thank you very much brother. you save my life by sharing this video. i bought a used bike and it has exactly same controller, i messed up settings accidentally and the bike is not starting now. I can just go to default settings with this video. thanks a ton.
Thanks man I do not know how my settings got screwed up but my throttle wouldn't even work I set just about everything to what you set them to thank you very much💥💥🍔🍻🐿️
You did a great job thank you I got my bike back By the way I also have bad knees My left knee has been opened up 10 times maybe 11 Sylvia I have mobility issues but again thank you for your video have a great day
hello, can you please advise me about the cruise control, I have this type of display on my e-bike and in the settings of program 16 I have it set to 0, but the cruise control does not work for me, did the cruise control work on your bike, or does it have to be activated somehow?
Hi how are you doing, i have a question, do you any idea if the display has a setting to turn itself off so the battery doesn't completely discharge? My father was using my bike and he said it suddenly turned off by itself, but he said the display showed there was some battery left (two bars). So i don't know if it turned off because it runned out of battery completely (the manual advises to NEVER let that happen because it damages the battery) or if it was turned off by itself. Thank you.
Excellent description. I can't set the speed or power for each individual assistance level. Already from level 1 the ebike reaches 20 km/h. Can you help me?
Got some 411 you need to know about. To start #3 if you put it on 36 which is default will give you a FALSE reading it will show you full bars if you put it on 48 will give Accurate reading. The other is #8 Which is speed if you put it on a 100 you will drain your battery faster I dropped mine down to 80 And The only difference is on 1st gear you don't start fast but what it does it gives you the same speed eat without draining your battery faster You may lose a little speed but not much But if you do keep it on a 100 you will drain your battery faster
Thank you. I never use PAS and want it always 0 (clumsy feet). I want the throttle to always allow full power. A PDF explaining all settings would be appreciated.
i have the same lcd but it shows a error meassage E 09 , do you mabay know what this means and what part(s) i need to replace , i have been looking all day for the answer
Hi there I found this online: The electric bike error code 9 refers to the minimum one phase wire of the motor that has been damaged or disconnected But I'm not sure so I suggest you to look carefully online. Sorry I can't help you more
En las palancas del freno ay tornillo en el medio aprieta los un poquito lo que pasa que ay un imán y al separarse mucho pone eso E2 o Revisa las pastillas del freno a lo mejor ya están gastadas eso me sucedió a mi
@@gulfbreezr I only upped it by a couple but didn't notice any changes in performance, I didn't go too high because you really don't wanna pull more amps than what the battery can provide.
, the bms on the battery should only allow you to pull so many amps from the battery so if your instructing your controller to pull more amps than the battery/bms can discharge then you run the risk of potentially damaging your battery or bms
Hello, how are you, I have the same ebike but when I install the accelerator and set the p10 to 1 so that it works with the manual accelerator, it tells me error 08. How can I unlock it so that it works with the manual accelerator?
thank you very much brother. you save my life by sharing this video. i bought a used bike and it has exactly same controller, i messed up settings accidentally and the bike is not starting now. I can just go to default settings with this video. thanks a ton.
Many thanks for the video and the pdf.
Thanks man I do not know how my settings got screwed up but my throttle wouldn't even work I set just about everything to what you set them to thank you very much💥💥🍔🍻🐿️
Absolute legend, thanks mate! Was a great help. You explained it very well :)
Also thanks for typing it into the description too. Much appreciated
Many thanks for the info on the 'p' settings, first video I've seen to explain them all.
You did a great job thank you I got my bike back By the way I also have bad knees My left knee has been opened up 10 times maybe 11 Sylvia I have mobility issues but again thank you for your video have a great day
I have same bike thank you for this video helped me understand all the P settings and the correct settings :)
Much needed information. Thanks works for my Sedona bike.
Thank you so much!
Your rearview mirror is so cute
hello, can you please advise me about the cruise control, I have this type of display on my e-bike and in the settings of program 16 I have it set to 0, but the cruise control does not work for me, did the cruise control work on your bike, or does it have to be activated somehow?
This helped thanks.
Hi how are you doing, i have a question, do you any idea if the display has a setting to turn itself off so the battery doesn't completely discharge?
My father was using my bike and he said it suddenly turned off by itself, but he said the display showed there was some battery left (two bars). So i don't know if it turned off because it runned out of battery completely (the manual advises to NEVER let that happen because it damages the battery) or if it was turned off by itself.
Thank you.
Excellent description. I can't set the speed or power for each individual assistance level. Already from level 1 the ebike reaches 20 km/h. Can you help me?
Where can I buy a screen like that?
Got some 411 you need to know about.
To start #3 if you put it on 36 which is default will give you a FALSE reading it will show you full bars if you put it on 48 will give Accurate reading.
The other is #8 Which is speed if you put it on a 100 you will drain your battery faster I dropped mine down to 80 And The only difference is on 1st gear you don't start fast but what it does it gives you the same speed eat without draining your battery faster You may lose a little speed but not much But if you do keep it on a 100 you will drain your battery faster
Thanks for letting us know
Mon vélo ne dépasse pas 10km/h y’a-t-il une solution ?
Thank you. I never use PAS and want it always 0 (clumsy feet). I want the throttle to always allow full power. A PDF explaining all settings would be appreciated.
Hi. Any chance of putting a photo of the manual on here. Have been looking for it for months and can’t find it anywhere?
Sorry I can't find it anymore cause I changed my phone
The only thing I don't have right now is indicator headlight is on or off 💥💥🍔🍻🐿️
i have the same lcd but it shows a error meassage E 09 , do you mabay know what this means and what part(s) i need to replace , i have been looking all day for the answer
Hi there
I found this online: The electric bike error code 9 refers to the minimum one phase wire of the motor that has been damaged or disconnected
But I'm not sure so I suggest you to look carefully online.
Sorry I can't help you more
The electric bike error code 9 refers to the minimum one phase wire of the motor that has been damaged or disconnected.Dec 26, 2021
@@silvio5043 thank you
Does anyone knows about error 10? My bike doesnt acellerate anymore 😢
Hello, how to disable cruise, input 0001 or 0000 on menu 16 , but it's not disable thanks you
Hi there.
Please just insert the 0
It should be done.
If it keep going then I don't know.
E9 es falla en el controlador
How do you set it on default settings?
The last P should be back to default.
Is what I remember.
hello how can I increase the speed of my bike it runs at 25 km / h while the limit is at maximum in the display
You have the 1000w ?
Hi. Is there a list for error codes? For me appears E 02 - by the way helpful video!!!
Just try to write the alarm on Google including the bike brand.
En las palancas del freno ay tornillo en el medio aprieta los un poquito lo que pasa que ay un imán y al separarse mucho pone eso E2 o Revisa las pastillas del freno a lo mejor ya están gastadas eso me sucedió a mi
If i set the P14 value higher will it increase top speed?
Hi there.
I don't think it will.
But you can try at your own risk
Dave, did you ever find out if we can increase the number on P14? I did it on my Eunorau but not sure about this one.
@@gulfbreezr I only upped it by a couple but didn't notice any changes in performance, I didn't go too high because you really don't wanna pull more amps than what the battery can provide.
@@davewood1982 Is it the battery amp rating or the controller amp rating that matters?
, the bms on the battery should only allow you to pull so many amps from the battery so if your instructing your controller to pull more amps than the battery/bms can discharge then you run the risk of potentially damaging your battery or bms
hello... still no PDF for the best settings?
I have a Keteles K800 2000W with 2 motors and this LCD
th-cam.com/video/biBSkWj-oQM/w-d-xo.html
Sorry mate.
I don't know how to attach to this video
Can you share the pdf
Thanks for your explanation! But I would like to have the manual :)
Where do you find the .pdf manual?
Can I have access to it?
Hi there.
I don't remember where I downloaded.
I just have it.
I don't know how I can help you.
@@silvio5043 upload it
You are funny
Hi!
My LCD is blocked in the P18 interface, can you share the manual with me? :(
Hi can this lcd be changed to a diffrent one ?
Hi there.
I don't know.
Probably.
11 should be 1 and it starts assist right away.
Problème bloqué P 06 comment débloque
The p6 is wheel diameter in inches.
What you mean P6 block?
I'm sorry what is 14
Controller current limit set by default at 12 amp
Range between 1 and 20
Bloody hell very complicated, your explanation made it worse lol.
Hi Ali.
Just let me know where I did wrong.
Hello, how are you, I have the same ebike but when I install the accelerator and set the p10 to 1 so that it works with the manual accelerator, it tells me error 08. How can I unlock it so that it works with the manual accelerator?