Thank you very much for doing this video! This might have made me fix my own P2453 and P2452 codes on my 2013 Swift 1.3 ddis. I think i have an faulty sensor, but will have to double check. My car has got 110 000 km (68000 miles something). Is there any way of manually doing a DPF regen, or do you have to have the tools and software of a workshop? Would staying above 3500 rpm's at speed do anything, or just a serious risk of doing more damage than good? I used to do short trips before (less than 15 min), but the last year or so Ive been driving at highway speeds for about 20-30 min each trip i do. Figure the DPF would have been cleaned/burned all the gunk off?
Had dpf code come up so did static regen at 3450 for 15 minutes until successful registration complete and cleared code cars was fine for a couple days now light back on so is the sensor the next port of call
Frequent grey smoke from exhaust,coinciding with fans running. No dpf warning or engine management lights on dash. Appears to be regenerating,wondering what to check. Get a buzzing/ farting noise from rear of engine,when engine is turned off. Any ideas what to check.
Should you get a pressure reading from both pressure pipes going to the dpf? As I'm only getting a reading from one pipe, the other isn't showing anyyhing even when revved
hello, any of you who own this car model have had to deal with a kind of sucking noise only when the engine is cold? the noise is generated when the gas pedal is released and the sound is similar to a very fast creaking, it when the engine is cold and when the dpf regenerates. once the car is hot or the regeneration finishes, it no longer does so. does anyone have this problem?
Thanks a lot mate, very helpful indeed
Just what I needed thanks
Hi Richard
Great video.
Can I ask you where you got your break out box and leads from .
Regards ian
Thank you very much for doing this video!
This might have made me fix my own P2453 and P2452 codes on my 2013 Swift 1.3 ddis. I think i have an faulty sensor, but will have to double check. My car has got 110 000 km (68000 miles something). Is there any way of manually doing a DPF regen, or do you have to have the tools and software of a workshop? Would staying above 3500 rpm's at speed do anything, or just a serious risk of doing more damage than good? I used to do short trips before (less than 15 min), but the last year or so Ive been driving at highway speeds for about 20-30 min each trip i do. Figure the DPF would have been cleaned/burned all the gunk off?
got a p250f , any ideas swift 1.3ddis
Had dpf code come up so did static regen at 3450 for 15 minutes until successful registration complete and cleared code cars was fine for a couple days now light back on so is the sensor the next port of call
Where are you based?
Just who I need to look at my 2013 diesel swift., codes P1206 and P 2453
Frequent grey smoke from exhaust,coinciding with fans running.
No dpf warning or engine management lights on dash.
Appears to be regenerating,wondering what to check.
Get a buzzing/ farting noise from rear of engine,when engine is turned off.
Any ideas what to check.
Should you get a pressure reading from both pressure pipes going to the dpf? As I'm only getting a reading from one pipe, the other isn't showing anyyhing even when revved
No, lower outlet is after DPF, pressure there would indicate an exhaust blockage
hello, any of you who own this car model have had to deal with a kind of sucking noise only when the engine is cold? the noise is generated when the gas pedal is released and the sound is similar to a very fast creaking, it when the engine is cold and when the dpf regenerates. once the car is hot or the regeneration finishes, it no longer does so. does anyone have this problem?