I've just taken a look at the files and it simply wouldn't be worth trying to produce this for sale - the problem is the print time it would take about 24 hours to produce one and mean you have to sell it for more than you could buy an elite headset for.
@Ball Cat you clearly didn't understand me. there are online printing services that will print the parts for you. So, yes 3D printers are $200+ and be expensive to own one. It doesn't mean you have to own one to have it printed.
Big tip in my country almost all libararys have 3d printers now a days that you can use fairly cheap also there are a few online services etchy is a good place to find them.
@@daveyonthedaily9525 Meh, I have two spools of the plastic so Im assuming thats going to make like idk two only or something but you also need like a cushion and it would take time but yeah sure maybe if I can and If I figure out to then sure.
@@office_desk one spool of 1 kg would be enough for about 2 straps and it takes between 30 and 40 hours to print depending on your printer and print settings using custom supports makes it even better. (this is all acording to my slicer cura with the recomended settings on thingiverse didn't print it myself yet.)
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@@Mistiguss Hey! Did you ever make one of these for yourself? I'm here like a year late and the file has since been taken down so I'm wondering if you'd happen to have it
I just finished printing this Headset, it took 2 1/2 days. It is pretty cool and fits the Quest and Quest 2 really well. The sound is increased incredibly well .
Steve how did it compare to the elite strap? Would like to see an add on that incorporates the elite strap as well for those who have already purchased it.
If more comfortable the strap would be awesome but if you get the elite strap so there is comfortably then switch to elite charging strap when it is dyeing I plan on testing this
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@@leongregorio well I put the files in the software out of curiosity and it would be expensive. It's like 10€ in material plus 20€ for the printing time, and that doesn't include any post process like sanding or painting (which is not really necessary tbh). I still have to actually print and see how it really is.
@@paudiaz4660 I am printing one at this moment. Had to split it in two (Ender 3Pro) because it was a bit to big for my buildplate. Materialcost .. about 2 dollar. Time .. 23 hours (but, it's not like you have to hold the printer when it is printing .. just go to bed, and when you wake up it's ready)
@@Motorboot-Hoedan I actually have the same printer and was able to print it in one piece, I did however have to adjust where it sat quite a few times before it was actually centered properly to be able to print. After I did however, it came out great
FINALLY! *SLAPS TABLE AGRESSIVELY* THANK YOU! I have been waiting for somebody to design something like this so I don't have to spend a stupid amount on the elite strap.
The print failed because it was a hair to large for my Ender 3Pro. But, I splitted the maze in 2, and printed it in 2 pieces. Left half is ready, right half is printing now. Should be ready in 5 hours ! If somebody knows a place where I can put pictures of it, let me know.
Regarding cabling, there's an Anker cable mentioned on the Oculus Link support page that's USBC to USB3 A. I saw a review mentioning it from Mike on VR Oasis (there's also an extender if you want to use it for Link, can get a 26ft total length combining them for cheaper than the official Link cable, which is USBC direct) and it does charge the headset, albeit slower than the official cable according to the review. I picked the cable and extender via Amazon and can get roughly 3 hrs play via Oculus Link with my Quest 2 using them. They have 3ft, 6ft, and 10ft options. You should be able to find it on Amazon by searching for Anker Powerline Oculus for the main cable and CableCreation Active USB extension for the extender if you wanted to have the extra length for Oculus Link use.
The quest 2 is such a hit that getting a company to make these using injection molding might actually be viable. Maybe even insert some koss porta pro nubs on the inside of the discs
@SteveKnows I bought a 2pack Miady 10000mAh batteries on Amazon and they charge my Quest 2. The power cord they come with also has a magnetic usb-c plug, so it makes for a very handy device. Also make sure you're using the correct plug out as some come with 2 USB plugs but one is a lower output. I would also purchase a 3D printed headstrap if it were reasonably priced (maybe they can find an ebayer who will print it for them) - much thanks
SteveKnows, thanks for being the 1st VR content provider on TH-cam to finally address the HUGE frustrating power bank issue. There doesn’t seem to currently be any power bank/usb-c to usb-c or usb-c to usb-a cables combinations that work to allow charging while you play on the Quest 2. No one on Reddit or elsewhere online has a solution yet. Hopefully this is something Oculus/ Facebook fixes in an update very soon. Being limited to only 2.5 hours at a time in VR is extremely disappointing after being used to staying in VR for well over 6 hours using the same 20000 power bank you show here in your video.
Honestly the hardest part about selling is printing and putting together the headstraps in a timely manner. I printed 3 off so far for my friends and I and not only was it costly but it took 2 days to get them ready since we have other things to do as well. We're tweaking the design to make it fit nicer and print faster, but I'd hate to sell the original makers product without his permission. If people are interested comment and I'll make a list to see about using my friend's printer farm to make these instead of the VR gun adapters! :) P.s- I have contacted the original designer and he has given me permission to do this!
@@csporto2332 well currently we print and sell those other adapters locally, but are looking to expand. Once I have enough responses I can look into starting up, and on top of that I have permission from the Original designer!
the files are gone but after researching i found a reddit post by someone who had split the files to print on smaller printers this also includes the original files too drive.google.com/drive/folders/148pTwyLZrzAQnBExGxqTjYCEbqyMCleU www.reddit.com/r/OculusQuest/comments/ji28eg/boneworks_oculus_quest_2_strap_split_in_3_parts/
and yes i did like my own comment to try and help boost it to get to the top so other users will see this and not have to search the internet like i did
you will need 3d builder (free on microsoft store)to split the side files for printers with a smaller bed size like the ender 3 as the side files seem to be put together rather than split into left and right, this is easy to do and takes less than 5 minutes to split into two separate files (the back panel is fine) the rest of the files such as the antenna and battery pack are in the original files folder
I noticed when i have my headset on, it stops charging with my battery pack, but when i put it up and it pauses, then it begins to charge. Which is total bullshit, btw. I feel like this is a "feature" to incentivize people to buy the official battery pack/elite strap, that needs to be sideloaded away.
I haven't had a problem with the Oculus Quest 2 charging from my power banks. I use Anker power banks and wires that are double threaded . My power banks are the 20100 and the 26800. They work awesome and have always kept my headsets charged without either of them running down while playing. Even when I only have 4% battery life on either headset. Thanks for your great work work Steve, keep it up and happy gaming.
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
i dont have a 3d printer and a quest 2, nor the interest to buy one if ill ever have a quest 2, because im cheap, but it looks really good and cool so i hope it goes on market :D
Such a cool mod, well thought out. It's crazy how imaginative the VR/Quest community is. I love the cyberpunk aesthetic. Definitely looks better on the OG Quest
I tried the link and it takes you to a 404 page. Does anyone know what ever happened to this? Is there still an stl for it (or something similar) around? I tried a few sites (thingverse, yeggi, cults) and none of them had anything like this. If he took it down to start selling them, where can I get one?
@@Hacker-cw9lc sorry for the late reply, I seem to have missed the notification. If you are willing to share the link that would be very much appreciated!
Just to vouch for the ear muffs incase people think they are meaningless, take your rift s, quest 1, quest 2 and while listening to music put your hands over the speaker and cup it. That improvement is just from your hands, muffs like this will improve audio lots.
DAMN! This thing is so soo much better then I expected WOW! Im really sad dmthi because: 1. I don't have a 3d printet 2. I live in Denmark so it would probably be very very VERY expensive for me to buy. So yeah if you could reach out for them to start doing it again please do it
If you don't have a 3d printer at home, look for a nearby fab lab, it's basically a workshop that has 3d printers, lazers etc. They can vary in prices (the one I've been to is about 10 bucks for a 1 hour print) You'll be shocked at how many their are. I found one in my town and I live in a lost place in the middle of nowhere.
I've been seeing posts of the Elite Headstrap breaking and this was the first thing I saw as an alternative.. TAKE MY MONEY! I'LL BUY 2 JUST TO SUPPORT THE DUDE THAT MADE IT. There is plenty of opportunity for him here.
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
I'm using a power bank in my back pocket on the Oculus Quest 2, and I've noticed that it won't charge, but it will discharge exponentially slower. Where without, 1% is 1%, with the battery its more like 5% is 1%. So, just a bigger battery and place to power from, but not charge off of. It will charge when not playing off of the bank, however. But during play, it just 'expands' the size of your current battery, in a way.
How much are you willing to pay- with postage it would probably be same price as elite strap- do you still want it then? The creator would not make much money as they would have to buy a 3D printer farm or print only about 5 a week. 3D printing is poor on price for large quantites vs mass production- its only really good for prototyping where the price is less important than getting a test piece or for premium price items that individuals really want. Take a look at Shapeways prices.
If you don't have a 3d printer at home, look for a nearby fab lab, it's basically a workshop that has 3d printers, lazers etc. They can vary in prices (the one I've been to is about 10 bucks for a 1 hour print) You'll be shocked at how many their are. I found one in my town and I live in a lost place in the middle of nowhere.
I do have a 3D printer but it's down and my brother is taking his sweet time fixing it, but this looks like a great addon for the Quest. Makes it look even more cyberpunky.
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
I own a fairly well dialed in Ender 3 and this barely (but does) fits in the build area if oriented vertically. The problem is, the head strap body alone would take more than two days to print. I just loaded this into Prusaslicer to verify.
I have an off brand 20000 MaH backup battery with PD and I used a random USB C to USB C cable. It charged my headset while I played. It may be that the A to C transition isn't working, or that the battery bank needs to support Power Delivery. Either way, it works for me.
So you would definitely buy this without any idea how much it costs? Guess that is true of the mentality of people with no idea where the caps lock key is.
@@Cloudman572 ... i don't need your opinion thanks also i of course would consider the price but i don't think someone who judge people on youtube based on if they use capslock would understand.
If anyone wants to purchase one, I will print a select few for sale. But, it costs an entire 20 dollar spindle of filament and then you have to pay for the effort and the shipping, so I am not certain it would be feasible for anyone on a budget.
just fond someone on etsy who will 3d print stuff for me! Can't wait to 3d print this and use it, this will be a life changer (and yes, i do still have the files). If I get this 3d printed, and use it with the Quest 2 Grey Silicone VR Cover, I'll probably end up paying like $60-$70 and get the absolute best outta my headset. Thanks Steve!!
another thing I wish to have are some hand straps for the oculus quest 2 controllers, like those used for the quest 1, but better fitted for the quest 2
It seems any cable will charge it but it doesn't stabilize percentage till 77 percent for some reason. Me and a friend have different cables and battery packs that can output 3.1 amp
Has anyone printed this yet? I just finished and it does not fit my Quest 2. I never noticed before, but the head strap mount on the Quest 1 is perpendicular to the Quest body and on the Quest 2 they are slightly slanted in. Since this is designed for the Quest 1, the slots that you slide the mounts into are also straight. If you watch Steve's video above and freeze it right at the 3:16 mark, you can see it. If you do print this, you might want to scale it down a tiny bit so it will wedge in place. I'm trying to see if I can design some sort of adapter.
i would LOVE this headstrap, ive been looking for one for my occulus 2 but i dont have a 3d printer to make it, and it would be AMAZING to have one of these
I game with a powerbank USB C to USB C (15W as max output), using the included USB C cable with the headset. Works perfect (charging more then what the headset consumes) :)
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
He should do preorders. That way he doesn't have extra stock issues and can print to order. But should do it soon. Being one of the first 3rd party accessories will have more business now than if he waits for a year
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
Just downloaded the .stl file. I'll print this sucker as soon as I can get around to it. Hopefully, I wouldn't have to make any modifications for it to fit my oversized cranium.
For people that don't have a 3d printer, check your public library or art gallery... some of them have Makerspaces now and will have one or more printers you can use for a minimal fee.
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
Looks Beautiful On The Quest v1. A Hard Shell Cover For The Front Of The Quest v2 Would Look Fresh (That Clear Or Smoked Honey Combed Quest V1 Faceplate)... If It's Not Too Much To Ask Is They're Any Chance We Might See Some Custom Matching Themed Wraps For The Controllers?
I would like this and do not own a 3D printer. Trust me the demand will be there
Yup
SAME AF SOMEONE PLEASE PRINT AND SELL THIS TO ME
There are companies that will print stuff for you on etsy
@@ryanmalin A lot of local libraries have 3D printers as well (In the US). Not sure how prevalent this is across the entire country.
Same
The demand is def there, the creator could make some serious bank if they price it right (selling it with fitted pads and added electronics that is)
@Magica Fox probably, worlds better than the premium strap at the same price. Makes sense
@Sir Soma I’m sure it’s fine, it’s just 2-3 times overpriced. It’s the printer and toner business model in action.
@Magica Fox they’d make a loss wheb selling it for any lower than 70 bucks
@Sir Soma it's honestly pretty good! I actually think it's more comfortable than my deluxe audio strap
I've just taken a look at the files and it simply wouldn't be worth trying to produce this for sale - the problem is the print time it would take about 24 hours to produce one and mean you have to sell it for more than you could buy an elite headset for.
ive never personally wanted the need for a head strap, but I would 100% buy this if it came into stock
Same.
I need this
Need it
@Ken Mettier he stopped it cuz there wasn’t enough supporters im pretty sure :(
That has a very "retro" look to it. Feels like an 80's product. And I LOVE it.
yeah, ive noticed that some of boneworks has that vibe to it
Yeah... I need this, kinda sucks that I don’t have access to a 3d printer
everyone has access to a printer, there are online print services.
@Ball Cat you clearly didn't understand me. there are online printing services that will print the parts for you. So, yes 3D printers are $200+ and be expensive to own one. It doesn't mean you have to own one to have it printed.
Well thanks I didn’t know that was a thing.
@@PoofsBloon you have to own money
Big tip in my country almost all libararys have 3d printers now a days that you can use fairly cheap also there are a few online services etchy is a good place to find them.
Dude I don’t have a 3d printer and I would LOVE one of these
lucky I have one ;)
@@office_desk yooo can I buy one off you?
@@daveyonthedaily9525 Meh, I have two spools of the plastic so Im assuming thats going to make like idk two only or something but you also need like a cushion and it would take time but yeah sure maybe if I can and If I figure out to then sure.
no scratch that, idk how much it'll make
@@office_desk one spool of 1 kg would be enough for about 2 straps and it takes between 30 and 40 hours to print depending on your printer and print settings using custom supports makes it even better. (this is all acording to my slicer cura with the recomended settings on thingiverse didn't print it myself yet.)
Don't have a 3d printer and this looks like an amazing add on!
I have one...
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@@Mistiguss I’m interested. Don’t scam me
@@Mistiguss Hey! Did you ever make one of these for yourself? I'm here like a year late and the file has since been taken down so I'm wondering if you'd happen to have it
Please convince them to sell this! I don’t have a 3D printer but I’d love this
Just download the stl files and then go to a website or shop that will print the files for you. Not that difficult
@SkullyTheCreator yes easiest place is etsy and then search for 3d printing, but there are other places around the web.
I just finished printing this Headset, it took 2 1/2 days. It is pretty cool and fits the Quest and Quest 2 really well. The sound is increased incredibly well .
Hey! Do you mind sharing the stl files to me?
@@isabellecruz7021 You can download it from Thingaverse...
Please share the file!
Steve how did it compare to the elite strap? Would like to see an add on that incorporates the elite strap as well for those who have already purchased it.
it is only held on with velcro and is not as comfortable.
@@PoofsBloon I have both way better
@@oreomodz5197 I guess it depends on the head shape for comfort. For me the print digs into my neck sometimes.
My power brick didn't seem to work on the usbc output but the usb3 port was fine. Romoss 18w 30000. Catch is its over half a kilo of power
If more comfortable the strap would be awesome but if you get the elite strap so there is comfortably then switch to elite charging strap when it is dyeing I plan on testing this
I need one!!! The fact they’re offering the print files for free makes me want to buy it from them! Let’s bless this genius
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
yes i need one too
Even the antenna isn't just for show, it's for cleaning the lenses. Ugh this thing is so awesome.
I have a small 3d printing business so I'll definitelly print one of these for my quest 2.
How much will you charge one fr? I’m interested
@@leongregorio well I put the files in the software out of curiosity and it would be expensive. It's like 10€ in material plus 20€ for the printing time, and that doesn't include any post process like sanding or painting (which is not really necessary tbh).
I still have to actually print and see how it really is.
@@paudiaz4660 I am printing one at this moment. Had to split it in two (Ender 3Pro) because it was a bit to big for my buildplate.
Materialcost .. about 2 dollar.
Time .. 23 hours (but, it's not like you have to hold the printer when it is printing .. just go to bed, and when you wake up it's ready)
@@Motorboot-Hoedan I actually have the same printer and was able to print it in one piece, I did however have to adjust where it sat quite a few times before it was actually centered properly to be able to print. After I did however, it came out great
@@Motorboot-Hoedan 2 dollars? How many grams of material do you use? Also, It's 13 hours for me, are using the settings that the creator suggests?
FINALLY!
*SLAPS TABLE AGRESSIVELY*
THANK YOU!
I have been waiting for somebody to design something like this so I don't have to spend a stupid amount on the elite strap.
Gonna print this now. About 20 hours of printing time for the headstrap itself.
Can't wait to see it all finished tomorrow ;)
Just got here. Have u finished printing it yet?
It failed didn't it?
The print failed because it was a hair to large for my Ender 3Pro. But, I splitted the maze in 2, and printed it in 2 pieces.
Left half is ready, right half is printing now.
Should be ready in 5 hours !
If somebody knows a place where I can put pictures of it, let me know.
@@Motorboot-Hoedan yeah put a picture on r/OculusQuest, on Reddit. Then reply to this with the link.
@@Motorboot-Hoedan Ender 3 gr8 machine. Imgur and post the link
Regarding cabling, there's an Anker cable mentioned on the Oculus Link support page that's USBC to USB3 A. I saw a review mentioning it from Mike on VR Oasis (there's also an extender if you want to use it for Link, can get a 26ft total length combining them for cheaper than the official Link cable, which is USBC direct) and it does charge the headset, albeit slower than the official cable according to the review. I picked the cable and extender via Amazon and can get roughly 3 hrs play via Oculus Link with my Quest 2 using them. They have 3ft, 6ft, and 10ft options. You should be able to find it on Amazon by searching for Anker Powerline Oculus for the main cable and CableCreation Active USB extension for the extender if you wanted to have the extra length for Oculus Link use.
The quest 2 is such a hit that getting a company to make these using injection molding might actually be viable. Maybe even insert some koss porta pro nubs on the inside of the discs
Ear muffs! Last night I was watching the Cirque du Soleil and I cupped my hands around my ears and the sound was so much better!
Man I would love this for my new quest 2 I would for sure buy it if it was available. It has great aesthetic and practicality!
You would surely buy it without knowing the price?
@@Cloudman572 Cmon man if it was something ridiculous like 20 thousand dollars of course I wouldn't buy it but if was reasonably priced, sure.
@SteveKnows I bought a 2pack Miady 10000mAh batteries on Amazon and they charge my Quest 2. The power cord they come with also has a magnetic usb-c plug, so it makes for a very handy device. Also make sure you're using the correct plug out as some come with 2 USB plugs but one is a lower output. I would also purchase a 3D printed headstrap if it were reasonably priced (maybe they can find an ebayer who will print it for them) - much thanks
I defintly would want one of those but i don’t have a 3D printer
Edit: didn’t expect that many likes (50 at the time)
Same
Same
Same here
same
Same
Wow this thing is cool!!!
It's always nice to see my name in the patreon section!
Good video, Steve!
@@SteveKnows your content is getting better in each video, totally worth it 👍
Add one more to the “I want this to be in production”
SteveKnows, thanks for being the 1st VR content provider on TH-cam to finally address the HUGE frustrating power bank issue. There doesn’t seem to currently be any power bank/usb-c to usb-c or usb-c to usb-a cables combinations that work to allow charging while you play on the Quest 2. No one on Reddit or elsewhere online has a solution yet. Hopefully this is something Oculus/ Facebook fixes in an update very soon. Being limited to only 2.5 hours at a time in VR is extremely disappointing after being used to staying in VR for well over 6 hours using the same 20000 power bank you show here in your video.
Darn, I got my quest 2 not too long ago and see this but I don't have a 3d printer. It just looks futuristic, I need to get this this somehow.
Honestly the hardest part about selling is printing and putting together the headstraps in a timely manner. I printed 3 off so far for my friends and I and not only was it costly but it took 2 days to get them ready since we have other things to do as well. We're tweaking the design to make it fit nicer and print faster, but I'd hate to sell the original makers product without his permission. If people are interested comment and I'll make a list to see about using my friend's printer farm to make these instead of the VR gun adapters! :)
P.s- I have contacted the original designer and he has given me permission to do this!
plz. You could do this and headset adapters for like halo straps. Id buy the hell out of this.
@@csporto2332 well currently we print and sell those other adapters locally, but are looking to expand. Once I have enough responses I can look into starting up, and on top of that I have permission from the Original designer!
the files are gone but after researching i found a reddit post by someone who had split the files to print on smaller printers this also includes the original files too
drive.google.com/drive/folders/148pTwyLZrzAQnBExGxqTjYCEbqyMCleU
www.reddit.com/r/OculusQuest/comments/ji28eg/boneworks_oculus_quest_2_strap_split_in_3_parts/
and yes i did like my own comment to try and help boost it to get to the top so other users will see this and not have to search the internet like i did
if you see this comment give it a thumbs up to help other users who check the comments see it without having to filter to new
you will need 3d builder (free on microsoft store)to split the side files for printers with a smaller bed size like the ender 3 as the side files seem to be put together rather than split into left and right, this is easy to do and takes less than 5 minutes to split into two separate files (the back panel is fine)
the rest of the files such as the antenna and battery pack are in the original files folder
Thanks you sir are a legend mine broke and i deleted the files now i can reprint it
@@The_oli4 👆👉
I bought a 3d printer because of this. It is printing as we speak. 24 hours... 20 dollar spindle of filament, and entirely worth it to me.
I noticed when i have my headset on, it stops charging with my battery pack, but when i put it up and it pauses, then it begins to charge. Which is total bullshit, btw.
I feel like this is a "feature" to incentivize people to buy the official battery pack/elite strap, that needs to be sideloaded away.
I bought a brand new power bank and the quest 2 rarely recognises it. Idk why
@@bazookasniper5167 same. The one with usbc and 3.0. I also tried my old one And if doesn't work.
@Jenn Ro What power bank do you have success with? I'm just about to order one for my Quest2.
@Jenn Ro Thank you
Have you made sure the battery pack pushes enough power to keep it charging under higher load?
I haven't had a problem with the Oculus Quest 2 charging from my power banks. I use Anker power banks and wires that are double threaded . My power banks are the 20100 and the 26800. They work awesome and have always kept my headsets charged without either of them running down while playing. Even when I only have 4% battery life on either headset. Thanks for your great work work Steve, keep it up and happy gaming.
I would love one I hope that he decides to sell them again but could I get one for the original quest
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
Set the store up man right now! No joke Steve the hype is even more real now!!
"I would like this and do not own a 3D printer. Trust me the demand will be there" *Echo-5555
* I agree with this man!!!!!!!!!!!
I love how it brings a kind of retro vibe to the Quest
i dont have a 3d printer and a quest 2, nor the interest to buy one if ill ever have a quest 2, because im cheap, but it looks really good and cool so i hope it goes on market :D
Such a cool mod, well thought out. It's crazy how imaginative the VR/Quest community is. I love the cyberpunk aesthetic. Definitely looks better on the OG Quest
I tried the link and it takes you to a 404 page. Does anyone know what ever happened to this? Is there still an stl for it (or something similar) around? I tried a few sites (thingverse, yeggi, cults) and none of them had anything like this. If he took it down to start selling them, where can I get one?
i have a link
a reupload, if you still want it lmk
@@Hacker-cw9lc Hi! thanks for proposing! can you provide me the link, please?
@@Hacker-cw9lc Send pls
I would also like a link, this looks perfect 🙂
@@Hacker-cw9lc sorry for the late reply, I seem to have missed the notification. If you are willing to share the link that would be very much appreciated!
Just to vouch for the ear muffs incase people think they are meaningless, take your rift s, quest 1, quest 2 and while listening to music put your hands over the speaker and cup it. That improvement is just from your hands, muffs like this will improve audio lots.
DAMN!
This thing is so soo much better then I expected WOW!
Im really sad dmthi because:
1. I don't have a 3d printet
2. I live in Denmark so it would probably be very very VERY expensive for me to buy.
So yeah if you could reach out for them to start doing it again please do it
Hey dude I’ve got a printer. If you are interested in buying one I’d be willing to sell you the 3D printed shell.
If you don't have a 3d printer at home, look for a nearby fab lab, it's basically a workshop that has 3d printers, lazers etc. They can vary in prices (the one I've been to is about 10 bucks for a 1 hour print) You'll be shocked at how many their are. I found one in my town and I live in a lost place in the middle of nowhere.
I've been seeing posts of the Elite Headstrap breaking and this was the first thing I saw as an alternative.. TAKE MY MONEY! I'LL BUY 2 JUST TO SUPPORT THE DUDE THAT MADE IT. There is plenty of opportunity for him here.
"but you cant really see what you are doing"
Passthrough.
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
The person that’s going to 3D print these and sell them, HIT ME UP!!
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@@Mistiguss I want one, let me know
@@Mistiguss I would be interested
Don't have a 3d Printer but I both would like a strap enhancement as well as more bulky technology.
I want one but don’t have a 3D printer
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
All the support that people are giving Facebook and the lack of competition preventing the company checking themselves ethically is actually scary
If you don't own a 3D printer, send the files to a 3D printing company to do it for you, then they will ship it to you
How?
@@WxckyPenguin when the company gets the files they just print it out on their printing beds, then they will pack it and ship it to you
"Do you guys not have 3D printers?" :D
It looks pretty cool, kinda like a Swiss Army Headstrap.
I need one! Make them for sale!
So you would definitely buy this without any idea how much it costs?
@@Cloudman572 100%
@@dastandardgaming2948 Twat.
@@Cloudman572 lol
I'm using a power bank in my back pocket on the Oculus Quest 2, and I've noticed that it won't charge, but it will discharge exponentially slower. Where without, 1% is 1%, with the battery its more like 5% is 1%. So, just a bigger battery and place to power from, but not charge off of.
It will charge when not playing off of the bank, however. But during play, it just 'expands' the size of your current battery, in a way.
BRUH WHY WOULD U STOP MAKING IT
THE AVERAGE PERSON DOES NOT HAVE A 3D PRINTER
ON TOP OF THAT THE CREATOR WOULD BE RICH ASF
How much are you willing to pay- with postage it would probably be same price as elite strap- do you still want it then?
The creator would not make much money as they would have to buy a 3D printer farm or print only about 5 a week. 3D printing is poor on price for large quantites vs mass production- its only really good for prototyping where the price is less important than getting a test piece or for premium price items that individuals really want.
Take a look at Shapeways prices.
If you don't have a 3d printer at home, look for a nearby fab lab, it's basically a workshop that has 3d printers, lazers etc. They can vary in prices (the one I've been to is about 10 bucks for a 1 hour print) You'll be shocked at how many their are. I found one in my town and I live in a lost place in the middle of nowhere.
First lets go!!!!
nobody cares
shush
Ayyyyyyy lets go i found the first useless comment of the day
@@kvxpe0 Nobody Asked
@@Eman0807 thats right, nobody asked about that u are first
Definitely would want to buy. And a battery compartment would be cool because I can change my batteries blindfold now since having the quest.
I do have a 3D printer but it's down and my brother is taking his sweet time fixing it, but this looks like a great addon for the Quest. Makes it look even more cyberpunky.
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
I would absolutely purchase several of these! It honestly looks sooo much better than anything I've looked at before. Function + form for the win!
I own a fairly well dialed in Ender 3 and this barely (but does) fits in the build area if oriented vertically. The problem is, the head strap body alone would take more than two days to print. I just loaded this into Prusaslicer to verify.
I would really love to have this, but I don’t have a 3D printer. THE DEMAND IS HERE.
I have an off brand 20000 MaH backup battery with PD and I used a random USB C to USB C cable. It charged my headset while I played. It may be that the A to C transition isn't working, or that the battery bank needs to support Power Delivery. Either way, it works for me.
I DEFINATLY WOULD BUY THIS. I think the demand will be there
So you would definitely buy this without any idea how much it costs? Guess that is true of the mentality of people with no idea where the caps lock key is.
@@Cloudman572 ... i don't need your opinion thanks also i of course would consider the price but i don't think someone who judge people on youtube based on if they use capslock would understand.
@@lucasvanmessem9486 Twat
If anyone wants to purchase one, I will print a select few for sale. But, it costs an entire 20 dollar spindle of filament and then you have to pay for the effort and the shipping, so I am not certain it would be feasible for anyone on a budget.
How many are you making? Would $60+ shipping work?
just fond someone on etsy who will 3d print stuff for me! Can't wait to 3d print this and use it, this will be a life changer (and yes, i do still have the files). If I get this 3d printed, and use it with the Quest 2 Grey Silicone VR Cover, I'll probably end up paying like $60-$70 and get the absolute best outta my headset. Thanks Steve!!
Man, if they decide to start selling this, I will get one, especially if it is close to, or cheaper than the elite headstrap
Would love if they could offer it in white, with comfort foam/padding as a package deal
I don’t have a 3D printer and would like one too. I really hope they would start making these Quests caps
another thing I wish to have are some hand straps for the oculus quest 2 controllers, like those used for the quest 1, but better fitted for the quest 2
It would be lovely if they kicked up busniss again bc its so much work for getting a rd printer then make all the stuff
It seems any cable will charge it but it doesn't stabilize percentage till 77 percent for some reason. Me and a friend have different cables and battery packs that can output 3.1 amp
i think everyone would like one, the demand is definitely there
Has anyone printed this yet? I just finished and it does not fit my Quest 2. I never noticed before, but the head strap mount on the Quest 1 is perpendicular to the Quest body and on the Quest 2 they are slightly slanted in. Since this is designed for the Quest 1, the slots that you slide the mounts into are also straight. If you watch Steve's video above and freeze it right at the 3:16 mark, you can see it. If you do print this, you might want to scale it down a tiny bit so it will wedge in place. I'm trying to see if I can design some sort of adapter.
I hope he puts a store up cuz I really want it I'll definitely purchase it for the right price
Definitely need this, I think the demand is definitely here
how well does it work with the quest 2 with glass's users?
It looks better then the elite strap in my opinion. Definitely going to find a friend with a 3D printer
Pretty cool. I like the sound enhancers.
I'm interested but don't have a 3d printer
i would LOVE this headstrap, ive been looking for one for my occulus 2 but i dont have a 3d printer to make it, and it would be AMAZING to have one of these
If adjustments are made for quest 2 I will buy one
I game with a powerbank USB C to USB C (15W as max output), using the included USB C cable with the headset. Works perfect (charging more then what the headset consumes) :)
I don’t have a 3D printer and would really like that. Cause that just looks insane
Have been looking for a headstrap that isn't the elite strap and this looks like the perfect replacement
Great video! Would love to see more 3D printed items for the Quest 1& 2
That head strap is AWESOME!
Yes please!!! I am definitely interested in purchasing this for my Quest 2!!
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
He should do preorders. That way he doesn't have extra stock issues and can print to order. But should do it soon. Being one of the first 3rd party accessories will have more business now than if he waits for a year
Steve, Videos Of 3D Printed Accessories Such as this Strap are Always Great. Thank You for Informing us
The demand is definitely there, I would absolutely get one
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
This is so righteous!!!! Big motivation for me to finish building my 3D printer
I would 100% buy this for my quest 1
I was looking everywhere for something that can replace or do better then the elite strap for the Quest 2. I want one!
Looks pretty neat, should make them again
My solution woth the battery pack was using the official cable that came with the headset since the one i bought can use usb c
Just downloaded the .stl file. I'll print this sucker as soon as I can get around to it. Hopefully, I wouldn't have to make any modifications for it to fit my oversized cranium.
For people that don't have a 3d printer, check your public library or art gallery... some of them have Makerspaces now and will have one or more printers you can use for a minimal fee.
So glad this works with the quest1 too and the strap to hold a battery bank is just what I need, but I don't have a 3d printer...hmmmm?🤔
Yes I would definitely want one for my quest 2! This is awesome!!
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
If headphones get added to this and it went for around $50-$80 (considering the electronics and amout of material used) I would definitely buy this
If my 3d printer can't print this then I'm buying one, I need this in my life
Now that i know it works for the Quest 1 I would deffo buy one
Looks Beautiful On The Quest v1. A Hard Shell Cover For The Front Of The Quest v2 Would Look Fresh (That Clear Or Smoked Honey Combed Quest V1 Faceplate)... If It's Not Too Much To Ask Is They're Any Chance We Might See Some Custom Matching Themed Wraps For The Controllers?