I've been waiting for good weather to attempt this and the number of times you say EASY in the video is very encouraging as I have limited resources and working outside.
if it doesn’t line up back to factory spec, would it be a problem. i took the springs out and forgot to market it and put it back how i see fit, now i think my car wobbles when going high speeds,,, maybe it’s in my head, what’s ur thought ?
I thought it was good. I certainly knew a difference. The previous owner of mine towed a caravan around Australia. That could have weakened the factory fitted springs. But to answer your question, good and noticeable that they had been changed. I always had a bit of rocking and also changed my sway bar linkages- see another video for that.
Without the torque wrench, what do you recommend for tightness? Snug as in all my might or 1/4 turn after gets snug? I have 2006 pathfinder and it failed inspection due to broken rear spring. Not sure how I can make the marks with it being broken and collapsed. Thanks for your response.
I've been waiting for good weather to attempt this and the number of times you say EASY in the video is very encouraging as I have limited resources and working outside.
Thanks NNM, I am bout to do mine in the next couple of weeks. Cheers
Armada is just the V8 version here in the states, it have a regular pathfinder
the v8 pathfinder exists out here in the states too, its just harder to find
@prod_vello Yes, it is the Armada. I can find them easy enough just most are 2wd
if it doesn’t line up back to factory spec, would it be a problem. i took the springs out and forgot to market it and put it back how i see fit, now i think my car wobbles when going high speeds,,, maybe it’s in my head, what’s ur thought ?
I need heavy duty on my infinity qx 4 1999 I need rear coil spring heavy duty,ty
U didnt show the hardest part...the alignment of the bottom bolt.
How did you find the comfort of ride on Lovells springs when car is empty?
I thought it was good. I certainly knew a difference. The previous owner of mine towed a caravan around Australia. That could have weakened the factory fitted springs. But to answer your question, good and noticeable that they had been changed. I always had a bit of rocking and also changed my sway bar linkages- see another video for that.
What the model number of the springs?
Who is the manufacturer of those springs?
Juan Garcia Lovellsauto.com.au
Do I need a spring compressor tool?
No you do not. I had a set ready. Move the control arm down and the will slip out. It will on the 2008 model. Thanks for watching.
Without the torque wrench, what do you recommend for tightness? Snug as in all my might or 1/4 turn after gets snug? I have 2006 pathfinder and it failed inspection due to broken rear spring. Not sure how I can make the marks with it being broken and collapsed. Thanks for your response.