Nice run video i like what I see bro last night i saw some one with this motor on display when I see the piston i know i would like the engine.now i know it real good.. thanks for the ride 💯👍🙏
I can't get mine to run right. It runs like poop unfortunately. All I did was open up the intake manifold a little before installation. Can't get squat past 1/4 throttle and tops out around 20ish mph.
Run the motor on idle and spray brake cleaner on the gasket areas if the motor reacts you have an air leak if not it could be a jetting issue or your squish isn’t tight enough
how do you adapt a pwk carb to it? do yoy have a link to the intake, im wondering because i have one lying around and i would like to swap it, i just cant seem to find the 21mm intake adapter.
I probably need to check mine thanks because it runs great but having trouble with it idling. Haven’t started it for a couple weeks now haven’t had time.
Dont remove/port your bearing shields. I did and now it wont run right with ALL new gaskets and seals. I'm gonna try Smolik's viton seals with my ported sheilds before tearing into it.@@mbrrideitlikeyoustoleit8436
Nice run video i like what I see bro last night i saw some one with this motor on display when I see the piston i know i would like the engine.now i know it real good.. thanks for the ride 💯👍🙏
Long time no see bro cool build thanks for sharing it bro
Thanks yea I kinda slowed down on riding it’s been kinda cold. I can’t wait for summer.
Very clean and mean!
Great run. Seemed real easy for your build to hit 50mph.
Sounds awesome brother ride safe
Whatch out for the pop up, sounds good tho 👽👍
I finally get to see one run what pipe are you running and is it in stock configuration nice ride brother ride safe✌👀👍
Yes stock just pwk21 carb upgrade stock
Can I ask I jets did u use?
Nice got some power to it
Real gps view ... awesome
That's pretty cool almost 50mph and that's stock badass
At 6:00 I hit 50
@@mbrrideitlikeyoustoleit8436 is it really all stock with a jrl/bofeng carb'?
Link to the Olyin cylinder head? I know smolik makes heads but i think they look a little too showy for my liking.
gomaxind.com/products/avenger-85-high-compression-cnc-head-for-motorized-bicycle-engine-kit?_pos=1&_psq=av&_ss=e&_v=1.0
I like the olyin head style way better imo.
WOT,WOT 🚴💨💨💨💨
WOW
Just to note: that cloud is not the engine exhaust behind jarrod's emoji 😂
🚴💥☁☁☁☁
Dont forget the stop signs!
Is that the bottom and part of the top of a yd 100?
Very nice!
Thanks
Nice run. Where are you at sea level? Im in central Texas, Can consecutively hit 50mph. My record 3 times ive hit 53mph on a good day.
Nice I’m in Arizona
I can't get mine to run right. It runs like poop unfortunately. All I did was open up the intake manifold a little before installation. Can't get squat past 1/4 throttle and tops out around 20ish mph.
Run the motor on idle and spray brake cleaner on the gasket areas if the motor reacts you have an air leak if not it could be a jetting issue or your squish isn’t tight enough
How are the crank seals will they need replaced out of the box or are they seated nice
They are seated nicely.
Mine had the slightest little shavings on then. Legit hair thin. But they looked to be seated properly.
Nice run bro
Thanks 👍
Is the avenger 85 an iron sleeve jug ?
No It is not a iron sleeve
@@mbrrideitlikeyoustoleit8436 thanks for info.
how do you adapt a pwk carb to it? do yoy have a link to the intake, im wondering because i have one lying around and i would like to swap it, i just cant seem to find the 21mm intake adapter.
Clean ride, how does it hit 50 mph?
It’s the new average 85cc stock except the pwk21 carb. 10t/36t on 26” wheels
It’s the new average 85cc stock except the pwk21 carb. 10t/36t on 26” wheels
sounds nice
Have you run into issues with the crank seals yet? Mine only lasted about 20 miles.
I probably need to check mine thanks because it runs great but having trouble with it idling. Haven’t started it for a couple weeks now haven’t had time.
Dont remove/port your bearing shields. I did and now it wont run right with ALL new gaskets and seals. I'm gonna try Smolik's viton seals with my ported sheilds before tearing into it.@@mbrrideitlikeyoustoleit8436
Drive it like you stole it!!
I do have 50-72 main jets for the nt speed carb though.
Nice rip!!! 🎉🎉🎉
Thanks
What rear sprocket you running and do you have a pipe on it
10t/36t stock pipe
Mines on the way
Nice
Como faço para comprar um moto desse? Brazil
planning on combining an avenger and a shifter kit, hopefully it should go even faster then that. is that a stock motor?
Yes stock engine all I did was upgrade the intake and put a PWK 21 mm carburetor. The engine is stock stock pipe Stockport timing.
That’s gonna be awesome with the shift kit. Are you gonna post it on your channel? That would be awesome Would love to see how it turns out.
@@mbrrideitlikeyoustoleit8436 i probably will post it, it will probably be a fairly budget build too. Gonna try and keep it under $700 cad
@@mbrrideitlikeyoustoleit8436 did you add a reed valve?
No reed valve I’m using the intake off Amazon for the 212cc. SJVLXHI Black Intake pipe for 212cc GX200 VM24 pwk24 Mini Bike Go Kart a.co/d/8VUg2NR
Cost of cylinder, cylinder head, carburetor, crankshaft, piston and exhaust pipe
I'm running 20ish:1 with premo
I’m running 32:1 87 octane
That's what I'm doing to my phantom 85 trying to anyway I got the same performance Head
What's your brake setup
I’m using pit bike brakes. Best brakes I’ve ever used highly recommend them.
What’s the gearing?
10t/36t
phantom 85?
Avenger 85