How to Permanently Calibrate Any Hall Effect for PS5 DualSense Controller using Free Software Online
ฝัง
- เผยแพร่เมื่อ 24 พ.ค. 2024
- Subscribe to the channel for more related videos @ordinarye784
Twitch Channel: / mrhurricane0
Comment here and/or on my instagram: / ordinarye_
Target: 1000 Subs activates next PC Build Giveaway.
Welcome back! Hope you are enjoying the videos and please subscribe and leave any positive/constructive comments.
In this video I test and show you how to permanently calibrate your Hall Effects Magnetic Analog Sticks using Free Software Online for the PS5 DualSense Controller plus giveaway announced.
Hope you enjoy the video and please subscribe and leave any positive/ constructive comments.
Please note that we will never ask you for any money ever so don't be fooled by scammers!
All we ask is that you subscribe to the channel which does not cost you anything.
Thank you
Calbration Software: dualshock-tools.github.io/
Game Pad Tester: venatus--html5gamepad.netlify...
Amazon Affililiate Links to items used in Video:
Desolding Pump 230V: amzn.to/3NKjCHa
Low Melt Solder: amzn.to/48ekITT
Heat Resistant Silcone Mat: amzn.to/48m664Y
Soldering Iron: amzn.to/47gbEws
High Heat Solder: amzn.to/4aEahKD
Blue Hall Effects: amzn.to/47Kez0A
Soldering Desoldering Station: amzn.to/3UKRxnB
Faceplate Shell: amzn.to/3w43yKi
Hot Air Rework Station: amzn.to/3SIrR9A
Red Tag Hall Effects: amzn.to/3w4RE2U
Duel Sense Edge Controller: amzn.to/49kSAOW
Duel Sense Edge Controller Module: amzn.to/3HL8JRY - วิทยาศาสตร์และเทคโนโลยี
Just found your channel a couple weeks ago. I appreciate you putting multiple brands head to head. I recently picked up some k silvers and i can finally calibrate them now.
Hi thanks. Just found out that in order to keep the central calibration permanent you need to unlock the board using the unlock button on the site below. I need to update my video now urgh. Appreciate your support thanks
@@ordinarye784 The unlock at the bottom isn't needed. in the Center Calibration section you just need to check the box near the red text to make the change permanent.
I don’t get a check box near the red writing?
@@ordinarye784 7:40 i believe he means here it says write changes permanently above the red text.
Yea but they are saying there should be a check box but I don’t see it on mine?
I have tried it, at least it makes my controller circular but the best max error 5-7% after testing it for several times. But still good before 14-17% error
This night i'm gonna change my stock sitcks for hall effects. This is going to be useful
Goodluck
@@ordinarye784I have a question! If i use this process to calibrate my sticks can i skip calibration by the small holes in the potentiometer?
Yes I believe so. I had already didnt it with small holes but the other Hall effects on the other controllers did not have the small holes and it worked for them
@@ordinarye784 thank you for answering!
No worrries, do you have drift?
Just be aware that for the center calibration it defaults to temporary (which is fine for testing) but you will need to put a check in permanent mode if you want the changes to stay when powered off or connected to the PS5.
Hi thanks for this info but where is the check box it doesn’t show up for me?
It must of saved permanently they way I did it because the green ones work perfect?
@@ordinarye784 when you select the center calibration (near the red colored text) by default it is unchecked.
The locked and unlocked boxes ?
@@ordinarye784 yes, only the center calibration section has 1
Hey, there are a few versions of the hall effect sticks. Im looking into a company that uses gen 3 with a driver board for the ps5 Dualsense. What are the differences, any thoughts?
Hi, thank you. So far none I have tested are perfect but they are ok. Using the GUI software on the green sticks gave me less range. And the others lose range too but some don’t which is weird but I think it was the blue one. I’ve not used any boards so far and I am waiting for V5 to arrive which apparently are better so let’s see. I’ll be doing an update video and review of all when they arrive.
These guys are using V5 boards with gen 3 sticks but there is almost no info on these things about. It’s very frustrating trying to read up on it or find some real information. It would be easier if there was a company that would specialise on these things and have consistency in quality and range for all controllers.
Yea it sucks but I have high hopes for the Version 5’s
So do I, I’ll watch your video for sure if and when you review and test it
My dualsense board is BDM-030 and I use the orange sticks with the red chip, the center calibration is working fine but the roundness calibration doesn't work at all 😢
I think the firmware on newer boards may be incompatible with the tool. I hope they find a workaround soon.
It should work my boards are the same yours. However I would do the roundness just do the centre calib
I’m scared to try this on my dualsense edge wonder if since it’s permanent if it’ll affect new modules when I have to eventually replace them.
Yea it’s permanent to the board so you will have recalibrate again if you put new ones in After
I wonder if Sony can block this with a firmware update at some point?
I’m also wondering what happens when they update the controllers ? So waiting to find that out too.
I have a question
If I choose the permanent option and wanted a better result , Can I retry again ?
Hi, That is what I have been doing so I assume so? Also remember to check the box where it says to make it permanent
@@ordinarye784 Thanks man , Your videos are really informative 🙏