maintenance on my single cab Silverado's! Blend Door, 3rd Brake light, AFR replacement!!!

Instagram: LSX_Panda
TikTok: LSX_Panda
Business Inquiries: [e-mail]
Engine
6.0 370 ci Iron Block, Weisco Pistons -3cc dish, Eagle rods 6.125.
-ARP hardware throughout
-Studded heads
-Comp Cam -235/243 .621/.624 113
-SKU 54-460-11 (Grind Number 285LR HR-13)
Tuned by DSM Lights Dyno Tuned with HP tuners
-Speed engineering 1-7/8 Longtubes
-799 heads
-90mm TB with x link
-TBSS intake manifold
-2006+ radiator with e fans
-Mighty Mouse Mild Catch Can
-LS6 ported Oil Pump
-Full speed engineering dual 3” exhaust
-Flex Fuel Sensor to support e85 or 93
-220 Amp Alternator
Transmission
-Level 5 4L80e RPM Transmission
-40k Trucool Cooler
-3800-4000 triple disk converter by Circle D
-Speed engineering drive shaft safety loop
-upgraded Yoke and conversion u joints
-Speed Engineering cross member
Rear
-3.90 gear ratio
-Eaton trutrac
Brakes
2020+ Front Caliper and Rotors
15" Conversion Rear Brakes
Suspension:
Belltech 4"/6" lowering kit
Springs and spindles for the front
C-Notch Flip Kit for the rear

[@Carl_Jr]

That switch problem is common. That's the first thing I had to do with the 2012 that I have, is replace the driverside master switch. $25 on eBay. 👍
Your truck's looking tight, man! Good job! 😎

[@SiskBuilt]

I’ll look into that!

[@jessesager9460]

Man that truck sh*ts n gits! Love it!

[@SiskBuilt]

Just a 6.0 with a misfire! Hahah

[@Aimlocked]

u have inspired me to buy a truck and do something like this!!

[@SiskBuilt]

I love them!

[@JKZ103]

The contacts on the switches are going bad and or dirty... you can take them apart and clean with qc contact cleaner and it normally fixes them... or you could just buy new switches, depends on what you want to do. Also, I've learned on the bosch/aem wideband sensors when they start counting like that they are done. If you leave the heated sensor on long enough without the truck running it will burn them up I have done it. I ended up putting mine on a switch for when I'm downloading a tune so it doesn't just sit there and fry it. Also had luck with the 30 dollar bosch sensors on ebay.. you can buy 4 or 5 for the price of an aem branded one. Good stuff bro, Panda f-in rolling son!

[@SiskBuilt]

I just swapped the sensors between trucks and the both work 😂 I don’t get it hahah

[@nsperformancetrucks]

Love your truck man. It sounds so good

[@SiskBuilt]

Thank you!!!! Just needs some wu tang warriors now!

[@darrinaleman4023]

my passenger window did that just b 4 the motor went out....i 1st replaced the buttons ....f n nothing !......replace motor with the regulator trust me ! get them at autozone so if something happens u can take them back

[@SiskBuilt]

I’ll for sure check it out

[@DavidMartinez-of3pt]

love the channel man keep it up
NBS

[@SiskBuilt]

Thank you!!!!!

[@cyclonekevin6199]

Those the same temps here, Maryland.😢

[@SiskBuilt]

Florida was going through a thing 😂

[@ronaldareyes9899]

Hi 👋 Cody.

[@SiskBuilt]

Hi!

[@MartinAguilar213]

Great video, you definitely need more burnout and donut videos 😅 just an idea for future content 🤷🏻‍♂️

[@SiskBuilt]

I doooo have an old set of wheels 🫡