Mercedes Rear SAM

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ต.ค. 2019
  • SAM stands for Signal Acquisition Module. A SAM module (also called Signal Actuation Module) receives data from sensors, switches, and controllers, and can send data, actuate (activate) components and monitor systems. Mercedes-Benz has been using SAM modules since the mid-90s.
    Support the Channel - get your parts from Amazon
    SLK 230 Rear Brake Rotors - amzn.to/30SKOYM
    SLK 230 Front Brake Rotors - amzn.to/2nnckjz
    SLK 230 Radio Removal Keys - amzn.to/316zeKT
    SLK 230 Radio Replacement - amzn.to/2LClbpH
    ml350 2006 fuel pump - amzn.to/2HfIEM1
    Fuel Pump Locking Ring Tool - amzn.to/2KDTtcW
    High-Temperature Gasket Sealant - amzn.to/2KIhQGw
    Power Steering Fluid - amzn.to/2LRYmRF
    Mobil 1 Synthetic Oil - amzn.to/2LKpxNZ
    Mercedes ML350 Oil Filter - amzn.to/2LLqkOB
    Mercedes Transmission Fluid - amzn.to/2K0nR0U
    Mercedes Diagnostic Tool - amzn.to/2MnmcEf
    Mercedes Auxillary Battery - amzn.to/2SRm6WE
    Mercedes ML350 Fuel Pump - amzn.to/2Krrv3X
    Mercedes Fuel Pump Cover Removal Tool - amzn.to/33kJG2G
  • ยานยนต์และพาหนะ

ความคิดเห็น • 66

  • @illwills
    @illwills 4 ปีที่แล้ว +2

    Thx for video Keith Salute. Your video on using your key when you have remote problems worked for me this weekend. Your greatly appreciated. Keep up the good work.

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว

      illwills, glad to hear it. What's going on with, the remote, low battery?

  • @grizzflowers2522
    @grizzflowers2522 4 ปีที่แล้ว +3

    Mr keith thank you so much you have been a great help to me with my ml 350 appreciate your help

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว +2

      Glad to hear it. Have a great day!

  • @carolynekeeler
    @carolynekeeler 4 ปีที่แล้ว +1

    Your videos are amazing! I’ll make sure to use your site for Amazon purchases ;)

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว +2

      Glad you're finding the videos helpful. I appreciate the support.

    • @williamchadd3100
      @williamchadd3100 4 ปีที่แล้ว

      Contact John expert in all kinds of Mercedes Benz programming or repairing. He charges less and work perfectly... hes the only one ever touched my car... John +44 7534018376 WhatsApp or email jmorg0707@gmail.com

  • @barrlee53
    @barrlee53 2 ปีที่แล้ว +2

    Great info video. I read this question asked with no answer. I have a bad rear SAM module, will that device help me program the replacement SAM? Thanks

  • @VitiatedsHOWTO
    @VitiatedsHOWTO ปีที่แล้ว

    I need to be able to reprogram one for my GL450

  • @JoseGomez-sh8oy
    @JoseGomez-sh8oy 3 ปีที่แล้ว +1

    What would it mean if voltage at terminal 30(1) 30(2) are low. Car cranks but doesn't start

  • @josefrias6366
    @josefrias6366 2 ปีที่แล้ว

    thanks for the video, i have the same problem with my trunk on my GL450 that the rear end door handle doesn´t open properly, i changed the latch hardware and the problem remains, it could be a bad SAM?

  • @jhamiltonsmythe
    @jhamiltonsmythe 3 ปีที่แล้ว

    Great series of Mercedes fixit tips! I just bought an i980 icarsoft code reader and this tutorial was a great help in using it to its potential.Many thanks.

  • @IntroIsaac
    @IntroIsaac 4 ปีที่แล้ว +3

    Does this allow you to program those settings or is that something that you’d have to take to a mechanic with a Star DAS?

    • @oscarduarte2220
      @oscarduarte2220 2 ปีที่แล้ว +1

      Hello my name is Oscar. My question is why my seat is not working on Mercedes-Benz 2007 gl 450. Please

  • @JaylaAnthonyDIVO
    @JaylaAnthonyDIVO 3 ปีที่แล้ว

    I have same identical vehicle. 2008 ML350.... will that scanner diagnose if a one of the SAM modules is completely out? Fuses relays. My tail lights stay on, alarm on and with gas gauge malfunctioning sitting at zero.

  • @jamesalamo8580
    @jamesalamo8580 4 ปีที่แล้ว

    Good video I problem my gl 450 stares but in 5second cut off

  • @marklitvinsky9596
    @marklitvinsky9596 ปีที่แล้ว +1

    I have a 2021 GLS450
    I installed heated/cooled cup holder instead standard cupholder.
    Connected wires to positive, negative and rear SAM( plug just with 3 wires)no more addition wires. Cup holder doesn’t work(I have 2 brand new cup holders, problem not in cup holders)brought to dealer and they said no any function in there scanner/computer to activate cup holder.
    Any suggestions ?

  • @radunemesniciuc2113
    @radunemesniciuc2113 2 ปีที่แล้ว

    Hy, can you recode the rear SAM with iCarsoft for upgrade tail lights from 2007 to LED tail lights from 2013

  • @fitimgashi8579
    @fitimgashi8579 4 ปีที่แล้ว

    Hi Keith I have a Ml 350 2006
    I have trouble when I start the engine
    When I put the key on number 2 position the lights on the dash goes off and the car won’t turn it loose the power I have to take the key out and try couple times than it works
    Is that a key problem or ignition?

  • @cockycarguylswayne2211
    @cockycarguylswayne2211 4 ปีที่แล้ว

    Im not getting power to the rear sam s55 AMG 04 i moved rear sam and battery was still connected foolish mistake but when i jump the rear sam from the battery it works fine car start right up can you please help me

  • @enuks1
    @enuks1 4 ปีที่แล้ว +1

    Hello Keith i am a big fan of your work and i own a Mercedes GL450 2008 model . My Doors central locks open when am driving and the trunk tailgate only opens automatically but doesn't close automatically. could it be a faulty Rear SAM

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว +1

      The doors unlocking sounds like some funky SAM behavior. The trunk not closing may be related but might also be the hydraulic mechanism acting up. I would definitely start by looking for DTC errors in the SAM modules.

  • @willieurus
    @willieurus 4 หลายเดือนก่อน

    Wow would this device be able to see what is possibly draining battery over night by checking the rear and front Sam see what reads on or don’t work that way ?????

  • @richardgubac6284
    @richardgubac6284 3 ปีที่แล้ว

    Where can I find the TCM in my 2006 ml350?

  • @hanial-shadadi9122
    @hanial-shadadi9122 3 ปีที่แล้ว

    That means the front seats control is not from Rear SAM. My m 350 2006 both front seats are not working. This happend suddenly yesterday. Plz guide me what i should do. Regards

  • @ronaldweeks2245
    @ronaldweeks2245 3 หลายเดือนก่อน

    Rear window screen not working on 2008 E350. Is there a fuse

  • @Victor-gw7si
    @Victor-gw7si 2 ปีที่แล้ว

    Can I reprogram new Sam module with that type of scanner?

  • @amybrown3131
    @amybrown3131 4 ปีที่แล้ว

    Good Morning Keith, What's the best scan tool for clearing codes on a Mercedes? I have a 2006 ML500 and it is always putting out malfunction codes.

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว

      The best one is three Star Diagnostics but it's also the most expensive and the most complicated to use. To clear OBD related codes any old scanner will work. To clear Mercedes specific DTC codes including ABS, Airbag codes etc. I use the carsoft scanner.

    • @glasser2819
      @glasser2819 4 ปีที่แล้ว

      Clearing codes is only a fix for random secondary faults.
      Recurent DTC's need to be addressed to regain sanity.
      Every fault needs studying 😅

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว

      @@glasser2819 100% correct. I hope i did not give the impression that we should just clear codes. Let's fix the problem, or the codes will just reappear.

  • @leodavis7524
    @leodavis7524 4 ปีที่แล้ว +1

    Great channel
    Can’t get the brake wear message to stop showing up every time I start my GL320, will reset but comes back when restarted
    Sensors are removed and wires tied together, but did the same with wear indicators installed..Help
    Leo

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว +1

      Sounds like a bad harness. Did you hook up a scanner to see if it's front or rear?

    • @leodavis7524
      @leodavis7524 4 ปีที่แล้ว

      iRepair Autos
      Did hook up a scanner, really didn’t know what to look for..
      Thank you for your quick response.
      Leo

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว +1

      Which scanner? If it's a carsoft then i can help

    • @leodavis7524
      @leodavis7524 4 ปีที่แล้ว

      iRepair Autos it is a car soft ..
      Thank you

  • @user-vr4vb6ge7b
    @user-vr4vb6ge7b 4 ปีที่แล้ว +1

    Hello! Tell me you had to change the fuel injectors?

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว

      I have a video in the channel that shows how to do this: th-cam.com/video/JEMq1b73d0s/w-d-xo.html

  • @janitaayche3635
    @janitaayche3635 4 ปีที่แล้ว +1

    Hi Keith can you make a video on how to remove REAR SAM MODULE?

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว +2

      Ok, I'll put that on the list.

    • @janitaayche3635
      @janitaayche3635 4 ปีที่แล้ว

      @@iRepairAutos thank you.

    • @grizzflowers2522
      @grizzflowers2522 4 ปีที่แล้ว +2

      Yes please mr keith rear sam module removal thank you

    • @steveDENENBERG
      @steveDENENBERG ปีที่แล้ว

      How do you open that rear Sam module to clean it would be a great video that’s the hardest party I think

  • @douglundy5755
    @douglundy5755 4 ปีที่แล้ว

    have a bad rear sam showing on my foxwell tester, very interested in this information. Thanks

    • @douglundy5755
      @douglundy5755 4 ปีที่แล้ว

      did not help with my sam issue, Id like to know how to replace or repair it. causing a few malfunctions..

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว

      What's yours doing?

    • @douglundy5755
      @douglundy5755 4 ปีที่แล้ว

      @@iRepairAutos I have a scanner that shows a rear Sam error. One symptom is the right tail light does not come on. The windshield wiper sprayer also does not work. May or may not be the result of the bad Sam.

    • @joeruiz784
      @joeruiz784 4 ปีที่แล้ว

      I have. A 09 S550 lights on no crank or start

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว +1

      What error codes do you have? Is the drive authorization activated? What diagnostic scanner do you own.

  • @nelsondacutanan4864
    @nelsondacutanan4864 ปีที่แล้ว

    Hello sir i have a problem in my ml 350 fuel level sensor short circuit to battery .. what would i do ?

  • @kanwaljitsingh9553
    @kanwaljitsingh9553 4 ปีที่แล้ว

    Greetings iRepair autos, my 2008 ML350 L/F door lock and power window not working at all. Have already replaced door lock actuator and window master switch. Any feedback will be greatly appreciated.

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว

      Check the power to the switch and lock. The icarsoft scanner does this. Also check the fuse and relay for the door.

    • @kanwaljitsingh9553
      @kanwaljitsingh9553 4 ปีที่แล้ว

      iRepair Autos fuses are ok. Are the door locks controlled by rear Sam or door control module? Thanks

  • @hitzoneproductions7858
    @hitzoneproductions7858 2 ปีที่แล้ว

    Can this one reprogram?

  • @nor3134
    @nor3134 3 ปีที่แล้ว

    How much to replace

  • @angrycatowner
    @angrycatowner 3 ปีที่แล้ว

    This a great video. But how to program a new SAM unit to be a replacement.

    • @nor3134
      @nor3134 3 ปีที่แล้ว

      Did you get a price

    • @angrycatowner
      @angrycatowner 3 ปีที่แล้ว

      @@nor3134 About $200 at the local MB dealer.

  • @leewright9905
    @leewright9905 4 ปีที่แล้ว

    I have '03 E320, my left brake light not working. Could be bad sam unit. Will this tester reset the light or could sam be bad?

    • @iRepairAutos
      @iRepairAutos  4 ปีที่แล้ว

      it could be a burnt out contact point on the light housing assembly. There is a upgrade wire kit for this. I have a video on this replacement here: th-cam.com/video/1thMN_vUjzI/w-d-xo.html

  • @clarencedavis4517
    @clarencedavis4517 5 หลายเดือนก่อน

    Glk350. Have a newer (than i980) model icarsoft. Hope this works!

    • @iRepairAutos
      @iRepairAutos  5 หลายเดือนก่อน

      What year GLK?

    • @clarencedavis4517
      @clarencedavis4517 5 หลายเดือนก่อน

      @@iRepairAutos 2015 base rwd.