did you follow a guide or instructions anywhere for the install? Can't find any online and want to pull trig on the treatland 70cc kit. Where'd you get your kit?
Bailey T. Miclette only followed some TH-cam videos I found. Got the k-star kit from the treatland website
@@TwoStrokeJ Could you link me to them i cant find any anywhere haha. Also what was your top speed after the upgrade?
th-cam.com/video/bry8nRoub6A/w-d-xo.html
I watched the video above, also look up the channel n1bpd. He has really good old videos that are all super in depth about his 70cc kit he did. He installed it very professionally but I watched his videos alot to understand how it all works. Also the reason why I didnt do a speed test after the kit was installed in the video is because I cant get it to run right. Either the jetting or timing is off and now after messing with the timing I cant get spark out of the ignition. Hopefully soon I can get it running correctly
Forgot to mention i learned a ton off the moped army forums as well :)
I learned how to mess with the ignition on ouch’s and other old school 50cc peds. Do you know the cigarette paper technique?
finally most of youtubers that make mopehead vids are just pictures whit text
Appreciate it man! Soon the moped videos will come back, stay tuned
Quality
Wie viel mm?
nice video
Excellent
Thanks brother!!!
Did you also change for the 70ccm the crankshaft?
Its important to adjust the ignition :)
I have been messing around with the ignition since the video was filmed. Still trying to get it perfect. Thanks for the info!
Pipe sounds great lol
thanks haha
Der reso funktioniert doch nicht beim 12er vergaser! Minimum 16 rede aus erfahrung
Was redest du? Sie haben keinen 12mm Vergaser, und auch kit 12mm Vergaser kann man mit dem Auspuff in den Reso kommen.
Do you think that Americans know the german language? No, so don't write in german... And btw, 12mm carburetor works perfect on 70cc and is still manageable to 45-50 mph depending on your weight. I have a Puch with 70cc airsal and 10mm Bing and it works great, you just need to jet up and make sure not to run lean.
@@-kutsogolera-6183 yeah but fuel/oil mix is also for cooling the cylinder down und to not create too much tension
- Kutsogolera - there’s no 10mm bing 😚 and no a 12mm carb is the worst that you can put on a 70ccm all
@@yann1ck318 yes there is.. the German Maxi 25kmh is with 10mm i believe. And if not, in Denmark we have several mopeds from the 60's with 10mm bing;-) Kreidler Superstar 2-speed is also with 10mm Bing.
How fast are they allowed to drive in America?
I want to say mopeds are not supposed to be able to go over 35 mph or something like that. Ive never had issues with going over that though
*Sounds like engine is 'fuel-starved' as throttle is increased...maybe increase jet-sizes or ream the jet on it now gradually up until it revs properly...there's a guy who's an 'Ace' on scooter carbs here on 'Tube called 'Rollin' Wrench'...he used to do plenty of mechanical work...now mainly just sells stuff* ( *That exhaust is just so loud I couldn't go two-blocks with it...my '08 'Metro' is dead-quite and will top-end at 42/43mph w/a stock-engine & exhaust & I'm 225lbs.! I have performance-parts like Pollini variator/Malossi roller-weights/Kevlar CVT/and run 10/40 full-synthetic and run 27psi rear/18psi front on 'IRT' tires and the Honda handles like a 'mountain goat' no matter the outside temps* ) *I love mopeds...but they don't love me! I'm just too damn fat for them to cope with!*
hahaha Thanks for the info man! Its hard to find poeple who are knowledgeable so Im sure this info will help me!
*I'm not knowledgeable on 2-strokers all that much...but I understand the principles involved in fuel-feedsystems and 'timing'...I'm assuming you had the problem(s) resolved a long time ago, but what was it?*
where did you buy that cc?? i want to do it with mine
treatland.tv
What kind of 70cc kit do you have on it. (brand name) ?
It’s the kit treatland.tv makes
@@TwoStrokeJ thanks
Yes You need make a Port timing work
How you get a moped in the US?????
They are for sale everywhere!
Pretty damn hard to find any moped there for me I don’t even know where to look
Is that a miata
2:50 when the boss is looking
what is the exhaust called??
Proma
whats the speed with 70cc
I was sadly never able to get a true top speed on it because I couldnt get it to run right. there will be more moped videos in the future working on it and hopefully making it run super nice
@@TwoStrokeJ I can help u if u want i got one myself also with a 70 cc
I would suggest changing out the jets? See if its running lean
Fuckin gnarly
hell yea
Please for the love of god get a suitable carburator and a different exhaust and maybe a cylinder head like thing (thats what google translate did to Zylinderkopfdichtung from german to english)
A Tecno Boss would be suitable and maybe even a hpi electronis ignition system for more power and up to 14500 rpm not kidding
I plan on building it better in the future, but right now I cant afford it haha
Two Stroke J lol i just got a used Tecno Bos exhaust for only 30 bucks maybe try getting one from switzerland or germany :here are some recommended sites( idk if they ship to the us ) www.moafkult.ch , www.puchshop.de , www.scootertuning.com i bought from all of them and they are really good
Ma exhaust came from an instagram mechanic shop that sells mostly used moped pieces
maybe try one of them if the websites dont ship to us
Hey! Im from switzerland and i would like to send you some really special swiss made tuning parts, since theyre road legal over there ;) can we get in touch?
absolutely! That sounds amazing, you should DM me on my instagram @twostrokej and we can talk more
In the netherllands are Mopeds very nice and populaire
bro better tighten up that chain
Done a lot to it since this video gava
just some info for u guys please upgrade the carb take a 16mm sha dellorto with jets 6mm diameter and the size maybe a set from 106 to 120 or so good video tho and please for the love of got dont destroy the rims theire originall and worth alot Kind Regard online stranger
Lenny_ 1638 thanks for the info guy! I’ve been looking at those sha dellortos for a while. Might have to pick up one
Two Stroke J yeah its a good idea and they have really good quality you just need to make sure u get the right diameter jets there are 5 and 6 mm diameter jets for sha‘s so get some info and them buy the things needed
Where You live is look like Avon lake i live for 11 years un Cleveland Ohio i wan come back but o go whit My motor bike in the airplane 🤣
the carburetor ist too little my puch maxi is running 80mph (Gilardoni+26mm Carburetor )with very sharp acceleration and my puch monza is much faster
Damn thats fast. I am looking into upgrading the carb and the whole ignition system soon. Im just worried I will buy it all and then not be able to make it work
@@TwoStrokeJ he probably means 80 kmh 80 mph would be faster than possible without it literally breaking
Lenny_ 1638 one of my friends had one that went 120kmh, he just had to reinforce the frame
Rip puch Macau luxe
No worries its still alive
فيديو رائع لكن صوت المحرك فيه خلل في الاخير
كم تبيعها بالعملة الجزائرية 😄😃😅
SHRAWI HDZ 01 صحراوي أش ديزاد أدرار I totally agree my guy! Thanks for the input!
I like your video except for all the icky camera angles and close ups.
Why does everyone feel that they have to be a clown when on camera?
To cheer your day up cuz you seem sad 😞
@@TwoStrokeJ Well, thats a very good reason.
That one guys uggy eeeuuuuuu
LMAO i have a mopped aprillia sx 50cc stage 6
Im jealous
@@TwoStrokeJ I hope that was sarcastic I rather have that sicc puch than a scooter everyday bro
💩👍🏽💋❤️❤️❤️❤️❤️😍🥰
How to ruin a 70cc kit😅😅