i just spent nearly 2200 on a washer in dry 😫😫😫 i didnt want to spend an additional 600-700.. i have all thr tools listed above.. thank you thank you for this
This is a beautiful build - thanks for sharing it. I’m going to create something similar, but plan to add a (removable, though I haven’t decided how to make that work yet 😋) cabinet around/over the machines. I was initially going to just create a cabinet in order to a) have a counter, and have a basket storage storage next to it, but this is a better use of space, will feel better on my back, and will look much fancier. Really nice work!
My mom would love something like this. I was going to order one online but the cost is through the roof. I will try my best to build this. Thank you so much for sharing this amazing project.
Nice build! If it is not up against walls on either side then you definitely should add cross bracing of some sort along the back - as it is there's very little preventing left/right movement which will happen with washers and dryers. For starters the back edge vertical 2x4's should be turned 90 degrees to help, and then run two 45 degree bracing pieces to reinforce further.
Have you noticed any noise difference from the washer and dryer being on this platform? I could see the vibration from the washer and dryer resonating with the wood and making them louder than when they are sitting on a concrete floor. Thanks.
Hello, I'm getting ready to make a very similar plateforme for our laundryroom. Could you tell me what type of wood you used please ? In the blog only "boards" is mentioned, but not the type. Thanks
Very nice, I was looking for exactly this. Now, to get to work! Question: how well does the cabinet enamel paint hold up to the baskets being put in and out of the cubby holes?
So i built this but raised it to a total of 30 inches high. The platform is pretty sturdy but had a little rock to it. I wasn't sure if you had any idea on extra support to keep it from rocking.
Absolutely love this video and idea as my wife and I are looking for something almost exactly like this. The only thing I wish was that your voice was a little louder and clearer in the video. Maybe a different microphone would help? Anyway, thank you for the video!!!
Our machines are on the risers they came with now but shake soooo much. Would this help you think? Our machines are level and shipping bolts are removed. Either they’re not in the risers right, it’s because they’re on our second floor, or, they just are naturally violently shaky machines but I’m wondering if it’s worth us trying to build a solid shelf for them haha
When you assembled the drawer, what were the black pieces you used to hold the corners in place? Where can I find them? Thanks for a great video and the instruction.
Awesome work... Looks very sleek! Would you have any recommendations for a DIY pedestal for a LG washtower (basically a washer/dryer on top pf each other that is saving some space than a stackable pair)?
This is a great plan I made was proud of it but when we installed the units turned on the washer it went through the cycles when it got to spin it was out of balance it shook the whole stand so I was wondering if they should be separate just a thought
you left us high and dry on the last step! I built this cabinet, but now I have no idea how to install the drawer. Why did you skip this part? Can you please send a link? It says you link below in the extras, but I clicked on those and it is just more tutorials on other projects. Do you have a tutorial for this project? seems like there are a ton of parts and instructions missing!
There is a link in the article to the build plan. It goes step by step with images. I also have a dedicated article for building drawers. housefulofhandmade.com/build-diy-drawers/
I am new to woodworking this actually the 1st thing i am building for my mom. Can you confirm how many sheets of plywood and mdf you used. Looking at the plans from the link its states 1 sheet of 3/4 4x8, 1/4 ply or mdf 4x4, and 1/2 2x4 Just confused on if i can't do math or if one sheet of 1/4 4x4 makes the 4 sides and drawer front panel or if its a mistype on the plans. Same for the 3/4 top and shelf bottoms. It appears you used 2 separate sheets for the this in the video.
There are three thickness differences in the plywood. So you will need three separate sheets. The sizes listed are the smallest sizes you can easily purchase. I buy full sheets of plywood typically because the value is so much greater and then use the excess in future projects. If you are just starting out chances are mistakes will be made and having extra wood will be helpful too :)
Great project and good instructions! Where can I find the small corner clips you used to hold the drawer pieces in place while you glued and screwed them?
It has held up beautifully. I am not sure what you mean by stick in place. I have had to move the washer because something fell behind and it worked as expected.
They are as stable as putting them on the ground. If the washer gets a bit off balanced you hear some rattle and have a bit of movement, but like I said, no different than on the ground.
@@marcotardio5831 I have gotten some since posting. If you level the pedestals with the floor and the machine to the pedestal they won’t move. We were worried too,but after a couple of months they haven’t moved any.
i want to do this but it seems to require a LOT of tools that i dont have. aside from mostly hand tools that i have and a drill i feel like i have to spend a few thousand on some equipment!
More expensive tools usually make the project easier, but you don't have to have them. This could be done with the basic tools like a circular saw and drill. Check the link to see the detailed plans
I am not sure what you mean. If you mean the washer and dryer, its as easy to service as it is to get it into place. You will most likely have to take the machines down to have them serviced.
Ok. I built this. Follow all the instruction. I hate this base. First of all, u mentioned at the end thay u just made a hole in the back for the vent. That sounded so easy. No!!!! The stand is exacyly for the washer and dryer, there is no extra room. So I dont know where u just made a hole and thats it. I had to put extra support o bc the hole was in the frame. Secobd problem. My washer moves and I am afraod it will fall anytime. The weight of both washer and dryer are too much for this. I am taking it out and throw it in the garbage once I figure how to bring everything down.
Your measurements for wood thickness on face is off. You stated 2 inches which would leave a 1/4 lip after 3/4 top is installed. 3/4 and 1 1/2 is 2 1/4 leaving uncovered edga. Also would be nice to slow video for each step
Very impractical. MDW and moisture is not a good combo. And if you ever tried to move just the washer in order to do the necessary cleaning behind it, replace a vent or water hose or do anything else, try doing it when you have to move one platform with both machines on top. No appliance service person would attempt to work on the equipment in this config.
$20,000 of woodworking equipment not included In other news - pedestals made specifically for your washer are about 200 dollars, and they install them.
You made this easy to follow, very helpful, useful and an awesome DIY. Thank you so much!
I am glad you found this helpful!
i just spent nearly 2200 on a washer in dry 😫😫😫 i didnt want to spend an additional 600-700.. i have all thr tools listed above.. thank you thank you for this
I am glad its going to help you out!
How much this ended up costing?
This is a beautiful build - thanks for sharing it. I’m going to create something similar, but plan to add a (removable, though I haven’t decided how to make that work yet 😋) cabinet around/over the machines. I was initially going to just create a cabinet in order to a) have a counter, and have a basket storage storage next to it, but this is a better use of space, will feel better on my back, and will look much fancier. Really nice work!
Awesome idea! Also like how how you fast forward through the cuts and attachments! Great job!
My mom would love something like this. I was going to order one online but the cost is through the roof. I will try my best to build this. Thank you so much for sharing this amazing project.
You can do it!
Nice build! If it is not up against walls on either side then you definitely should add cross bracing of some sort along the back - as it is there's very little preventing left/right movement which will happen with washers and dryers. For starters the back edge vertical 2x4's should be turned 90 degrees to help, and then run two 45 degree bracing pieces to reinforce further.
thanks for the recommendations.
Great, I'm definitely building this for my laundry room
I wish you would of showed us how you routered the front drawer panel, 2 inches in on both sides
Thank you so muc for this video. I'm in the beginning stages of revamping my laundry and will use this idea for my front loader. Great idea!!👏👍👊
You are so welcome! I am sure you will love it as much as I do.
Great job!! We are going to build the same!! Thank you for sharing!!
Glad to hear it. It has been great to keep the clutter down in the laundry room.
after seeing what all it takes including tools.. I am buying the two matching colored pedestals from LG.
Glad I could help in your decision making process.
when you dont have the coin this is what people 😁
I picked up my 2"x4" s this morning, and I'm making this today. Thanks for the inspiration!
There expensive af. This is cheap and easy.
Yeah if you don't have tools already and this is your first project, sure it's expensive, but if you have the gear the materials aren't that bad
OMG ..😮I love this idea. Useable space 💕
All I heard was “pocket holes.” You said it about 300 times lol Great video!
I wanted to make sure I was very clear 🤣
Have you noticed any noise difference from the washer and dryer being on this platform? I could see the vibration from the washer and dryer resonating with the wood and making them louder than when they are sitting on a concrete floor. Thanks.
There hasn't been any additional noise. Mine is not on concrete but I don't think that will make a difference.
Hello, I'm getting ready to make a very similar plateforme for our laundryroom. Could you tell me what type of wood you used please ? In the blog only "boards" is mentioned, but not the type. Thanks
How did you get the washer and dryer on the platform?
Very nice, I was looking for exactly this. Now, to get to work!
Question: how well does the cabinet enamel paint hold up to the baskets being put in and out of the cubby holes?
They haven't been used as much as I'd like, but still at least 4 baskets a week and they are holding up perfect with our plastic baskets
@@HousefulofHandmade thanks for the additional feedback. I'll definately try that kind of paint for my project!
So i built this but raised it to a total of 30 inches high. The platform is pretty sturdy but had a little rock to it. I wasn't sure if you had any idea on extra support to keep it from rocking.
Securing it to the wall could help if it is open on one or both sides.
Absolutely love this video and idea as my wife and I are looking for something almost exactly like this. The only thing I wish was that your voice was a little louder and clearer in the video. Maybe a different microphone would help? Anyway, thank you for the video!!!
Our machines are on the risers they came with now but shake soooo much. Would this help you think? Our machines are level and shipping bolts are removed. Either they’re not in the risers right, it’s because they’re on our second floor, or, they just are naturally violently shaky machines but I’m wondering if it’s worth us trying to build a solid shelf for them haha
What did it cost?
So nice!! I love everything about it!!
Me too!
I love your design but, is there any way to add a pull out shelf on top of open area? I have COPD and bending over is difficult for me.
Drinking game….every time she says “pock-a-holes”, have a cocktail! Lol I know it’s pocket holes. Great video!
When you assembled the drawer, what were the black pieces you used to hold the corners in place? Where can I find them? Thanks for a great video and the instruction.
They are called corner squares from Rockler. there is a link in the description.
Beautiful project! Nice job!!!
Thank you
Beautiful I love I wish I had your talent 🥺
Awesome work... Looks very sleek! Would you have any recommendations for a DIY pedestal for a LG washtower (basically a washer/dryer on top pf each other that is saving some space than a stackable pair)?
This is a great plan I made was proud of it but when we installed the units turned on the washer it went through the cycles when it got to spin it was out of balance it shook the whole stand so I was wondering if they should be separate just a thought
I have run countless loads and have never had that issue.
Can you build pedestals by using shelf frames
Looks incredible! What grit did you sand at?
you left us high and dry on the last step! I built this cabinet, but now I have no idea how to install the drawer. Why did you skip this part? Can you please send a link? It says you link below in the extras, but I clicked on those and it is just more tutorials on other projects. Do you have a tutorial for this project? seems like there are a ton of parts and instructions missing!
There is a link in the article to the build plan. It goes step by step with images. I also have a dedicated article for building drawers. housefulofhandmade.com/build-diy-drawers/
I am new to woodworking this actually the 1st thing i am building for my mom. Can you confirm how many sheets of plywood and mdf you used. Looking at the plans from the link its states 1 sheet of 3/4 4x8, 1/4 ply or mdf 4x4, and 1/2 2x4 Just confused on if i can't do math or if one sheet of 1/4 4x4 makes the 4 sides and drawer front panel or if its a mistype on the plans. Same for the 3/4 top and shelf bottoms. It appears you used 2 separate sheets for the this in the video.
There are three thickness differences in the plywood. So you will need three separate sheets. The sizes listed are the smallest sizes you can easily purchase. I buy full sheets of plywood typically because the value is so much greater and then use the excess in future projects. If you are just starting out chances are mistakes will be made and having extra wood will be helpful too :)
Great project and good instructions! Where can I find the small corner clips you used to hold the drawer pieces in place while you glued and screwed them?
Kreg KHCCC 90 Corner Clamp
very nice job, but will it hold the washer and drier wight, and will the washer stick in place due to vibration while spinning fast
It has held up beautifully. I am not sure what you mean by stick in place. I have had to move the washer because something fell behind and it worked as expected.
How did you paint? Is this pine
I noticed the commercial ones have brackets on top. Has yours been stable enough without them?
They are as stable as putting them on the ground. If the washer gets a bit off balanced you hear some rattle and have a bit of movement, but like I said, no different than on the ground.
You are amazing, Great job. How did you lift the washer on the stand?
With a helping hand. Two of us picked it up. The washer is heavier so start with that one.
How did you get the dryer onto the pedestal?
My husband and I lifted it up. The dryer was the easy one 🤪. Then I crawled inside the cubby below to hook everything up.
Nice job. Do you have plans to add a flood basin aka drip pan with drain?
Thank you, I do not plan to add anything else.
Great looking build. Once you have the machines up do you attach them anyway to the pedestal?
I did not, they are just sitting on top
How do you prevent them from vibrating off the pedestal?
@@marcotardio5831 I have gotten some since posting. If you level the pedestals with the floor and the machine to the pedestal they won’t move. We were worried too,but after a couple of months they haven’t moved any.
@@marcotardio5831 the lip does that
How did you attach the face to the drawer? Just center it? Did you use Brad nails?
I center it and screw it in, all the details are here housefulofhandmade.com/how-to-attach-drawer-fronts/
i want to do this but it seems to require a LOT of tools that i dont have. aside from mostly hand tools that i have and a drill i feel like i have to spend a few thousand on some equipment!
More expensive tools usually make the project easier, but you don't have to have them. This could be done with the basic tools like a circular saw and drill. Check the link to see the detailed plans
@@HousefulofHandmade thanks!
Da pra fazer com mdf 30mm ?
❤
I would love to have these plans, but Kregg said they don't have this one. How can I get it?
Peggy, I am glad you like them, there is a link in the description and you can go to housefulofhandmade.com and search there as well.
How easily can the unit be serviced (When needed)?
I am not sure what you mean. If you mean the washer and dryer, its as easy to service as it is to get it into place. You will most likely have to take the machines down to have them serviced.
Does the drawer hole a full size detergent jug?
I am guessing you mean the largest of detergent jugs, no it will not hold most large detergent jugs.
Where can I find that jig? It's set in place and you just put the pcs in and drill? Thx.
It's the Kreg Jig 720 pro. Follow the build plan link or a google search will get you there.
What is the paint color - really nice!
NYPD Blue by Behr
@@HousefulofHandmade thank you!
i am going to do this thank you
glad to hear it, and you are welcome!
@@HousefulofHandmade update , I used a pallet, collected refurbished and discounted wood from home depot clearance cost under 20$ can we post photos
Can’t find the plans on the Kreg site
The link direct to the plans on Kreg is near the bottom of my post. housefulofhandmade.com/washer-dryer-platform-with-drawer/
What is the color and brand of paint that you used?
Behr NYPD blue.
What type of paint? Oil based?
I used cabinet enamel paint from Behr called NYPD
16" you must be over 6', my wife is 4'11" and I can only make mine about 10" or she cannot see the top of the machines as needed to add detergents
Ok. I built this. Follow all the instruction. I hate this base. First of all, u mentioned at the end thay u just made a hole in the back for the vent. That sounded so easy. No!!!! The stand is exacyly for the washer and dryer, there is no extra room. So I dont know where u just made a hole and thats it. I had to put extra support o bc the hole was in the frame.
Secobd problem. My washer moves and I am afraod it will fall anytime.
The weight of both washer and dryer are too much for this.
I am taking it out and throw it in the garbage once I figure how to bring everything down.
Your measurements for wood thickness on face is off. You stated 2 inches which would leave a 1/4 lip after 3/4 top is installed. 3/4 and 1 1/2 is 2 1/4 leaving uncovered edga. Also would be nice to slow video for each step
There is a detailed description with images for each step on the blog.
@@HousefulofHandmade where is the blog? I need the plans.
14:29
Unless you’re a big strong man like me 😌
Very impractical. MDW and moisture is not a good combo. And if you ever tried to move just the washer in order to do the necessary cleaning behind it, replace a vent or water hose or do anything else, try doing it when you have to move one platform with both machines on top. No appliance service person would attempt to work on the equipment in this config.
Talks too much. Just pull out the tools and speak as you do it vs talk us to death before ever touching a tool.
$20,000 of woodworking equipment not included
In other news - pedestals made specifically for your washer are about 200 dollars, and they install them.