Is there any other projects you guys want to see me fabricate? Also if you guys want the plans for the engine stand don’t forget to hit me up on Instagram.
Just an idea to save a little time and add some extra flare to the stand would be to use an old front sprocket for the round piece instead of cutting one out 🙌
Good job kid. I've looked at the Motorsport engine stand for years and just couldn't stomach coughing up the $150+ they ask for it. I think this will be a winter project for me when the snow starts falling.
Very nice work and great design. Nice detail and explanation provided here. I personally just finished building a stand for my Honda Z50, which is specific to that engine and meant to hold the bike as assemble it onto the engine. I would like to use some of your ingenuity here to build another stand for my Honda cbr125 engine, as well we other small bike engines that I work on. Being able to rotate and lock it in place much make it much easier for reassembly so that everything slides into place nicely.
Thanks for the video What size stock is the G arm made out of….maybe I missed it in the video. Going to make three of these…two for me and one as a gift
very nice design, I like it but im not sure if it would be that useful... if youve got the engine out youd most likely be splitting the cases which i assume you couldnt do with this stand? if youre doing a top end then you can leave the engine in the bike.
Thank you! It makes replacing bearings, crankshafts, putting in transmission shafts easier because you have the engine elevated and don’t have to worry about the shafts hitting the table as you push them through. Also you’re able to get the transmission at an angle where it’s easier to drop in.
Makes no sense, cant split the engine or put it together. You had to make the mounts like two wedges which get stuck in the engine mounting hole while you tighten them.
Is there any other projects you guys want to see me fabricate? Also if you guys want the plans for the engine stand don’t forget to hit me up on Instagram.
Thanks for the video - followed your instructions and now have a engine building stand that I've needed for ages
Just an idea to save a little time and add some extra flare to the stand would be to use an old front sprocket for the round piece instead of cutting one out 🙌
Incredible job man. Pat yourself on the back, you really knocked this out of the park!
Im building this Engine Stand today 5-14-2020 over here in Panama, thank you man for sharing this info with us!
Top marks for brilliant Engineering..Thanks
Thanks so much 🤟🏼
Good job kid. I've looked at the Motorsport engine stand for years and just couldn't stomach coughing up the $150+ they ask for it. I think this will be a winter project for me when the snow starts falling.
Thank you. That’s where I was at with deciding to build this. I think you will enjoy the project.
Nice work. Thanks for including the material dimensions.
Great job on that engine stand man! I'd be proud to use it for sure... Looks super functional.
Sweet motor stand. Very professional.
Thanks so much 🤟🏼
Very nice work and great design. Nice detail and explanation provided here. I personally just finished building a stand for my Honda Z50, which is specific to that engine and meant to hold the bike as assemble it onto the engine. I would like to use some of your ingenuity here to build another stand for my Honda cbr125 engine, as well we other small bike engines that I work on. Being able to rotate and lock it in place much make it much easier for reassembly so that everything slides into place nicely.
Nice job and great video young man !!!
Thank you!
Very nice build!
Really Very Good Work Buddy!!
Thanks for the video
What size stock is the G arm made out of….maybe I missed it in the video.
Going to make three of these…two for me and one as a gift
Nice job, Great design!!
Thank you 🤟🏼
it was very good congratulations work top
As for what you could fabricate, I vote a scissor lift stand. Specifically, one like the Motosport scissor lift, or something similar.
I will take a look at what’s out there. I was thinking of doing a regular stand at some point.
Wow excellent work on this engine stand!! You have some serious mad skills my friend!! You could easily market these stands and sell them!! :)
His actually copied a stand you can already buy
@@joels2517 for over $100
Sweet video! Keep it up.
Thanks Brock!
I like the smiley face at 20.35 :)
Haha some one noticed lol
That’s awesome love your vids man
Thanks man 🤟🏼
Welcome bro💯
very nice design, I like it but im not sure if it would be that useful... if youve got the engine out youd most likely be splitting the cases which i assume you couldnt do with this stand? if youre doing a top end then you can leave the engine in the bike.
Thank you! It makes replacing bearings, crankshafts, putting in transmission shafts easier because you have the engine elevated and don’t have to worry about the shafts hitting the table as you push them through. Also you’re able to get the transmission at an angle where it’s easier to drop in.
Brasil...🙋 Muito boa a ideia, vou fazer um para mim.
Awesome video nice job
Appreciate it Ben!
Hello man i have one question the little arm F 3"inches, what distance go to be?
Next build should be a 4 stroke I reckon bro , when is the next build going to be ?
I am looking for a bike right now.
Do u still have the plans for this. How can i get them thanks
Awesome!!!!
Nice video!
Thank so much 🤟🏼
hola buenas, me podrias deci las medidas del soporte o pasarmelas ?????
Love the hair
Thanks lol
Cool can I have a paper copy ?
Top class
I like this person
Nicee.
You created a sell-able product!
Maybe I will sell a few at some point...
Good
Can I ask what you do for a living ?
𝕚 𝕨𝕒𝕟𝕥 𝕥𝕙𝕚𝕤 𝕤𝕥𝕒𝕟𝕕
can u send me the diagram set up so i can make this please
Motosport stand home made i wonder is this legal lol
❤️️❤️️❤️️
Somebody already make te engine stand?
please send me a copy of your drawings along with size of cuts Thanks for Sharing
12th viewers
Makes no sense, cant split the engine or put it together. You had to make the mounts like two wedges which get stuck in the engine mounting hole while you tighten them.
Hey buddy, I messaged you on instagram for the plans?