1993 Porsche 968 VERY NOISY ENGINE!!!!

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 พ.ย. 2023
  • Hi All
    Welcome to my channel! Today, we've got a Porsche 968/944 with an engine that's making some unsettling noises. Join me as we delve into the heart of the issue, meticulously strip down the components, and embark on a journey to uncover the source of the disturbance. Together, we'll not only diagnose the problem but also skillfully execute the repairs needed to restore this Porsche to its optimal performance. Buckle up, enthusiasts, as we dive deep into the world of automotive diagnostics and hands-on restoration!
    If you're finding value in these videos, don't forget to show your support by hitting the like button. And for more content like this in the future, make sure to subscribe so you stay updated on all the exciting automotive adventures and repair journeys coming your way. Your support means the world, and I can't wait to have you along for the ride in the videos to come!
    www.melsmotors.co.uk
  • ยานยนต์และพาหนะ

ความคิดเห็น • 18

  • @artmchugh5644
    @artmchugh5644 2 หลายเดือนก่อน +2

    On this old car I would think that you should take the cam cover off and check the cam chain connecting the cams ! The rubbing block for the tensioner can give you drama!!!😊😊😊😊😊😊🍺🍺🍺🍺 just sayin

  • @terencebrown1754
    @terencebrown1754 6 หลายเดือนก่อน +1

    Thanks for taking the time to post this Mel. It gives us 968 owners knowledge and there’s very little out there to help us.

  • @darrensimons1529
    @darrensimons1529 3 หลายเดือนก่อน +2

    Sounds like the tension on the either cam belt or/both balance shaft belt is too tight. The slack on these belts are way less than you would think and are best done with e belt tensioner. Too tight runs the risk of snapping and killing the engine. Whereas, too loose, you run the risk of skipping a tooth and killing the engine. Also, that oil leak is likely from one of the front end seals from either the crank or balance shaft. It would've made sense to change when the belts and water pump were off as oil will definitely still be leaking.

    • @melsmotors
      @melsmotors  3 หลายเดือนก่อน

      Appreciate the feedback 👍😊

  • @wg7996
    @wg7996 5 หลายเดือนก่อน +2

    The Balance Shaft Belt Is much to solid. It has to be very loose ore it starts to make a Noise .

    • @melsmotors
      @melsmotors  5 หลายเดือนก่อน

      They were all good thankfully 😁

  • @henryhawk978
    @henryhawk978 7 หลายเดือนก่อน

    Nice job, the one hundred thousand miles service is up for my Odyssey. Not looking forward to it, but it's doable for my skill level. Enjoyed the video and WORK SAFE OUT THERE!

  • @phill3144
    @phill3144 7 หลายเดือนก่อน +1

    Nice job

  • @Peter-sm8bj
    @Peter-sm8bj 7 หลายเดือนก่อน +1

    Nice work u did on that porsche mate 👍

  • @firestorm755
    @firestorm755 7 หลายเดือนก่อน

    Great job

  • @Peter-sm8bj
    @Peter-sm8bj 7 หลายเดือนก่อน +2

    Mate i fixed my focus 1.0 ecoboost the fault all along was a broken bonnet switch it must shut ecu down to low power or something so i chopped both wires joined them car runs spot on 🤣

    • @melsmotors
      @melsmotors  7 หลายเดือนก่อน +1

      If you don't buckle your seat belt in a fiesta you also get low power! Did you road test it without it plugged in? 👍

    • @Peter-sm8bj
      @Peter-sm8bj 7 หลายเดือนก่อน +1

      Drove it 5 miles m8
      But with the 02 sensor out the car went to mush after a 1 minute drive its all good now mate the only thing i need to try and solve somtimes i start it up and the dash says engine malfunction swrvice now naybe i need to oil filter change it and reset service the car driving me mad 😂

    • @Peter-sm8bj
      @Peter-sm8bj 7 หลายเดือนก่อน

      @@melsmotors
      Hi mate do you know if the focus 1.0 ecoboost has a bug software problem ?
      Somtimes i start it it says engine malfunction service now but when i switch ignition off abs back on the message is gone do u think i need to oil and filter change then reset oil life cheers 👍

    • @Peter-sm8bj
      @Peter-sm8bj 7 หลายเดือนก่อน +1

      @@melsmotors
      Hi mate my nephew has a fiesta 17 plate 57k on the clock he drove 5 miles with oil light on the top end of engine is tapping away do you think it can be saved ?
      I was thinking about dropping the oil pan cleaning the oil pump filter and look at the oil pump belt aswell cheers

    • @melsmotors
      @melsmotors  7 หลายเดือนก่อน

      @@Peter-sm8bj Hi, I couldn't even tell you even if it was in my workshop, sadly I can't see inside an engine! It would be nice to have that power though

  • @ChileVuela
    @ChileVuela 6 หลายเดือนก่อน

    Common wisdom in the community is that the timing belt should be changed every 4 years. The balance shaft belt should be surprisingly loose (edit: the whirring at the video is a sign that it's too tight). Oil leaks from balance shafts seals and crank seals - best to do that while in there doing the timing belt. Parts are available but they may take a bit to get there.

    • @jakerade1
      @jakerade1 6 หลายเดือนก่อน

      yeah the balance shaft belt wants about half a turn in it - i would say it was about right at the beginning. Needs to be surprisingly loose. Also, you need to use the crank washer on the back of the tensioner when compressing it