How to Replace the thermostat on the Honda Fit 2007 to 2013 4

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ก.พ. 2025
  • Do you need to Replace the thermostat the Honda Fit 2007 to 2013 but don't know where to start? This video tutorial shows you step-by-step how to do it!
    Our Honda Fit (2007 - 2013) manual covers petrol and diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-...
    What's covered:
    Honda Fit (2007-2013) Haynes Repair Manual
    Exclusions:
    Does not include information specific to Fit EV models

ความคิดเห็น • 14

  • @trolling583
    @trolling583 3 หลายเดือนก่อน +1

    upon closer inspection, if you noticed on 3:46 the thermostat gasket was positioned certain way, when you re-installed the gasket on 4:43 it looks like you installed the gasket the opposite way. not sure if this will be an issue but always put things back the way you found it. This video is sub-par with information but clearly lacks QA

  • @IAMSatisfied
    @IAMSatisfied ปีที่แล้ว +4

    I have a 2009 Honda FIT with the 1.5L engine, but my thermostat housing is very accessible behind the excess coolant bottle, on the front of the engine, facing the radiator. Two bolts, and viola!

    • @mg8720-u7j
      @mg8720-u7j 11 หลายเดือนก่อน

      That how it is on my 2013 so im not sure whats going on here. It was 2 bolts. Never even had to drain all the coolant out.

    • @ryantorchia3202
      @ryantorchia3202 4 หลายเดือนก่อน

      Same on my 2010 sport MT. I didn't even have to remove the splash guard, let alone remove the entire air filter housing.

  • @churchofseabass9227
    @churchofseabass9227 2 ปีที่แล้ว +3

    Warning!! This doesn't even mention the 4th thermostat cover housing bolt. 5 bolts all together, 1 on the harness, 4 on the cover. The one not mentioned is right underneath that boxed black wiring harness. You can remove that 4th bolt without removing the entire harness but you will need to push that harness up significantly there is a horizontally mounted bolt and a vertically mounted bolt that can be loosened at the rear of the boxed harness to make it easier to get to the top bolt, I use the little metal mount the wires were clipped to for leverage.
    Don't try to remove before that last top bolt on the back or you will mess up your housing.

    • @kbengson9163
      @kbengson9163 ปีที่แล้ว +1

      Haynes manuals are notorious for skipping steps, that is why I do not agree they are the best manuals around, or whatever their intro said.

  • @stevembugua7495
    @stevembugua7495 2 ปีที่แล้ว +1

    Can someone assist please. I have been trying to replace thermostat in Honda Partner 2008 but cannot remove the housing after loosening three bolts. How many bolts are there in total?

    • @paulc7226
      @paulc7226 2 ปีที่แล้ว +1

      Check the manual..... I recommend manuals by Helm.

  • @MrJeezus69
    @MrJeezus69 21 วันที่ผ่านมา

    Broke my housing cause they didn’t say there was 4 bolts instead of 3 that they show 😅

  • @paulc7226
    @paulc7226 2 ปีที่แล้ว +2

    This video is not accurate... I have a 2011 and it is a different configuration.

  • @adancuriel8597
    @adancuriel8597 2 ปีที่แล้ว +1

    The narrative destroys this video

  • @MATTHEW-cg9xq
    @MATTHEW-cg9xq ปีที่แล้ว +1

    They need to take this video down it’s all wrong

    • @xorbe2
      @xorbe2 10 หลายเดือนก่อน +1

      Looks like a 2007-08 Honda Fit.

  • @RossWilliams-kv1ww
    @RossWilliams-kv1ww 10 หลายเดือนก่อน +1

    Terrible video. Video shows only 3 bolts in the housing when there's 4