It definitely makes a huge difference on who’s in the building….. when Miracle Pressure Wash is there It WILL BE CLEAN WHEN THEY EXIT, top to bottom, side to side….. Mr. Gordon EXCELLENT job, Sir, EXCELLENT job.
Hey I just started pressure washing and I have a question for you. What do you do when you’re pressure washing an area with bad drainage that starts puddling up with the dirty water? I’ve already noticed this at a couple of jobs and it slows me down a bit, then once the puddle dries up, the dirt dries back on the surface that was just cleaned. Is there something better than using a squeegee or deck brush? Thanks
I just had that problem bad I actually had to go back the next day. But that’s one thing you have to figure out on the job it’s nothing you can do but keep pushing out some kind of way
@@miraclepressurewashing2319 hey I appreciate the response! It’s something I never had even thought about until it happened lol. Great content though man!
There are a couple options depending on budget. You can get a pump at a home goods store and rig it up with some tubing to clear the area if you have the money to spend and the knowledge to set it up correctly. Some guys use a leaf blower . Personally, I’d say it’s a skill issue. Learning how to “sweep” with a white tip or a turbo nozzle and getting a technique down to push water uphill is a great first option since you already do it as part of your rinse.
Nice video. It looks like you had surfactant in the pre-treat with all those suds, but if you weren’t using surfactant, why couldn’t you post-treat with the x-jet too?
Great video thank u liking amd subscribing. Did u use the customer water to Fill up Your tank or does the hose go directly to ur pressure washer? I do mobile detailing and have 100 tank but the pressure washer is connected to tank. I guess i dont want to have to disconnect and connect every time. Should i just use the tank and make sure its filled with water so it doesn’t put air in my pressure washer thanks in advance.
Sorry brother I missed 2 videos my mom has been sick so I have been talking care of her . But as always I truly appreciate your videos every thing came out looking great brother 💯👍 Much Love
Take care of mom Cj this video not that important I appreciate you as always CJ God bless you and the family and I pray that mom is ok and healed and made whole 🙏🏿 take care of her cause we only have 1. Get well mom from Miracle Family
It took me about a year and a half to get my equipment to where I wanted it to be and you just have to stay consistent with everything and be serious. This is not a business that you can do just for the cash you have to really love doing this
Nice video bro. When using my pump sprayer, the SH mix dries up too quickly from the sun in like less than 5 minutes. On concrete. Do you have this issue with the x jet? No right?
Ok. I have 1 gallon of Sh 12.5% in a bucket. I drop my X Jet and start up my washer. What % comes out? Can I get 4% ? I’m a total beginner. Can you help?
Great video. My 1st full year in the pressure wash business. I will be checking out your videos. I need to learn from you professionals. Keep up the good work and Make That Money.
with x-jet , you put an insert or proportioner into the xjet to make the hole smaller when sucking up or downstreaming the mix from the bucket into the stream, the proportioners are colorized pieces of plastic basically and im gonna guess that he used the black proportioner for his 8gpm pump which is the proportioner that is 11 to 1 water to chem dilution, so thats 12.5% divided by 12 which is 1.04% SH at the gun nozzle if im right about the pump and proportioner. But i have no idea honestly, i wonder what he used now. I was scared for the plants , im like oh sheet he gonna get a call back, wet that sheeet down cuz haha but he said he did here in the comments haha so it's all good then. phew
No I don’t watch more of my videos i say it all the time.. It’s sodium hypochlorite SH 12.5% be careful how you use it and never use it straight. God bless like & subscribe
Hi, Had a question about the X-Jet system. How much (SH) did you use in the 5 gallon? Did you have to dilute or was it straight inside the 5 gallon? What was the percentage you had when applying to the concrete?
@Miracle Pressure Washing So, are you running an 8 gpm? I ask because I'm using an 8 gpm with the X-Jetsystem. The X-Jet dilution chart states 3:1 with no tip using an 8.0 gpm. Is this the correct math? (3:1) = 4 12.5% (SH straight) ÷ 4 = 3.125 If I use 10% (SH) (3:1) =4 10% (SH straight) ÷ 4 = 2.5
I don’t know about all the math to be honest I just use it with my 4gpm on x jet and I don’t let it stay on long 2 to 3 minutes and I’m raising. But I don’t use that anymore that was a long time ago
@@miraclepressurewashing2319 do you run both together in series to have 12 gallons per minute is that possible and why do you have a 4 gallon per minute and not another 8 gallon per minute sorry for asking I new and try to get it better understanding
@@miraclepressurewashing2319 thanks for the response my dude, these other people that make videos are so selfish and won’t share ANY information to people trying to start up unless you pay $400+ for their “class” it’s crazy how greedy the world has gotten but love that you’re a godly man! Great to see people succeeding!
@@miraclepressurewashing2319 absolutely! If you don’t care to answer, how much do you dilute your sh when using the xjet or does it have like adjustments built in? I’m going to order one till I can get everything together for a proper one
That algae was as thicc as my ex-wife! That’s right; you must be flexible, have different equipment for different jobs. It can be good not to have many jobs lined up. It makes us rely on the Lord on a daily basis. 🙏🏼 God over everything! 👍🏼💰💪💯
I love to see a fellow black man work for himself it’s motivation
Let’s go 💪🏾💪🏾🙏🏽🙏🏽
OMG you are so racist dude WTF
Any man really
@@LaGardunoTHATS right!
@@terryallard1918 if you really meant ANY man, you wouldnt care if it was specified for context.
It definitely makes a huge difference on who’s in the building….. when Miracle Pressure Wash is there It WILL BE CLEAN WHEN THEY EXIT, top to bottom, side to side….. Mr. Gordon EXCELLENT job, Sir, EXCELLENT job.
Wow this is why I do it thanks so so much I appreciate the love and support from my people. Thanks and God bless
Praise YHWH!! Love and blessings to the MPW family!! Keep working them miracles my brother!! Beautiful work
🙏🏿🙏🏿 if God allowing me I’m rocking and rolling thanks Charles God bless you man and I appreciate you as always
I like the simplicity and afficiency of your work flow thank you for the great video and be blessed JP
Thanks for the support God bless JP 💪🏿🙏🏿
Love the honesty with you, It shows the real work that it takes to start a business drom the bottom.
I have to be no use to miss leading people. Thanks for the support and love God bless
Right! I dream to have a set up like him I’m getting there, I’m about to get a Xjet until I can build an actual soft wash system
Keep grinding man sorry I just saw this
You are a hustler. You do everything. Much respect.
Much love man I try I just keep going no stopping. God gets all the glory for allow me to do what I do🙏🏿
Did you do anything to treat the grass? No damage done by the mist and over spray, im always paranoid as hell when pre treating with my xjet
Yes forgot to show it always wet everything down
I like how positive and a hard worker you are. Nice set up.
Thanks God bless 🙏🏽
your faith is contagious. much love.
Amen amen amen 🙏🏾
You need a Hudson float valve to keep from the overflowing tank and the back and forth to the faucet
What soap / surfactant are you using? Nice suds easy to see.
I was actually using Dawn back then.. Thanks and God bless 🙏🏿
I noticed that when you sprayed that sh some of it went to the grass, did you have to rinse it right away or how do you protect it from dying?
It’s a light percentage it want kill anything
With roofs, the best is softwash due to how hot you can make the mix. Trough batch or by manifold.
Do you just put pure bleach in the container or what's the ratio with water
Straight SH
Hey I just started pressure washing and I have a question for you. What do you do when you’re pressure washing an area with bad drainage that starts puddling up with the dirty water? I’ve already noticed this at a couple of jobs and it slows me down a bit, then once the puddle dries up, the dirt dries back on the surface that was just cleaned. Is there something better than using a squeegee or deck brush? Thanks
I just had that problem bad I actually had to go back the next day. But that’s one thing you have to figure out on the job it’s nothing you can do but keep pushing out some kind of way
@@miraclepressurewashing2319 hey I appreciate the response! It’s something I never had even thought about until it happened lol. Great content though man!
There are a couple options depending on budget. You can get a pump at a home goods store and rig it up with some tubing to clear the area if you have the money to spend and the knowledge to set it up correctly.
Some guys use a leaf blower .
Personally, I’d say it’s a skill issue. Learning how to “sweep” with a white tip or a turbo nozzle and getting a technique down to push water uphill is a great first option since you already do it as part of your rinse.
Does the SH kill the plants and grass around the walkways? How do you prevent that from happening?
Yes it will if your using a strong % Water everything down good and that will help prevent it.. God bless
What % SH DID YOU USE IN THE POST TREATMENT. You said you used a sprayer/ knapsack to apply to the concrete.
Thanks for your honesty.
About a 3% and your welcome that’s all I know keep it real
Thank you again . Your openness to share stuff like this has got you another subscriber from Ireland 🇮🇪
Nice video. It looks like you had surfactant in the pre-treat with all those suds, but if you weren’t using surfactant, why couldn’t you post-treat with the x-jet too?
14:22 I edged a guy's driveway, and mine, with the turbo nozzle. Worked amazing😂 I dug a post hole with it too. Saved my back
💪🏿💪🏿💪🏿
Hey bro! Are u rinsing with a ball valve?
Yes sir
I love this great job my dude. I got my first contract and trying
To get more
Keep going it will come just stay consistent 🙏🏾
Modify that Xjet. You will love it. Doug Rucker has a video on that. Good job there!
Ok thanks man I don’t really use it anymore but i appreciate that. God bless
Good video. I'm just starting out so softwash system. What did you have attached to your hose at the end when you were rinsing off?
It’s a ball valve
I'm using a 4g pump sprayer to pre treat driveways. Dig the information
@@lonnied.585 let’s do it
How quickly do you go through that 5 gallon of pre mix with the xjet? Is it diluted or is it straight SH?
@@Rinse_and_Shine it can do a full small house. No straight SH
Hudson float valve to stop the water from over filling.
Thanks so so much man I really don’t care about that part maybe later I may. But I really do appreciate you
No problem brother. it’s 50-60 bucks for everything you need. Well worth the investment so you don’t gotta worry about it. Good luck get that money 💪
Ok ima look into that send me a link.. Thanks again man
Where did you get your shirt? Need some!
72hour print
@@miraclepressurewashing2319 thanks brother, hope our paths cross on this journey!
Did you rinse the plants and grass before applying SH brother?
Yes sir
Everyday is a hustle. Facts 💯
Got to in order to make it
How did you stop the SH from killing the grass along the walkway?
Wet everything down I didn’t record that part but yes wet everything down
What Percentage of bleach that you're using.
@@zayhonda04 downstreaming is like 1.5%
Great video thank u liking amd subscribing.
Did u use the customer water to
Fill up
Your tank or does the hose go directly to ur pressure washer?
I do mobile detailing and have 100 tank but the pressure washer is connected to tank. I guess i dont want to have to disconnect and connect every time.
Should i just use the tank and make sure its filled with water so it doesn’t put air in my pressure washer thanks in advance.
Yes I use Customer water and yes the pressure washers are hooked to the tank.
Thanks for supporting and love God bless you
@@miraclepressurewashing2319 thank u!!
How do u make sure that chemical doesn’t kill grass?
Wet it first and use a low percentage
Miracle pressure in the building!!! Cleaned that up real nice
In the building God over everything thanks Kobe
What’s your mix ratio and chem you use with the x jet?
Like 3%
Sorry brother I missed 2 videos my mom has been sick so I have been talking care of her . But as always I truly appreciate your videos every thing came out looking great brother 💯👍 Much Love
Take care of mom Cj this video not that important I appreciate you as always CJ God bless you and the family and I pray that mom is ok and healed and made whole 🙏🏿 take care of her cause we only have 1. Get well mom from Miracle Family
Prayers for your mother my brother!! May the divine healer make her whole again in YHWHSHWA name I pray!!
💯💯💯💯💯💯YOU SPOKE STR8 UP TRUTH HOMIE.....KEEP MAINTAININ CHAMP...GET DAT MONEY MANE....ONE LOVE FROM L.A CALI HOMIE
Thanks man I appreciate that I don’t know another way but the truth. One love from Florida homie stay up God bless
Nice work bro I been watching and liking it vids all week. You work just how I work . Keep the faith and keep grinding bro ✊🏾
Man this was right on time cause I was just saying I wonder if people really watch my videos 🤔 thanks for the support and love God bless
Cleaned up nice man! See you around when we get started. Favor go before you and prosper along the way!
Thanks man I appreciate you and God bless you to and favor and prosperity all over your life 🙏🏿
May God bless you bro. Keep up the hard work and KEEP GOD FIRST!!! much love
Thanks so much well needed and that means a lot. God bless you.. 🙏🏿
Just came to your page im trying to get started how long to get your equipment up and how was it started out
It took me about a year and a half to get my equipment to where I wanted it to be and you just have to stay consistent with everything and be serious. This is not a business that you can do just for the cash you have to really love doing this
@miraclepressurewashing2319 yea I been searching equipment and been getting lil bit by lil bit
Grate video!! Question I thought down streaming could pre treat. Why not?
It could and thanks…
I am joining your channel buddy. Thanks for the honesty and keep it real.
Thank you for joining God bless
Hey man! What proportioners are you using for concrete? What about siding? Or are you pulling straight SH
Down-streaming everything a less it bad then I pull out the softwash system. But I’m mostly downstream everything partner.
Nice video bro. When using my pump sprayer, the SH mix dries up too quickly from the sun in like less than 5 minutes. On concrete. Do you have this issue with the x jet? No right?
I don’t allow no Sh to sit no longer then 2 to 3 minutes I do sections
Good stuff man. Great content. Appreciated. Is that only SH in your downstream mix? Look like theres soap or surfactant in their too?
Yes it has surfactant in it
Ok. I have 1 gallon of Sh 12.5% in a bucket. I drop my X Jet and start up my washer. What % comes out?
Can I get 4% ?
I’m a total beginner. Can you help?
You will not get 4% from downstreaming. You will need a softwash System to get that.
@@Mikkifikki13 more like 1 or 2
brother whats the chemical mix on that?
@@ETNASES straight SH
Great work as always! Do you run thr xjet wide open with no proportioner in it?
Thanks bra and no I don’t
Great video. My 1st full year in the pressure wash business. I will be checking out your videos. I need to learn from you professionals.
Keep up the good work and Make That Money.
I’m here let’s do it you got this man just stay consistent and active and it will get greater later
@@miraclepressurewashing2319
You know it. Have a blessed evening. Thanks so much
Love this video!
I know you use SH, but do you put any other chemical in the X-JET with the SH? like surfactant? What do you use?
Dawn. Thanks God bless
Hi I have a company in Kuwait and would like to learn from you
Ok just let me know how can I be a help to you
Nice. How a person speaks is really noticed by customers. Nice property
That’s right man. Thanks for tuning in God bless. Make sure you like share and subscribe
How did you mix your sh batch. Did you use surfactant?
Just add surfactant and the SH is straight
@@miraclepressurewashing2319 what percentage is the xjet putting out
with x-jet , you put an insert or proportioner into the xjet to make the hole smaller when sucking up or downstreaming the mix from the bucket into the stream, the proportioners are colorized pieces of plastic basically and im gonna guess that he used the black proportioner for his 8gpm pump which is the proportioner that is 11 to 1 water to chem dilution, so thats 12.5% divided by 12 which is 1.04% SH at the gun nozzle if im right about the pump and proportioner. But i have no idea honestly, i wonder what he used now. I was scared for the plants , im like oh sheet he gonna get a call back, wet that sheeet down cuz haha but he said he did here in the comments haha so it's all good then. phew
It’s a miracle, and you are a miracle worker❤
Thanks I do my best but I give God all the glory cause he allows me to do it all 🙏🏿🙏🏿 God bless you and your family
@@miraclepressurewashing2319 You are truly a blessing and inspiration. Keep crushing!!!!!!!!!!
Keep doing your thang bruh!
Thanks God bless
Hey man, where can I get that container for the chemical?
I get mine from the pressure washing store in Orlando
Do you mind telling what chemicals you use?
No I don’t watch more of my videos i say it all the time.. It’s sodium hypochlorite SH 12.5% be careful how you use it and never use it straight. God bless like & subscribe
Hi,
Had a question about the X-Jet system. How much (SH) did you use in the 5 gallon?
Did you have to dilute or was it straight inside the 5 gallon?
What was the percentage you had when applying to the concrete?
Straight SH
@Miracle Pressure Washing
So, are you running an 8 gpm?
I ask because I'm using an 8 gpm with the X-Jetsystem.
The X-Jet dilution chart states 3:1 with no tip using an 8.0 gpm.
Is this the correct math?
(3:1) = 4
12.5% (SH straight) ÷ 4 = 3.125
If I use 10% (SH)
(3:1) =4
10% (SH straight) ÷ 4 = 2.5
I don’t know about all the math to be honest I just use it with my 4gpm on x jet and I don’t let it stay on long 2 to 3 minutes and I’m raising. But I don’t use that anymore that was a long time ago
@@miraclepressurewashing2319what do you use now?
@@michaelc7283have you figured out how to dilute to a desired ratio?
Nice work Bro from the Uk 🇬🇧
That’s what I’m talking about s/o to the UK i appreciate you man God bless and thanks for the support that means a lot to me. LETS GO 🙏🏿💪🏿
@@miraclepressurewashing2319 👌🏻👌🏻
Bro for concrete cleaning. Do use just SH? What soap you use
Dawn soap
@@miraclepressurewashing2319 greatly appreciated it
Anytime bra
What gpm is that psi washer
lol it’s a 8gpm and I have a 4gpm
@@miraclepressurewashing2319 do you run both together in series to have 12 gallons per minute is that possible and why do you have a 4 gallon per minute and not another 8 gallon per minute sorry for asking I new and try to get it better understanding
Did you pre-wet the grass and plants? Not criticizing just curious.
Always do it to be safe sir
@@miraclepressurewashing2319 absolutely you just didn’t show it so wasn’t sure
Great video regards from Ireland 🇮🇪
Thanks so so much
Salute to tha Brotha Man✊🏿
💯 God bless you
Good content. Stay in the hustle dude.
Thanks so so much I appreciate you God bless you and your family 🙏🏿
Where can I get an xjet and fast
g.co/kgs/vxrCSD Florida Pressure Washing & Equipment Orlando that’s where I go I don’t know where you at
why is the stuff so white?? is that surfactant?
Yes it’s soap
What ratio tip did you use?
Just being honest I don’t remember. Sorry about that I only use that one how it come o never switch anything so I don’t know.
Good job brother. Sending love.
Sending blessing back to you 🙏🏿
@@miraclepressurewashing2319thanks.
You can post treat with x jet , just use straight sh I do it all the time with no problem sir.
Ok thanks
God first amen. Looks like you are doing great.
Thanks so so much God bless you
What surfactant do you use?
You can use Dawn
@@miraclepressurewashing2319 thanks for the response my dude, these other people that make videos are so selfish and won’t share ANY information to people trying to start up unless you pay $400+ for their “class” it’s crazy how greedy the world has gotten but love that you’re a godly man! Great to see people succeeding!
I know it’s crazy but push on you got this. God bless you
@@miraclepressurewashing2319 absolutely! If you don’t care to answer, how much do you dilute your sh when using the xjet or does it have like adjustments built in? I’m going to order one till I can get everything together for a proper one
@@Drippy_dripster I don’t dilute it
Easy Sub, Binge watching this whole ass channel rn
Thanks man I really appreciate the love and support. Thanks and God bless
Looks like lake Jodeco area...
Windermere
Ok not familiar I live near lake Jodeco looks familiar.
Keep it up black king
Thanks so so much
Great work!
Thanks i appreciate you God bless
Nice work bro. Question. What Percentage SH did you use
It’s about a 1.5% it’s mix through through the system
Looks great! Keep grinding 😀
Thanks fam 🙏🏽💪🏾
Awesome video! Thank you!
Awesome anytime God bless you keep grinding
I love your videos bro
Man thanks that’s well needed to keep me going. Thanks again and Jesus loves you ❤️🙏🏿
I like that intro.
@@sterlinghousewashpressurew9594 thanks so so much God bless
Nice work bro
Thanks bra I appreciate you God bless and have a great Memorial Day 🙏🏿
Awesome video brother!
Thanks so so much man i appreciate you God bless
Keep Grindin 🙏🏼
Thanks
Nice Job!
Thanks God bless
Good call using blower 🥇
Yes sir it’s a good way to do it. Thanks for watching man God bless follow like & subscribe
I’m trying to learn from the best , there about 4 brothers on here who have great content . Salute 🫡 from California
Thanks man that’s big to me I really do put my heart in this. I appreciate the love and support David keep grinding
Looks great 😎👍👍
Thanks so so much Pedro God bless
Great job
Thanks so so much God bless
Get a Hudson shut off valve !
I don’t really use it anymore but thanks God bless
💯💯💯💯💯💯
Thanks and God bless
Agreed,,,, GOD is Good....
All the time stay bless and safe 🙏🏿
@@miraclepressurewashing2319 You too bro,,,,
I needed to see this video!!! You lit a fire under my ass. Good shit. Thank you.
Great I hope it helps. Follow like subscribe
You are a cool dude.
Thanks man I appreciate that. God bless
You pressure wash cars
Yes I do cars Mike
@@miraclepressurewashing2319 is it a technique doing cars with a pressure washer
May Allah (God of Abraham) bless you brother.
Amen brother same to you Jesus loves you
👍👍👍👍👍😁❤️❤️❤️❤️❤️❤️❤️
Thanks for the support God bless
That algae was as thicc as my ex-wife! That’s right; you must be flexible, have different equipment for different jobs. It can be good not to have many jobs lined up. It makes us rely on the Lord on a daily basis. 🙏🏼 God over everything! 👍🏼💰💪💯
Think as your ex wife 😂 Bill Bill Bill. God bless you man 🙏🏿🙏🏿
🤣🤣🤣🤣🤣
@@charlesd6121 Bill crazy
Rodriguez Lisa Brown Linda Brown Michael
Jones Frank Taylor Linda Moore Richard
Thanks for following the channel God bless