FSX| TU-154 Engine Start Up Procedure (ENGLISH)

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ต.ค. 2024

ความคิดเห็น • 46

  • @PhlyDaily
    @PhlyDaily  11 ปีที่แล้ว +12

    Indeed this is the older version but shouldn't effect the start up. Make sure you turn the master on, i know that may sound stupid but every support website ask if the product is plug in first. Make sure you do everything in the exact order.

  • @firmanpandi9666
    @firmanpandi9666 4 ปีที่แล้ว +8

    2020 anybody? I come here after watch Phly watching his old videos and I relized, yeah, I need this tutorial for aviation geekness :)

    • @sabe7696
      @sabe7696 4 ปีที่แล้ว

      I came here to watch his first ever video

  • @PhlyDaily
    @PhlyDaily  11 ปีที่แล้ว +3

    So is this problem happening at the beginning of the start up correct? You start up your APU and get all 3 green lights and the nyc wont engage?

  • @wasimodoone
    @wasimodoone 8 ปีที่แล้ว +38

    tu 154 is still easier to handle than a woman

  • @idkstillme4100
    @idkstillme4100 3 ปีที่แล้ว +3

    Back in the days when Phly was actually a flight simmer.

  • @PhlyDaily
    @PhlyDaily  11 ปีที่แล้ว +4

    Awesome ya I love this plane such amazing dev.

  • @FSAUDIOGUY
    @FSAUDIOGUY 8 ปีที่แล้ว +5

    Thank you for posting! It starts up okay but when I shut down the APU the engines quit after about 20 seconds. No clue!

  • @andrzejfranciszekszymczak1940
    @andrzejfranciszekszymczak1940 8 ปีที่แล้ว +6

    Generators should be on, (3 switches with red lights above them) A/P, nav aids, should be turned on, gyros should be aligned also your method of turning off Apu (VSU) is not safe! It should be turned off with STOP (СТОП) button. You mustn't take off when red light in the left corner of captain's panel shows "Not ready" (НЕ ГОТОВ).

  • @jpatt1000
    @jpatt1000 9 ปีที่แล้ว +3

    Thanks for the tutorial. Have you tried the Tu-144D yet? I can get it so it doesn't tip back on the tail, but starting it is tricky, and if you use your normal view change key, you're permanently stuck looking at the ceiling. Wish I could figure it out because the VC is just as good as the others in this series.

  • @cboris7262
    @cboris7262 7 ปีที่แล้ว +1

    this is the most useful tutorial to date

  • @FSXNOOB
    @FSXNOOB 7 ปีที่แล้ว +1

    I did everything like you, but in the end, when i pull the throttle up it sounds to beep and does not go anywhere..

  • @Boredguy9000
    @Boredguy9000 9 ปีที่แล้ว

    Great tutorial. Using it on the current version of the plane. Buttons are a little different, however I am able to get to the exact same point as in the end of the video. However after a few seconds all the engines stop and come to a complete halt. Any ideas where that might come from?

  • @joecozzi3725
    @joecozzi3725 11 ปีที่แล้ว

    That and probably the Ilyushin 86 is my favorite plane.

  • @airwi3268
    @airwi3268 3 ปีที่แล้ว

    thank you for this tutorial. this airplane now a lot easier to start up..

  • @rederos8079
    @rederos8079 4 ปีที่แล้ว

    Have you tried manfred jahn c-47? That thing is also awesome, freeware worth like 30$

  • @GrosseFlotte
    @GrosseFlotte 3 ปีที่แล้ว +1

    Watching this during 1mil stream

  • @miguelleon5543
    @miguelleon5543 6 ปีที่แล้ว +3

    Dam your voice is so differnt than 2017

  • @FSXNOOB
    @FSXNOOB 11 ปีที่แล้ว

    Yes, only i', using the new version of the TU 154 dont know if that has to do something with it.

  • @Michaelorwa
    @Michaelorwa วันที่ผ่านมา

    Nice bro 👍

  • @AlexsFlyingClub
    @AlexsFlyingClub 9 ปีที่แล้ว

    Thanks for the tutorial! A very nice aircraft but difficult to get used to :)

  • @easychick1735
    @easychick1735 9 ปีที่แล้ว

    I am Having issues too,Great video by the way. Ok so every things is exactly the same until at the end where i have to shut down the APU. Right after i do that, all three engines quit. I am not sure if the generators are running or something?
    Thanks a lot.

    • @bruszli8216
      @bruszli8216 7 ปีที่แล้ว

      Generators have to be turned on and many other things as well.

  • @AmmoRacks
    @AmmoRacks 4 ปีที่แล้ว

    Holy shit phlop, thanks

  • @FSXNOOB
    @FSXNOOB 11 ปีที่แล้ว

    Nothing happens here when after the step NYC ? engine does not start up, all the steps before that are good & green..

  • @wavenine2749
    @wavenine2749 8 ปีที่แล้ว

    I could only get as far as engine 1 spooling up. It never fully starts and is just constantly spooling up. Is that a glitch?

  • @Master_Cheese-kf2mm
    @Master_Cheese-kf2mm ปีที่แล้ว

    the link is dead and is redirected to the malicious page.
    sadly someone did not save files in wayback

  • @lachicaearljohnl.5415
    @lachicaearljohnl.5415 3 ปีที่แล้ว

    GOOD VID BUd

  • @idkstillme4100
    @idkstillme4100 3 ปีที่แล้ว

    So this is the tutourial Swiss 001 watched, interesting.

  • @solcarzemog5232
    @solcarzemog5232 8 ปีที่แล้ว

    Great tutorial! I finally got the plane started, BUT, when I turn off the APU the plane shuts down: :-O why ?

    • @rodgerdodger7257
      @rodgerdodger7257 8 ปีที่แล้ว +1

      the author never turned on the generators and that is why it dying

    • @rodgerdodger7257
      @rodgerdodger7257 8 ปีที่แล้ว +2

      after you start the engines turn on generators they are three switches on left upper panel under horisontal bar.

    • @solcarzemog5232
      @solcarzemog5232 8 ปีที่แล้ว

      Roman Malekov Thank you Roman! That was it!

  • @carboncobra122
    @carboncobra122 9 ปีที่แล้ว

    hi i have a problem when i start the engines all is good but when i turn off the things i dont know whats ne name off them i mean at the end off this video :) so when i turn this of my the engines are down i dont know why i looked this video 5 times and ich try it but my engines are down :(

    • @bruszli8216
      @bruszli8216 7 ปีที่แล้ว

      Turn on the generators. Many other stuff are missing too.

  • @bruszli8216
    @bruszli8216 7 ปีที่แล้ว

    I have turned on the generators and flew, but the instruments were not working. Can anyone help me?

  • @rederos8079
    @rederos8079 4 ปีที่แล้ว

    View is not named in russian, thats some abrakadabra... For me it was easier to start from 3d cockpit, in 2d there is few bugs in fsx:se

  • @KristenV1
    @KristenV1 3 ปีที่แล้ว

    where can I download it?

  • @fsxguy234
    @fsxguy234 11 ปีที่แล้ว

    for some reason I turn on the plane it starts and works but then shuts down :(

  • @meVladowski
    @meVladowski 6 ปีที่แล้ว

    Oh my 2018

  • @rodgerdodger7257
    @rodgerdodger7257 8 ปีที่แล้ว

    bad start)) you never turn the generators on and autopilot systems on. you also shot down pressure heat off while shutting down the starters.

  • @Antoine00000
    @Antoine00000 9 ปีที่แล้ว

    Hiw do I center the ah

  • @oc101289
    @oc101289 11 ปีที่แล้ว

    this aircraft is very complicated, you need to understand russian and be trained for starting this aircraft, its a shame that you have to start it in cold & dark mode.

  • @85556
    @85556 10 ปีที่แล้ว

    generators!

  • @fefe8504
    @fefe8504 2 ปีที่แล้ว

    Russian planes