Volkswagen Golf (Mk5) glow plug module replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ม.ค. 2025

ความคิดเห็น • 12

  • @TefoLebeko
    @TefoLebeko 9 หลายเดือนก่อน

    Can you help me locate Glow plugs Module for Polo classic TDI 2004 model

    • @_LuisS
      @_LuisS  9 หลายเดือนก่อน

      From what I can find online it should be in the same place as the Golf..
      Not much to read about polo I'm afraid..

  • @charliecoco2115
    @charliecoco2115 ปีที่แล้ว +3

    Always warm the engine up before attempting to remove the glow plugs. Otherwise there's a good chance of them snapping.

    • @_LuisS
      @_LuisS  ปีที่แล้ว

      This was the glow plug module I was replacing.
      I did mention that on my other video when I replaced the glow plugs..
      Check it out..
      th-cam.com/video/4sThuCfgjjc/w-d-xo.htmlsi=lXAVcgVVs0eperDh

    • @charlieburton9967
      @charlieburton9967 ปีที่แล้ว

      Battery clamp is mot fail.

    • @_LuisS
      @_LuisS  ปีที่แล้ว +1

      It's actually something I forgot it was missing.. Need to get that sorted..
      Thanks for letting me know.. I had no idea..

  • @Jonodrew1286
    @Jonodrew1286 9 วันที่ผ่านมา

    👍👍

  • @MiguelAngeldeM
    @MiguelAngeldeM 11 หลายเดือนก่อน

    Hi, Thanks for the video. Did the light show up again after some days or the problem was totally fixed?. thank you ¡¡

    • @_LuisS
      @_LuisS  11 หลายเดือนก่อน +1

      The light did come on again after a few days.
      Turns out the problem was an exposed wire on the engine loom.
      Check out this video.
      th-cam.com/video/mm2U_ICWyBo/w-d-xo.html
      I also found that the glow plugs I've fitted were the wrong ones. The car has a 7V system and the glow plugs I've used are only 4.4V.
      I'm replacing glow again for the 7V ones again tomorrow. But after replacing the loom car has been fine with no engine light warning.

    • @MiguelAngeldeM
      @MiguelAngeldeM 11 หลายเดือนก่อน +1

      Thank you so much. . i´ll double check the wires then. ¡

    • @MiguelAngeldeM
      @MiguelAngeldeM 11 หลายเดือนก่อน

      how did you find out??

    • @_LuisS
      @_LuisS  11 หลายเดือนก่อน +1

      It was suggested by a mechanic that the wires could have broken.
      So I bought the loom and when I removed the old one I noticed the damage..
      And I noticed I put the wrong glow plugs during research and I then realised I had bought the wrong ones..