VW Polo MAP Sensor Replacement
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Hey guys. This video is me changing out the MAP (Manifold Absolute Pressure) Sensor on my 2005 VW Polo 1.2. It is quite an easy job and requires little skill. I believe it is a similar process on the VW Golf, but obviously the sensor will be in a different position.
From my channel title you can probably tell I am NOT a professional mechanic - instead I am just a guy with a camera documenting his experience in the hope to help others. There is limited information on the Polo so hopefully this will be helpful to others.
A couple of years back I didn't have the courage to even change the wiper blades on my car, believing cars were just out of my depth, but now I do all sorts of repairs on my car. TH-cam has helped me greatly, through watching videos of all different cars and learning from others who are pretty amazing with cars - it has empowered me to work on my own car. I hope to add to the wealth of knowledge online with my peanut brain.
![[Re:all TREASURE] EP.6 in 방콕ㅣ🚩 쩡캠의 방콕 투어 빵 마이 와이 👍](http://i.ytimg.com/vi/uyFw-nItA_s/mqdefault.jpg)
Well done.Keep on doing this.
Thanks :)
Cleaning throttle body can disturb some parameters, but in time the parameters will self calibrate in the ECU. I had the same problem after cleaning the throttle body.
Hello, I also cleaned the MAP sensor, it was more dirty than yours, the error code did not disappear, so I deleted with OBD2, you have good videos BIG LIKE
Which OBD2 scanner do you use?
@@uberscuba4796 I think basically any of them will work, as long as it isnt the cheapest one available. I bought mine from biltema. (A Swedish retailer that has stores in nordic countries) I think the model they sell is a rebranded chinese model, which is why probably most will work.
Great video man cheers. I was trying to find where the mass air flow sensor was for the polo and i found this. Awesome
did you happen to find where the mass air flow sensor was. I'm searching for it in my own car at the moment. If you dont mind me asking what issue were you having that made you search for it, just wondering if it is the same issue i'm having. Cheers.
Even iam searching for map sensor in polo
If you experience difficulty undoing the connector, push it fully 'Home' first, then try again. If you're still struggling, heat gently with a Hairdryer and repeat
As a caveat, not all models are fitted with a (mass air flow) sensor, many merely rely on your throttle body sensor, and vw dealerships are little help, as they will simply charge you the earth to solve a common fault that not even the manufacture has a definitive fix for. Best advice, check 1 of the many good forums, many of which people have put some good illustrations. Happy hunting.
Great advice! Cant afford to take my car into a dealer because costs rack up so quick. True, you can get alot of good info online about problems
You are not Professional but You are good analyser.
In the market many technicians are just looking at the Checking Computer and does whatever it says. But Diagnostic Computers are not smart enough to identify the main problems. Your video is very well to clear the path of ignition problems. Thanks a lot.
I want to know where petrol sensor located in the engine of polo Playa 1, 8 injections
Cheers, I was not aware of where to find the MAF on a Polo.
Mr GShocker Happy it informed you :)
I assume that your polo is a 1.2 I can't find the Maf ony wife's 1.4.
yeah 1.2
Mr GShocker Did you locate the throttle body? If it is a MAP sensor it will probably be near there. You might also want to check near the air filter if they used a MAF..
Hi why wouldn't the engin of my polo Vivo 2014 model start. It only crank but wouldn't start
Hey i have a polo 1.2 tsi 2017 steam was coming out of the hood and what i think it is a map sensor it the back off the engin was brokek now the car whant start
I check for overheating butt there is now milky on the tipstick and i check my plug it getting wet ...whats wrong with my car
The vw (polo) 1.2 , 1.4 16v, 1.6 16v doesn't have a MAF. Am i right? :)
IM26C4U n
IM26C4U yes
İsterseniz bu kanalada destek olabilirsiniz. Vw LUPO/POLO Map sensörü temizliği
th-cam.com/video/G2n9Zz5TOG8/w-d-xo.html
Yes
hola soy del esta de mexico resiente mete acabo de complar un polo 2003 pero no ensiende solo da marcha pero solo ase un sonido como si no enblagara la marcha pero disen q la marcha no es q me puedes asegurar q sea .
like to watch your videos as I have the same polo and a slight rough idle. to clear ecu you could have used a LONG screw driver and touched both + - to clear memory
+george stronach I am happy you enjoyed the videos...I made them because there wasn't many videos for this car! I didn't think about using the long screwdriver method! Thanks for the tip ;)
Can anyone recommend a cheap OBD2 scanner for the polo 9n. VCDS is too expensive for me. I just want something basic that works with VAG cars
I have a 9n1 1.4. Does this car have both a MAP and a MAF sensor? Thanks for the great vid.
No, just a map sensor
good vid thx. Could you tell me where the mass air flow sensor is located?
Hey, this car doesn't have a MAF sensor. But if your car does it'll be just after the air filter housing most likely
Cheers man I was going crazy looking for something that isn't there. Thanks again.
Can you addapt the Throttle Body after cleaning it by resetting the ECU (connecting the + and - wires). Or does it only works with a diagnose program like VCDS?
Hey, im almost certain you can only do it with a program like VCDS :(. But they are pretty cheap if you know where to look
+Messed Up Mechanic Can you point out where the MAP sensor is located?
Здравствуйте пожалуйста wolkswagen polo не тиянит гяга нет едите медленно?
i had similar issue engine running rough on idle also when accelerating, engine light came on, got error read replaced all sparks and coils ran great for a while then light back on and weird issue with accelerating going from 1st to 2 just really stuttery and lumpy, code read again and now lambda o2 sensor issue apparently possibly caused by first issues.
You think it is a problem with the coils/sparks again?
Originally engine light came on, an error code lead to new sparks and coil packs all four, ran great for a bit then light back on and new code read as possible issue with lambda sensor mechanic reset code revved engine etc runs a little better but slightly jerky in low gear so maybe is lambda.
Interesting...maybe it is lambda. it is not expensive to change i think
I think it must be, but im really thinking of getting rid as it done over 141,000 miles and its got yet another problem, sounds like im going over a bucket of bolts when i go over a bump now, so I think its the end :-(
Probably....141k miles is a lot for polos, they are generally quite problematic. nice analogy about the bucket of bolts :)
hi ive a polo 1.6 2008 model the car back fire or loose power when i drve EPC light comes on espicialy when i drve hundret o 120
but when idrive 80 nothing happen and the iddle sometimes drop please advice what will be.ive change petrol pump an plug wires even the cam sensor but still doing the same please help me
please advice me
Quick question. Have you changed your Oxygen pressure sensor about changing the Map sensor
I have not touched the oxygen sensor
I can't find my MAP sensor on my Cross Polo(Polo Dune). Great video though!
@@sydwelltlhola4211 engine !? Code engine !? Year !
Nu este in garantie masina,?la cei 53000km,sau masina a stat mai mult in garaj?🤔🤔🤔
I have a 95 VW cabrio , would you know where's the map sensor located ? if you can help me I would appreciate alot thank you
+Krys Brandon Lestat Hey, Im pretty sure they used a MAF sensor not MAP. The MAF will most likely be located just after the air intake
Hi my brother has a skoda fabia 1.2 will it be in the same location
Yes. You may have a different lid on the engine (with air filter)
Hi I have the same issue with my VW POLO 2006 petrol. My car will start fine in morning and it will run like 10 minutes without any problem,after that it will start to jerk and stall.Also it will work fine if i stop engine and restart.
This is happening randomely after a cold start.
The only code i found was 01314 and i changed the throttle body ,one week it worked well and again started the same problem.
If somebody can help me to diogonise the problem will be appreciated😊
Mine only fluctuate while accelerating, can u help with a suggestion !?
It could be the MAF sensor instead
@@brunskin8355 no MAF on the 1.2 engine... Only MAP
Enjoying your videos bro. Grab a Mk4 Golf diesel and do videos ;)
+ThePhonecat haha yeah dude maybe in the future, wanna get rid of this pos :) . Glad you liked the videos tho!
I tried to pull out my map after I took out the screws and it’s stuck on and slight movement best way to pull it out ?
which part is stuck? the electrical connection? it wont lift out?
Messed Up Mechanic you know the MAP sensor bit that is inside with the rubber sealant it’s stuck on quite tight, I feel like it’s stuck because of the rubber so I wondered if there’s was any possible way to force it out since it’s not moving and I’ve ordered a new one !
Messed Up Mechanic it isn’t the electrical connection that’s easy to detach
Vw 1.2 cgp engine, location map sensor
??Is your EPC Ligt turn On?
+Eduardo Solano Hi, no EPC light
Eduardo Solano i have epc problem for two yewrs and no one could fix it. Plz help of u nu anything about it
More videos please
Hi I have a question,I have a polo diesel 1.2 smokes a lot a black smoke from exhaust,replaced new injectors,serviced the throttle body and cylinder head,would there be a problem with the map sensor ,how to identify it and also some time while driving i get the cylinder 2 contribution balance error with the spring symbol in dash board and it goes away after some time.will that be a serious issue,after changing 3 brand new injectors it is happening
also it idle in 1200 rpm and sometimes rough idle is there
I doubt it would be the MAP. Could it maybe be the glow plugs? Does it have problems starting?
no problems in starting
how much did your map sensor cost mate
Hey, I think it was £35ish a few years back for an aftermarket sensor.
If you are in UK - I checked (for my car) you can get a similar one at carparts4less for £40 after using their discount codes.
Messed Up Mechanic thanks I've the same car same problem I've tried everything you had as well lol is yours still fixed ?
soz getting bk late was on hols. It did work for the problem I had...tho bear in mind thses polo 9n's are known to develop timing chain slack which causes similar symptoms
Messed Up Mechanic right Thankyou
Hello code défaut pour mon voiture
Si vous avez un conseil m'a donné
P0123
P0222
Capteur de pression ou autre
Merci
estaria mejor el video si tubiera la traduccion a español
I HAVE A VW CITY GOLF 1600I MARK 1 MADE I SOUTH AFRICA CAR RUNS WELL THEN ALL OF A SUDDEN CUTS OUT AND A BUZZER SOUNDS THEN RUNS AGAIN PERFECTLY UNTIL THE NEXT TIME IT CUTS OUT THIS IS A REAL PAIN IN THE ASS
Sorry I have no idea what it might be. But im pretty sure it not the maf or map sensors. City golfs look very cool tho..wish they had them in UK
sqiu
B
Fucking shit ass mechanics left my MAP sensor without screws it just sits there in the socket and i have issues with throttle and idle, now i cant find anywhere to buy those exact screws with T20 head and fillet, ive tested dozens of screws nothing fits, nothing grips.
Oring îs bad!