While your there grab u a quick ratio steering box out of a 96-98 keep grand Cherokee 12.7:1 box . 💪🏻 the 94 and down jeep Cherokee has a upgraded steering shaft for the Gbodys to .
Man trying to find 2wd spindles where im at in michigan feels like ill lever find any. Even went to the pull and save nothing but 4x4s. But i did find set of 4 camaro calipers and brackets. Even get a posi and backing plates for rear end.
Good vid brah! My first video was me getting the blazer setup I still got it 😂 I’ll eventually switch to them I think it will barely clear my rally’s that’s why I didn’t go right off the bat. you got 24s so you good lol. Looking forward to the next video! 💪🏾
Weird, because I didn’t…but I also didn’t install the spindle and brakes until I installed my upper and lower tubular control arms and QA1 coilovers so that’s probably why I didn’t notice but this is the first time I’ve heard it 🫡
@@87SSBOI dumb me. I forgot a had gbody drop spindles on. so that explains the ride height. but the stance is wider about an inch. I had to run spacers to clear end links now i dont.
F slotted rotors there really just for looks I’m not a fan of them because they create many edges for the pads to rub on and imo causing excess brake noise. I’m not a fan of any unnecessary brake squeaks / noise, and I find that the slots on the rotors do just that so stay away from slotted rotors just go with drilled if you can find them or honestly just a regular solid rotor is all u need the drilled and slotted are manly just looks if your worried about cooling run you a brake duct from allstar performance or summit etc
Every little project makes a big difference.
Yessir🫡
It’s good you took the Hub bolts. The new hubs don’t come with bolts. Mine didn’t anyway.
Whewww, glad I did cause I didn't know...hubs, rotors and pads supposed to be here tomorrow😃
I knew where you was at when I heard them jets flying. Good Find 💯💪🏾
😂😂😂…man them thangs annoying af
Nice work the back not hard just have to pull the axles👍🏿
Word!!! I’m on it!! All brake parts on sale this week at my yard for $15…I’m going back tomorrow
Clamp a pair of vice grips to the cotter pin then use a hammer or a pry bar against the vice grips.
Them thangs gave me 🤬🤬🤬
While your there grab u a quick ratio steering box out of a 96-98 keep grand Cherokee
12.7:1 box . 💪🏻 the 94 and down jeep Cherokee has a upgraded steering shaft for the Gbodys to .
Got the shaft and box already…thanks 💯
That yard boujie.😂 They have stands under all the cars. Yards up here cars be on the ground or random car rims under them.
😂😂😂 that’s why I like that one the best
The calipers will clean up, easily.
Man trying to find 2wd spindles where im at in michigan feels like ill lever find any. Even went to the pull and save nothing but 4x4s. But i did find set of 4 camaro calipers and brackets. Even get a posi and backing plates for rear end.
Nice
Good job bro. Been on that run a few times. :)
✊🏾🫡
U can use the front and rear of a blazer and I think you can use the rear from a Camaro 98-02 I believe
Facts! Yes I have the rear blazer as well just haven’t installed yet
Thanks for thre info! heard the G Bodys are the same as 1st gen s10s
How much did the spindles and calipers end up costing you boss?
What’s up! I paid $60
U want a 5.7 vortec headed sbc. There on 96-99 trucks and Escalades.
Good vid brah! My first video was me getting the blazer setup I still got it 😂 I’ll eventually switch to them I think it will barely clear my rally’s that’s why I didn’t go right off the bat. you got 24s so you good lol. Looking forward to the next video! 💪🏾
Yessir!! Ay bro I’m pretty sure they fit with the factories cause the rotors are the same size and if I’m not mistaken, the blazers came with 15s
@@87SSBOI yeah. but hell I want brembo too 😂 or camaro brakes either way i need to stop lol
@@mr.g.d.i.y 😂😂😂…yea u go Brembo u gonna need 17 or 18 at least
@@87SSBOI yeah that’s why I gotta wait until I get some 24s lol.
what size socket where those castle nuts. gotta make sure i got the right size
I’m sorry, I can’t remember for sure but I think 18 or 19mm
No cutlass parts or parts for the other vehicle?
Oh nahhhh NEVER cutlass parts…
When are you going to put your gas saver on the road?
Pretty soon but look like it ain't gonna be mine any more...my son getting his license soon...guess I gotta find me another one
Notification squad 💪🏾
Yessir 👌🏾✊🏾✊🏾
Appreciate that feedback earlier too
6.0s out there Fa shoooo.
Yessir
And also i had got my hubs new off ebay too
Yea same I did, went with Detroit Axle…didn’t wanna trust the yard hubs
What did that all cost?
$60
@@87SSBOI ohhh bet to the junkyard I go
@@DMDAUTOLLC 😂😂😂…gotta go back and get the rear…$60 for that too
I'm getting mine off the same blazer
🫡
keep your work
🫡
What does this do?
Better braking and upgrade to wheel hub
Umm. No one ever mentions that you will get an inch lift and wider front stance with these
Weird, because I didn’t…but I also didn’t install the spindle and brakes until I installed my upper and lower tubular control arms and QA1 coilovers so that’s probably why I didn’t notice but this is the first time I’ve heard it 🫡
And front is lowered like 2.5 inches now on the coilovers on 24s
@@87SSBOI dumb me. I forgot a had gbody drop spindles on. so that explains the ride height. but the stance is wider about an inch. I had to run spacers to clear end links now i dont.
@@1godgodgodgodgod word!!!
F slotted rotors there really just for looks I’m not a fan of them because they create many edges for the pads to rub on and imo causing excess brake noise. I’m not a fan of any unnecessary brake squeaks / noise, and I find that the slots on the rotors do just that so stay away from slotted rotors just go with drilled if you can find them or honestly just a regular solid rotor is all u need the drilled and slotted are manly just looks if your worried about cooling run you a brake duct from allstar performance or summit etc
Word 👌🏾
Where’s your caliper hardware man ? Should have kept all the caliper hardware right in them u gonna need the bracket bolts and the pins .
All that was in my bag…lol…Preciate ya
Grab me a set bro
not an airplane,,its an AirForce F35 fighter jet.
Does the Navy fly AF jets?
same F35 Phantom@@87SSBOI
Go ahead and put you an LS in that Monte Carlo
Maybe later
Pull that 6.0 up outta there, break me up!
😂
@87SSBOI keep up the good content I injoy your channel
@@BillTerwilliger-u7e I appreciate the love 💯
Good job bro. Been on that run a few times. :)
🫡