4 Wheel Steer "TANGO" goes TWIN BRUSHLESS - TEKIN POWER! | RC ADVENTURES
ฝัง
- เผยแพร่เมื่อ 17 ก.ค. 2019
- With the full size "FORD RIVIAN R1T" being built - we are NOW ABLE TO RUN MOA in Class 4! Ever since inception, Tango was always intended to be Dual Brushless. And today, this dream comes alive. I have with me 2 RX4's from Team Tekin. Also with me are Dual 3100kv Brushless Roc 412 Element Proof motors. Ohhhhh mamma! Each one of these axles are independently controlled by a motor and transmission mounted directly to them. The servo is for steering, and since both axles have these servo's, they can steer in both directions, or in the same direction. Also.. they can be controlled as separate units. The Tekin Website has a TON of helpful information on their products, and you can see them here: www.teamtekin.com/products.html
In this video I install these items and also give some tips and tricks on soldering them.
14 Gauge Silicone Wire Spool 40 Feet: amzn.to/2XOIEgd
SUBSCRiBE & “Ring the Bell" ► bit.ly/JOovvU
"1 Million Views Club": bit.ly/2AYVrAF
RCSPARKS Shirts & MERCH: shop.spreadshirt.ca/RCSPARKS/
RC ADVENTURES™/ RCSparks Studio™ © 2019 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Medic Media Productions Inc. - ยานยนต์และพาหนะ
![[LIVE] : ONE ลุมพินี 69 | คู่เอก "กุหลาบดำ vs นาบิล"](http://i.ytimg.com/vi/PNM6U8e_HMo/mqdefault.jpg)
I'll tell you something, I'm 62 and I've been watching your videos for some time now. I recently bought myself my first rc plane, my 14 year old son and I have the most awesome time flying that silly thing around. We've crashed it and repaired it, but that's part of it. Thank you for inspiring me to get into the rc hobby, it has brought me and my son the greatest of joys.
I 100% would never got a crawler without watching your videos, it used to be all about how big and fast my RCs where and yeah that was enjoyable but no where near as much as the detail and variations u can get with crawlers, opened up a whole new side of RC I had never even considered and I enjoy it more than any other type of RC
U guys r gonna have a blast, I know Sluice is pumped we were talking about the TTC yesterday, like I told him I wish I could be there n having a great time creating memories with my RC Family
How do people click the dislike button on these great videos? You produce AMAZING work that got me into the hobby and will keep me in the hobby for the rest of my life. Thanks for that. I guess there are people out there that are very negative and somehow do not like the way you inspire people like me to keep the hobby alive. I'll always be with you on this channel.
Excellent video again. People may not mention it as much as they should, so thank you for the small tips. Like burning with the center of the lighter and not the orange flame end, to prevent soot build up on the wire. Thanks. :)
I’ve been on my local walking trail and had people stop and stare as I drive my truck on my. There seems to be a mix of people that are amazed by the extent of the hobby and people that have to try to make you feel bad about being in the hobby. I was talking to a guy I go to High School with a couple weeks ago and he thought RC was stupid. To each is own, but don’t bash the hobby until you have given it a fair shot. The scale truck movement has really taken off in the last few years, and I’m excited for the new technology and new enthusiasts that will be coming along for the ride! You are the reason I got into scale stuff last year, so thank you for helping me go broke!!!
What a beast of a rig tango is, that thing is going to look awesome, Good luck to everyone competing in the ttc hope you all put on and amazing show.
It will be an amazing TTC, can't wait to see all the people having fun in this competition.
Look'n good bro! Twin brushless WOW! What a way to bring it! Cant wait ti see the family in action. Best of luck brother! Cheers for a hopefully pain free weekend! Right On!
Looks like it's going to be a GOOD TIME Aaron, have fun!
I have also been watching for a while. TH-cam Gold, Loading Wars and any of your shows that you post. I have a large scale MOA that I is going to very well get newer motors and esc's. You have given great ideas and inspiration to your fellow rc followers. As always, great shows and info. Thanks again.
I predict that you are going to blow the competition away!!
Fan here since 2010...... great vid bro
Never disappointing as always. Awesome job brother
the tenth TTC - this is so amazing - can't wait for it
Can't wait for TTC 2019! Always so many creative scale trucks, and loads of great competition. Class 4 is gonna be awesome. -"Angry" Dave
Out on the trails you are just taking "your" dog for a walk that doesn't run away or have to have its poop picked up. ;-)
Best esc soldering tutorial I've seen. Thank you!
Glad you enjoyed it!
Yeah medic, that's going to be awesome !! Plenty of power. I will be watching for the video's.
SUPER STOKED‼️ another epic video👌😎🦊
Tango looks amazing, and those brushless unit's look good. I'm ready to see the running of the TTC. Good luck.
What's the add for the tango called
Very good upgrade and great work, this Tango really has a great monster truck look !!
I can't wait ...this event is so awesome
I go outside everyday to go crawling with my deadbolt. People need to just get out and do it. Its fun to go out with an rc and enjoy nature
Thanks for the viedo man hope your well. Will check it out in a minute.
Top quality soldering station/iron....I grabbed one exactly like that after using one at a job I had assembling electronics/circuit boards
Yeah that's going to be awesome !! I am ready to see the running of the TTC yeah good luck my friend
Good Lord. You sur e know how to entertain us with content. Bravo good sir. 👏
The anticipation will kill me waiting for ttc footage.
Awesome rig bud. Can’t wait to see this thing rip.
That is sharp....I love orange on anything
Such a sick rig! Some one needs to make a micro sound kit for rigs like that one!!!
When you said 10 years I was like Holy Hell, I've been watching a longtime.
Thems some good lookin rigs sittin there. Cant wait to see the ttc vid(s) for this year, always a fun event. Goina b so awesome this year to see how well moe does. I think he can outdrive alot of the guys there this year lol.
Congratulations on you're 10th year!!!
Can't wait to see it run in the mud.
Can't beat the weight distribution opportunities and low-center advantage of moa!
Those rims are nice! Slick truck
Love this videos medic, its like being there with you..:)
That rig is so bad ass.
I love tango you should do more after upgrade videos on all your vehicles
Awesome like always dude. One day I'll build a MOA 4 steer.
Iv been thinking about putting on an event here like the TTC.
Keep on keeping on
ITS TTC time. Go for the gold!
Wow... Love that rig.... Awesome...
Loving channel. I’ve started making videos for TH-cam now after seeing ur vids.
Great build and video
Four wheel steering is one of those things you don't know how great it is, until you have it. I don't have that fancy of a radio so mine just is front steer or four wheel steer.
I got my crawler to have something to do when I go for a walk! Since I live in a forest it only made sense!
Good luck guys!🎉🎊
I feel ya on the missing parts, I'm missing an M2.5x8 screw for my Blazer body. RC4WD only gives you two and all you need is two, unless you loose one...
I've been soldering professionally for 19 years and we use Hako irons (932) and also Weller (witch is my new go to iron, it holds the heat much better and heats up from cold start in a few seconds). I've always had my iron set to 800 to 850 for 8 hours a day 5 days a week. As long as you keep solder on the tip during stand by, the tip will last for a few months. Pro Tip: If you learn how to wrap the solder around your index finger to feed it in, you can use your middle finger and thumb to hold the wire in place. This comes in handy when soldering 2 wires together.
You should have seen me trying to do the loom on my trailer a few weeks back. I got $5aud that says my neighbor's filmed me doing said wiring, then played it back at x3 speed with Benny hill music inserted for good measure.
Nice! Always helpful and entertaining at the same time, these videos. Looking forward seeing it in the TTC :-)
Great video enjoyed watching
Looks really good.
Great videos you upload!
Very nice video and I can't wait to see TH-cam gold this weekend!
Looking forward to the TTC!
I enjoy soldering,I’m no pro practice 👍🏻👍🏻👍🏻
That's awesome!
Good work man
Good luck at ttc. Have a blast. I'm so bummed I'm not going to make it.
Great video also great conversation....love how far tjerc world has come in so many ....I myself an a few friends got a rc bouncer series going for New England
💪 always nice to see your vids man i love it ❤️
That would have been horrible if you weren't able to get the motor or ESC through the frame, resolder is so much fun. Such a cool rig.👍
I like it Medic. Now to see how the TTC goes.
Can’t wait to see this year TTC
Nice video!!!
Awesome vid bro
I love this stuff...I won't one so bad
Looks fun
Can’t wait to hear how it did.
I would insulate the wires on the ESC.
If a screw, a tool, a body clip or something else falls on those connectors then you could have a problem.
I would use T-7000 or PlastiDip or similar, then you can easily remove it.
Or solder the wire in a straight angle and use shrink tube.
Hey man. Check your local hydroponics grow store for small spray nozzles that fit into PVC. You seem to have a need for them in some of your other projects. Love your videos!
Fun fun fun 😊
it is perfect RC 😍
Very nice upgrade to "TANGO". One day I will upgrade my Clod Crawler with some Brushless Powerhouses and incorporate the individual axle control as well.. #RCSPARKS #YTG2019
Hey Medic another great video! I really like seeing the down to nuts and bolts videos. They have helped me out quite a few times. I think that its better seeing it than just trying to read a schematic or directions of some sort. I love the build/repair part of the hobby, almost as much as going bashing haha. Keep up the great video content. Always looking forward to the next RCSparks episode.
Love the channel and love this build I so want one
That's awesome bro have fun in the comp someday I'll get me a 1/10 lol
Verry good!
Love your bids
Nice trucks
That's how I felt when I put the new motor on the Everest10 lol
Medic thank you for the many years of information entertainment and encouragement I finally bought my first trail truck 2 days ago the SCX24 but I'm looking forward to progressing quickly to 1/10 scale. I just need to get on a trail hopefully this weekend. Already did mods on it and looking for upgrades.
I think some people wouldbe surprised to see how long gears can last with no lubricant at all. Especially in an application like this where the will see relatively low use and are of high quality. Dry lube or no lube is definitely better than something that will attract grit. I live in Florida and my truck that frequently sees mud gets nothing on the r&p. I clean them frequently and they do fine.
9 thumbs down wtf. Great video love this truck cant wait to see it in action.
Im new at this! How did you manage to get those two esc working on the remote Control?
I like to see a properly tinned tip ! And a properly tinned wire !
Still my favorite one out of your fleet. One day ill build a cage.
Do you think they will allow your XTM x-crawler in ttc?
What are your favorite all time 1.9" tires for trx4s for crawling?
i like it👍👍👍
Aaron, PLEASE feel free to tell stories while doing mundane stuff. I listened when you talked about your first trailing event. I know how to sawl-der (Huh?) sawder! and change motors & this that & the other but I watched anyway because it's always interesting to listen to someone who's experienced tell good stories.
Same
i've watched you since the beginning and you are one of the best youtubers i have ever seen. Your quality of videos and your passion for the RC hobby and the community feel makes me feel like i'm at the TTC with you guys. Love the videos always look forward to your uploads !
Put some good run time on Tango ! Would love to know which parts are going to fail first. Double brushless sweet. PS. TH-cam GOLD BABY!!😀
Need to upgrade my Winnebago somehow like that:)
Sweet pinky is going been a while and great video
Pinky is 9 years OLD!
@@TheRealRCSparks I know she's getting up there I've been subscribed to this channel since the beginning
Do you have 2 different tire in that or did you cut the front ones
I have a redcat clawback and tried to put 2 brushless motors but within 5 min of run time one of the esc burnt up. what did I do wrong. the wiring was the same as you did .
1 ROC 412 has more than enough power to make a rig that size fly. 2 should be just right.lol.
Rig looks good
Are there actually planetary gears under those axle caps??