Big Turbo Silverado gets Tuned!! Its so fast!!
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Instagram: SiskBuilt
TikTok: SiskBuilt
Business Inquiries: siskbuilt@gmail.com
Engine
6.0 370 ci Iron Block, Weisco Pistons -3cc dish, Eagle rods 6.125.
-ARP hardware throughout
-Studded heads
-Comp Cam -235/243 .621/.624 113
-SKU 54-460-11 (Grind Number 285LR HR-13)
-Tuned by Elite Tuning
-799 heads
-90mm TB with x link
-TBSS intake manifold
-2006+ radiator with e fans
-Mighty Mouse Mild Catch Can
-LS6 ported Oil Pump
-Straight 4” exhaust
-Flex Fuel Sensor to support e85 or 93
-220 Amp Alternator
Turbo
-Huron Speed T6 Single turbo kit
-VS Racing s480 80/96 turbo
Fuel
Dual 450 walbro
-8an feed
-6an return
-1000 cc FIC injectors
Transmission
-Level 5 4L80e RPM Transmission
-40k Trucool Cooler
-3800-4000 triple disk converter by Circle D
-Speed engineering drive shaft safety loop
-upgraded Yoke and conversion u joints
-Speed Engineering cross member
Rear
-3.90 gear ratio
-Eaton trutrac
Brakes
2020+ Front Caliper and Rotors
15" Conversion Rear Brakes
Suspension:
Belltech 4"/6" lowering kit
Springs and spindles for the front
C-Notch Flip Kit for the rear
I had the same reactions when I drove mine for the first time wish I could experience that again for the first time. I’m glad you got it going enjoy it!!
Dude I was so pumped and still am! Love it so far
That's what it's all about! Fk yeah 🤘
Time to turn up the power then
@@Thaggard_is300 I said for the first time. I still enjoy it lol.
Wish I could enjoy this 😢
by far the best chopping LS i have ever heard
Your Neighbors must love you i know my neighbors love my lsx cammed 😂
Your reaction is priceless man!
I have a 03 Sierra with a turbo lq4 and t56 swap. I blew the engine and I’m rebuilding it with a tsp 408 stroker kit. I can’t freaking wait to drive it again
I’m glad to see this beast up and running💪🏼
She’s ripping and it feels great!
That thing is an absolute beast!!
Thank you!
I love how happy and excited you are lol
180 degrees on a 4l80 after hard pulls and normal road driving is perfect! Parasitic loss becomes less with a warm trans.
This has motivated me to go ahead and build a truck!!!
I've got a 5.3 7875 I'm building the last 5 yrs can't wait to drive it again after all this time
sounds sooooo good sheeeesh!! panda is boosted and gf approved
Luckily I have that boost controller so I can just turn it down and let her go drive it
Badass truck homie!! Chevrolet all day!!!🇺🇲🇺🇲💪💪
That’s what I’m sayin!!!!
Bro “ ah did you hear it?” I felt that it my soul.
Man, thats a sweet setup, good lookin truck man! What size motor? I'm just finishing my 1st turbo build in my 99 Camaro. I built a healthy 408 Mike Lough did his magic on the block and rotating assy., as well as his oil mod. I've got a FI 91/102 T4 that's going to go on it, fab 9", TH400, super clean 44k mile car.
What'd yall do for exhaust? Three truck sounds nasty as hell man! I really wanted to run dual exhaust, split it at the turbo and try to squeeze it thru the k member. I know it'll fit on the d/s, but idk about the other... or ill do a single 4". It will have a exhaust with a muffler and will never have fender exits!lol I can't wait to get it running! It's been a long time coming man! I'm a anti roll bar, some fluids, a drive shsft... I'm sure a couple other small things, but I'm there with it!
Your truck sounds nasty as hell man! What cam is in it? I ended up with a cam spec'd by Cam Motion, to help keep my backpressue down as the turbo is still a T4, but it's all t6 aside from that.
All the faces he makes 😂😂 me when I’m almost done with a build 😂😂😂😂
Awesome truck dude, I found a stock 54k mile 4.8 2005 chevy silverado 1500 I think I am going to buy and turbo it, the body is super clean with zero rust. What wheel setup is that? Those are sick.
Should mount the cooler near the spare tire on a angle
Sounds good man ive got a 99 looks like yours ,great trucks
For that size turbo,hopefully you did the -12 drain to oil pan. I used the -10 in the huron kit and it wasn't enough drain back for my 80mm. I have v4 t6 kit from huron. I was smelling oil burning due to not having the proper drain size and was backing up. Just an FYI
I used a -10! But so far I haven’t smelt any oil yet, I do have an oil leak on the pan somewhere. Tracking that down!
How do you have the crankcase vented?
What motor and cam is this? Thing sounds wicked even being boosted!
Looks like you are in Broward country ? Nice truck have a 12 PPV & building a 02 extended cab shorted with5.3/6l80 like my Tahoe what cam are you running newest subscriber first time viewing 😀
5:09 is the most glorious alarm clock.
love the channel, keep it up brother!
😂😂😂 bro I know your neighbors be mad as hell when you get ready to leave for work 😂😂😂 looks like you get ready to leave around the time I do 4:30 am the only reason I haven’t went all in on my truck because mine is a daily driver so for five days straight that’s all they will hear every morning 😂😂😂😂 my truck going to be on flat 😂😂😂I already have dual Flowmaster
I have a 2001 single cab. Maybe it'll look that good one day. And have a LS in it. Just a 4.3 for now.
Don’t wait too long start getting little pieces here and there
Fixing to buy a 2001 totaled Tahoe to get the swap started
Bad ass truck man I like the wheel set up if you don’t mind what are the specs on the wheels and tires
Any car I had a stall in i plumbed it to the external cooler and back, skipped the radiator. Hang where it has air or even make a dam. If I ran it in the rad the coolant would heat some when converter was slipping and both took more time to get temps down.
Where did you get the blue lights for speedometer?
Looks good.
sounds great 🔥
did you put cooler thermostat on the trans
Elite tuning is one of the best
I am looking to lower my 2000 GMC 1500 and wanted to know what drop kit you used and how much of a drop in the front and rear. Trying to budget out my build. Bad ass cam!
I have the same trans cooler and my 4l80e runs about 170-180 in the Texas heat with fan off and fan on stays just below 170. No issues
I want it the fluid colder than that! Around 70’s here it’ll still be 160-170. Could be the lines I have. Just some more research on it and some things to try so I can get the temp down
truck is a beast brotha! we have to meet up for a cars and coffee one day
Can we get a sound system video on the Silverado
Do u have drop spindle son the front ?
Looks great
Truck is awesome
Thank you!
awesome man! where is this, port saint lucie?
Hey buddy are you planning to go to Street Car Takeover in Bradenton in a couple weeks? Would be cool to see this thing make a pass!
That's one Bad ass truck
Love the content, im installing the huron speed t6 set up in a 4th gen camaro atm. If love to get the same kit like yours for my 04 AWD Escalade. Who are you using for remote tuner? The 4th gen is on a holley, i have someone for that but i would need someone for the escalade. Some tuner recommendations for the central florida area would be cool if possible
yeah I'm using Elite Tuning on a stock computer! they may also tune on the Holley system !
Nice truck, whats your tire specs?
That area looks like Port Orange Florida...
Do you do ride alongs for your viewers!?
Sure do! Come on by I’ll let you drive it!
truck looks good and sounds good / what size tires are you running in the back and front also thank you for your time
Rears are 295/65/15 and fronts I think are 245/45/20
How are you mounting your harness without a cage?
I like that.
Cool build man...
Whats the wheel and tire specs?
Hey bro what rear brake setup did you use to run them if I can get some info
The 1320 brake 15” conversion!
Question for you, what did you have to change to keep the A/C? Looks like longer lines or something, where did you get them? I have an on3 turbo kit coming at the end of the month and definitely need A/C here in Vegas! Looks and sounds great man!
I dont know who else makes it but from Huron Speed it routes the accumulator away from the exhaust and add some length to the line, it’s tight but so far seems to work!
Thing is beautiful but whats up with the headliner 🦓 🤔
Funny story! Bought the truck with that headliner about 6 ish years ago. At first I HATED it but then I stopped noticing it. So far I did everything else but change the headliner 😂
Where & who tuned your truck, i have a 2014 6.0 with the ls3 heads & truck Norris cam I need a good tune
What cam do you have in your truck? It's nasty
I just got Bosch 210 injectors for my 6.0LS with 88mm turbo. Think that’s overkill?
Rear wheel set up and specs?
Why would it shut off at stop lights? My built 6.0 does the same at times and going in reverse.
In the tune, something needs to be updated, it shouldn’t do it. New tuner and tune haven’t had an issue
@@SiskBuilt awesome. I appreciate it bro. Mines in the shop now getting a high ram intake and Stage 3 btr cam. Can’t wait! Love the truck man
@@S0T210 that’s what’s up! I need that holley high ram but I don’t wanna spend money right now 😂
@@SiskBuilt after that big turbo, i don’t blame you 🤣
Where are you getting the oil feed from if your running a oil cooler aswell?
There is a sandwich plate I’m getting. I’ll make a video on it!
Sisk? Are you on the Treasure Coast?
@@hooknbook911 yes sir!
@@SiskBuilt Would love to see 🐼 in person..makes me wanna build my '07 silvy.
14:40 where is the poosie magnet?
What wheel and tire setup are you running? And did you have to do anything to make it fit?
Those are bogarts ,look for bogarts for silverado
Literally bolted right on!
hows the brakes / vacuum with this cam choice?
@@RSF98 brakes work extremely well!
I like how my pistons are flat top and yours are dished and yet mine are -5cc and yours are -3
are those specs for the pistons right?
@@jacobvanhalteren7452 i think mine were dished with valve reliefs! The -3cc dish!
What cam is that? Sounds mean af
It’s a NA Comp Cam. 235/243 duration!
Hopefully that exhaust leak is not in a place that affects the tune🤔
It’s not! I know where it’s at and it’s after the o2 sensors. After the turbo and everything. Just a down pipe piece that I can’t get to seal all the way
what kind of wheels you got on the back wanna order some for my 1500
They are Bogart racing wheels!
What bed cover is that? I've searched and can't seem to find a low profile like that one
It’s a eBay special from about 6 years ago!
are you running stock driveshaft?
Is this a 5/7 drop?
What cam are you using
what PC are you using for HP tuners?
wheel and tire specs ?
What tire size you running
What do you do for work brother?
I’m a planner for the county!
What’s the rwhp
What tire size
She sounds mean!!!
Thank you!!!!
Is that headliner wrapped in real zebra skin?
0% on the boost controller is equal to waste gate, just an fyi
I currently have a 8 pound spring in there, but 0% on the controller is about 4 psi!
still 3.90 gears?
Yup! Still the same gears!
What size turbo ?
80/96!
@@SiskBuilt Nice!! I’m gonna upgrade to a bw 72 mm turb
Fyi i do Italian tune ups 😂
Whats the hp?
Atleast 300! Hahah
Did you say the driveshaft exploded lol.
If it did hahah I went to a place in town and was joking if it didn’t work
@@SiskBuilt 😂 I guess I missed that part.
Wapoit ioapot boitaso capstoneoit wiopuoitpouast
Wreck it, you won't
Trying not to 😂😂😂😂
Headliner proves he gay
You could have at least picked a nice looking Silverado, not the ugliest of them all, the cat eyed version.
Dude , fix the volume on your video.
What wheel and tire setup are you running? And did you have to do anything to make it fit?
The rears are an off the shelf 15x10 by bogart and the fronts are a different offset to clear the 2020 front brakes!
Are the fronts 17s or 18s? I have 2020 brakes on mine and some 17s fit and some don't it's super weird. @@SiskBuilt