By far the best, most detailed video on this subject. I just changed mine today on my 2011 Nissan Pathfinder and I played this video as I replaced it. Perfect!
I liked this video, then unliked it so I could like it again. This video is awesome man. Thank you for your expertise and making it simple and straightforward. In my opinion the most crucial part is getting that spring centered! AWESOME VID, GOD BLESS YOU 🙌
Excellent video. I changed mine today. Without seeing this video I wouldn't have the confidence to do it myself. It all worked out perfectly. Thank you!!!
Dealer wanted $850 to replace my clock spring. Found Clockspring Experts online and they had the part needed for $180. Took me about 45 mins to do while watching this video while I replaced it. Thx!
Thank you for sharing this great guide video on replacement especially the part on the turns and centering the clockspring as that step can be overlooked. GREAT job👍🏼
Very good video, I had to install the steering wheel sensor, I found that out as this video omitted that step, just 3 screws and all is well, thanks again.
ok first of all thanks for the video. J Carapiet says below that where he lives in the Gulf Pathfinders don't have the angle sensor system, so, for us that do you'll need to transfer a piece from the back of the clock spring you're replacing to the back of the new clock spring you're putting in. 12:32 of the video shows the gray and yellow connections but next to those is where the other plug for the angle sensor goes. The plug that's sticking straight up. Remove 3 tiny Phillips head screws and transfer the white plastic connector piece for the angle sensor plug. Repair fixed my flashing air bag light, and my horn is working again
Wish I Would Have Read This i Installed As It Was Installed InThis Video But Now The Vdc Ligth Wont Go Off,,,,,Now I Know Why I Will Remove And Reinstall
When you come to Romania, the first 10 beers are on me. You saved me a TON of money. My 07 pathfinder had an error with the right side curtain airbag module and no electrician solved the issue, and they checked every bit of wire. I made the last bit you had in the video, the 5x ignition diag mode and the error is gone! thank you a lot!!
Great video. Should be able to give more than one thumbs up. I managed to finally identify the right part and to look it up online. It's crazy how difficult it is. I guess that's how big automotive companies like it to be t overcharge for parts.
@@carapiet We'll see. I'll have my mechanic deal with it. For now I'm happy I seem to have managed to find the right part. For something requiring to touch less critical equipment like in this case, I'll probably try on my own. But I rather have a mechanic disassemble the steering wheel of the car my wife and kids use every day. Thanks again for the video. Much appreciated.
Great video but please note folks this clock spring video is for Pathfinders that dont have VDC which utilizes a steering wheel angle sensor. You will need a different clock spring with a narrower 1.5" diameter center hole so you can swap out the steering angle sensor for the VDC.
@@OGfamilytreerecords5913 I don't have the box or the paperwork anymore. I think the main issue is that some websites were listing it as the same part.
@@ratking948 I found that to be the big issue. My only advice is to look closely at the pics and hope the one pictured is the one they send. Wish I had a better solution. Sorry.
Thanks for the positive comment. This is the part number on Aliexpress: 25560-R07AB 25560R07AB ZP51D-25560-R07AB For Nissan Free Shipping. hope it helps
Super video!! DON'T DO WHAT I DID!! I should have left on the wheel nut a couple turns when bumping off the wheel... I ripped the clock top off and now am having a new one overnighted because I was only looking to troubleshoot. Leaving a couple turns on with the wheel nut would have saved me from SNATCHING the wheel totally off and ruining what may have been a good wheel clock 🤬 Life's an adventure 🤣🤣🤣 2014 frontier
Great video !! Looks like it is a common problem for the pathfinder.. me and my friend have the same problem. I am in Doha as well and same model 2008 SE. Can you share the part number you ordered from Alibaba?
Can you help me in getting this component. Unfortunately it's not available from Alibaba anymore and other websites either not deliver to Dubai or are shady. I have a 2007 LE Pathfinder American specs not the R series. Thanks
Awesome tutorial. I have the same problem from my 2011 XTerra and do need to change the clock spring. Please provide link as the ones from eBay and dealership are way too expensive. Thanks.
The part number might be different! But match the pins as described in the video. I got this part from Aliexpress which is alibaba.com. Good luck and thanks for the encouraging comments Cheers
Hello Mr. Carapiet this is a great video. I have a question. Can you get a different yr for the clock spring or does it have to be the yr the vehicle is. I have a 2007 and could only find a 2006 but when I tried it it didn’t work.
i really appreciated, about your effort to give us knowledge. i have same issue with pathfinder 2009 se model. will it fit for 2009? and any specific link for this product in alibaba? Thank you
Hello I did this job month ago and it was successful thanks to you ..thank you . but I couldn’t stop the airbag light gone . with you’re process .on the switch is there any different way to do it ??
@@carapiet I do replace the air bag from jonkie part few months ago from another frontier maybe that’s way ..I can’t turn light off …other than that it’s working perfect 👍 thanks
What happen to the steering angle sensor? Make sure the two prongs fit into the two slots. take off bottom of old clockspring and add to new with three screws.
I’m in the Middle East and the Pathfinders here don’t come with Steering Angle Sensors! However the wiring is there if anyone wants to add that on as a after sales add on! Cheers!
The video provides the repair is easy to follow instructions, but I do not recommend buying the part off of Ebay or Ali Baba. Since you are doing the repair yourself and the clock spring might have the ABS system tied in (his does not look like it has the angle sensor attached like mine did), buy an OEM part.
What is the purpose of the steering wheel angle sensor? I see that it was left unplugged, by what I'd assume is someone who did the work previously. You can clearly see it was never "unplugged" in this video, and it's seen at 10:04; the other smaller white plug to the left of the plug that was just removed. And then at 12:54, you see it was tucked away when the assembly was being re-installed.
@@dyip32 It's an annular piece that has the wiring that connects to all the commands on the steering wheel. Therefore, per se, it's not that important. It all depends what doesn't work in the steering wheel sensor. I have had the one in my Pathfinder 2010 model not functioning properly for several months, but the only issue is that the honk doesn't work. I did not replace it because the original part is crazy expensive and didn't have the time to look for the right part online. Thanks to this video I seem to have finally found it. If you want to save money, but be safe, you can buy the part online, but have your mechanic confirm it's the right part, and have him install it. That's what I plan to do.
My Pathfinder is a Middle Eastern SE model and didn’t come with the feature “steering angle sensor” in 2008! But it does have the wiring if I wanted to add on that as a after market feature.
Hello Now after about 8 months let's know your feedback and experience? Specially is there anything abnormal when you steer like any noise or something?
Yes, so some of the wires in the clock spring have lost their contacts and those control buttons have stopped working! It is only time before the airbag probably will stop working too. You can wait a while if the control buttons that are not working are not that important to you
Very nice explainable video, but you didn't install the "steering wheel angle sensor" nor did you put the "white" wiring hornist at the left top into the steering wheel angle sensor, on the clock spring and without doing this, there will be a light on the dash board that will not go off !!
Hola amigo, a mí me pasó lo mismo, recuerde comprar la pieza que corresponde a su versión del vehículo, ya que hay una versión que no tiene el acople para el sensor de ángulo de dirección, el computador no reconoce el giro de la dirección y enciende esas luces, después de cambiarlo también es necesario programar el sensor
It may just be an issue with the sensor. It may not be necessary that you change the airbag. In both my cars, the dashboard shows an issue with the airbag. But that's a sensor fault, and the airbags are fine and would deploy as needed in case of accident. I recommend you check with your mechanic first, as long as it's a good one that you can trust.
I just changed mine out and had to remove the old steering angle sensor, and put it on the new clock spring. Worked like a charm! Thanks for the info on the diagnostic mode to clear the airbag light! My $300 code reader wouldn’t clear the light, but after a few cycles of the ignition and a start… light went off!
Make sure that wires and connectors under your seats are all connect good and not frayed or pinched. I had such a problem with my passenger airbag and light kept flashing. Dealer want $2500 to replace entire seat. I discovered the cable/wire was pinch on the rail that the seat slides forward and back. Moved it and zip tied it away from the rail and blinking light went out and everything works perfectly.
Well first the volume control, then after some time the cruise control on the steering wheel stoped working and then after a few years even the horn stopped working.
The vehicle is still drivable, the steering wheel will still steer, however ultimately all the electrical switches including the airbag might stop working!
By far the best, most detailed video on this subject. I just changed mine today on my 2011 Nissan Pathfinder and I played this video as I replaced it. Perfect!
Thanks for the encouraging comments
Excelente! Thanks.
did you do your 2011 Pathfinder with 3+8 pins part or 6+8?
Definitely not a 10mm nut holding wheel in place it’s a 19 but a great video and very detailed
I liked this video, then unliked it so I could like it again. This video is awesome man. Thank you for your expertise and making it simple and straightforward.
In my opinion the most crucial part is getting that spring centered!
AWESOME VID, GOD BLESS YOU 🙌
Thank you for your encouraging remarks!
Life (and pocket) saver! Thanks for the best explained and detailed tutorial. Did it by myself
I’m glad it worked out and thank you for the encouraging comments
Cheers
Thanks for the video, saved me from a headache fixing my dad's '07 Frontier which has the same steering setup. Saved at least $800.👍
I am happy it worked out for you!
Excellent video. I changed mine today. Without seeing this video I wouldn't have the confidence to do it myself. It all worked out perfectly. Thank you!!!
Dealer wanted $850 to replace my clock spring. Found Clockspring Experts online and they had the part needed for $180. Took me about 45 mins to do while watching this video while I replaced it. Thx!
Glad it worked out and you saved money
Did mine yesterday. THANKS for the video. Helpful hint: Make sure you get the gray and yellow combination plugs FULLY inserted back into the socket.
Fantastic video instructions, very detailed. Excellent teacher and it worked exactly as you demonstrated. Thank you very much
Thank you for your encouraging comments and I’m glad your repair was successful
Cheers
Thank you for sharing this great guide video on replacement especially the part on the turns and centering the clockspring as that step can be overlooked. GREAT job👍🏼
Thanks for the encouraging remarks.
So far, the best video I have seen on the this repair. Thanks for a great tutorial!🤓👏🏼
Thanks for the positive comment and feedback.
Legend! Thanks for the video. From a non mechanically minded person, I followed your video and it worked perfectly!
Glad to hear that!
Best video on this issue...by far. Thanks ! I watched other 6 videos, and they are lacking one thing or another. This video is best.
Thank you for the encouraging feedback!
I wished I found your video 2 hours ago! Would have saved me getting angry at the airbag release mechanism. LOL. Thank yoU!!!
Very good video, I had to install the steering wheel sensor, I found that out as this video omitted that step, just 3 screws and all is well, thanks again.
Thank you so much sir very easy steps to follow I just did mine today and go horn and cruise control running again 🎉
Thank you for the positive feedback! I am glad that it helped you and all is working again
Yep, another one completed, now everything works! Many thanks for your excellent video! John.
You’re welcome
Great video, clearly explained the steps and then showed it fixed your problem.
Thank you for your positive comments
Thank you for the great video! This really helped when replacing the clock spring on my Xterra.
Thanks for the encouragement
ok first of all thanks for the video. J Carapiet says below that where he lives in the Gulf Pathfinders don't have the angle sensor system,
so, for us that do you'll need to transfer a piece from the back of the clock spring you're replacing to the back of the new clock spring you're putting in. 12:32 of the video shows the gray and yellow connections but next to those is where the other plug for the angle sensor goes. The plug that's sticking straight up. Remove 3 tiny Phillips head screws and transfer the white plastic connector piece for the angle sensor plug.
Repair fixed my flashing air bag light, and my horn is working again
Wish I Would Have Read This i Installed As It Was Installed InThis Video But Now The Vdc Ligth Wont Go Off,,,,,Now I Know Why I Will Remove And Reinstall
Fantastic video , very detailed thank you. A lot of youtubers could learn from you.
Thank you for the encouraging feedback!
Thank you very much for taking time to make this video I fix my 2007 pathfinder thanks to this video.great video
Thanks for the positive feedback and encouragement
When you come to Romania, the first 10 beers are on me. You saved me a TON of money. My 07 pathfinder had an error with the right side curtain airbag module and no electrician solved the issue, and they checked every bit of wire. I made the last bit you had in the video, the 5x ignition diag mode and the error is gone! thank you a lot!!
I’m pleased it worked for you and thanks for the encouraging feedback, cheers!
Excelent!! Tutorial the best today change my clock spring steering, thank you so much!!
Great video, well explained. Easy to follow steps. Thanks
Thanks for the encouragement
Great video. Should be able to give more than one thumbs up.
I managed to finally identify the right part and to look it up online. It's crazy how difficult it is. I guess that's how big automotive companies like it to be t overcharge for parts.
Hope all goes well with the repairs
@@carapiet We'll see. I'll have my mechanic deal with it. For now I'm happy I seem to have managed to find the right part. For something requiring to touch less critical equipment like in this case, I'll probably try on my own. But I rather have a mechanic disassemble the steering wheel of the car my wife and kids use every day.
Thanks again for the video. Much appreciated.
having the same problem with a 2007 pathfinder In Doha as well, thanks for your help.
Very helpful and easy to follow - thank you!
Thank you for the detailed video. very helpful!
Best Video I have seen easy to understand...thanks Boss👍👍👍👍👍
Thanks for the encouraging comments!
Best video for this repair im having that same problem, need to buy the part try to replace it.
Thanks for your positive comment!
Saved me some money, I was going to buy the whole clock spring for $250...now I's going to cost $60...thanks.
Glad to hear that!
Thanks very much!! Helped out tremendously
Great video but please note folks this clock spring video is for Pathfinders that dont have VDC which utilizes a steering wheel angle sensor. You will need a different clock spring with a narrower 1.5" diameter center hole so you can swap out the steering angle sensor for the VDC.
Do you have a part number or link to part?
@@OGfamilytreerecords5913 I don't have the box or the paperwork anymore. I think the main issue is that some websites were listing it as the same part.
I can’t find one to order that specifies its for the VDC version that I need. Any advice?
@@ratking948 I found that to be the big issue. My only advice is to look closely at the pics and hope the one pictured is the one they send. Wish I had a better solution. Sorry.
Nice 👍 pretty good detail very helpful!!
Thanks for the positive feedback
Perfect video, exactly each step.
Thanks for the encouraging comment
Helpful video, God bless you brother.
This was a great video. You made it look simple.
Thanks for the positive comment. This is the part number on Aliexpress: 25560-R07AB 25560R07AB ZP51D-25560-R07AB For Nissan Free Shipping.
hope it helps
This is the part number on Aliexpress: 25560-R07AB 25560R07AB ZP51D-25560-R07AB For Nissan Free Shipping.
hope it helps
Thank you for the encouraging feedback!
Good and Great job you are perfect congratulations
Excellent video!!! You have saved me so much money! GOD bless 💯
Thank you for the positive feedback
Very useful video 👍
Thank you very much
You’re welcome!
Super video!! DON'T DO WHAT I DID!!
I should have left on the wheel nut a couple turns when bumping off the wheel... I ripped the clock top off and now am having a new one overnighted because I was only looking to troubleshoot. Leaving a couple turns on with the wheel nut would have saved me from SNATCHING the wheel totally off and ruining what may have been a good wheel clock 🤬
Life's an adventure 🤣🤣🤣
2014 frontier
Straight forward … thank you!
Great information. Thanks!
Thanks for your video I fix my Nissan Frontier 2011
Glad to hear that!
Awesome video 🙏
Great video !! Looks like it is a common problem for the pathfinder.. me and my friend have the same problem.
I am in Doha as well and same model 2008 SE.
Can you share the part number you ordered from Alibaba?
Thanks for the positive comment! This is the part number: 25560-R07AB 25560R07AB ZP51D-25560-R07AB For Nissan Free Shipping.
hope it helps
Great video !
Thanks!
Can you help me in getting this component. Unfortunately it's not available from Alibaba anymore and other websites either not deliver to Dubai or are shady. I have a 2007 LE Pathfinder American specs not the R series. Thanks
Awesome tutorial. I have the same problem from my 2011 XTerra and do need to change the clock spring. Please provide link as the ones from eBay and dealership are way too expensive. Thanks.
The part number might be different! But match the pins as described in the video. I got this part from Aliexpress which is alibaba.com. Good luck and thanks for the encouraging comments
Cheers
GREAT VIDEO!!! Do you know what a angel sensor is? The part I ordered said without angel sensor I have a 2010 LE do I not need that?
Some European models have the angle sensor but you don’t really need that
Thank you
Hello Mr. Carapiet this is a great video. I have a question. Can you get a different yr for the clock spring or does it have to be the yr the vehicle is. I have a 2007 and could only find a 2006 but when I tried it it didn’t work.
Try to buy from Ali Express and match the pins! I show and talk about it in the video. See around 6 minutes and 50 seconds
i really appreciated, about your effort to give us knowledge. i have same issue with pathfinder 2009 se model. will it fit for 2009? and any specific link for this product in alibaba? Thank you
Just look in the other comments, I put the part number that you have to search for in aliexpress website
Looking at your video is great but what happen to last wire with the white cap ? Did connect it or did leave alone?
Thanks for the comment! The extra wire is for the steering angle sensor, the models over here in the Gulf do not have this system.
Thanks 😊
Excelente 👌 👍
What is the correct part number for the clock spring on my 2007 Nissan Maxima 3.5?
Traction control light stays on after replacement all other lights off just the traction on any idea why?
On the clock spring I ordered only has one wire for the airbag. This one shows two have two. My Nissan is a 2009
Hello I did this job month ago and it was successful thanks to you ..thank you . but I couldn’t stop the airbag light gone . with you’re process .on the switch is there any different way to do it ??
Make sure the airbag connectors are properly connected. Other then that i am not sure if there is a separate reset for the airbag lite!
@@carapiet I do replace the air bag from jonkie part few months ago from another frontier maybe that’s way ..I can’t turn light off …other than that it’s working perfect 👍 thanks
Great video. Thx. I’m in Canada. I noticed one extra connector on the steering wheel. Would your part number work for me?
Check the pins on your part as explained in the video
Did you get this solved? I have VDC on my pathfinder and am looking for the correct part.
What happen to the steering angle sensor? Make sure the two prongs fit into the two slots. take off bottom of old clockspring and add to new with three screws.
I’m in the Middle East and the Pathfinders here don’t come with Steering Angle Sensors! However the wiring is there if anyone wants to add that on as a after sales add on! Cheers!
Could you provide a link for the clock spring please thank you
The video provides the repair is easy to follow instructions, but I do not recommend buying the part off of Ebay or Ali Baba. Since you are doing the repair yourself and the clock spring might have the ABS system tied in (his does not look like it has the angle sensor attached like mine did), buy an OEM part.
What is the purpose of the steering wheel angle sensor?
I see that it was left unplugged, by what I'd assume is someone who did the work previously. You can clearly see it was never "unplugged" in this video, and it's seen at 10:04; the other smaller white plug to the left of the plug that was just removed.
And then at 12:54, you see it was tucked away when the assembly was being re-installed.
@@dyip32 It's an annular piece that has the wiring that connects to all the commands on the steering wheel. Therefore, per se, it's not that important. It all depends what doesn't work in the steering wheel sensor. I have had the one in my Pathfinder 2010 model not functioning properly for several months, but the only issue is that the honk doesn't work. I did not replace it because the original part is crazy expensive and didn't have the time to look for the right part online. Thanks to this video I seem to have finally found it. If you want to save money, but be safe, you can buy the part online, but have your mechanic confirm it's the right part, and have him install it. That's what I plan to do.
What was the part number on that clockspring you ordered from Alibaba? I'm in the same situation you were with the airbag light blinking.
This is the part number on Aliexpress: 25560-R07AB 25560R07AB ZP51D-25560-R07AB For Nissan Free Shipping.
hope it helps
@@carapiet Thank you. Much appreciated.
Excellent. No B.S
I have the same vehicle but usa version and I noticed that your vehicle doesn't have a steering angle sensor I wonder why
My Pathfinder is a Middle Eastern SE model and didn’t come with the feature “steering angle sensor” in 2008! But it does have the wiring if I wanted to add on that as a after market feature.
If you don't have volume control on the left. Can you swap this out and put the control and it will work?
Yes, it’s the same part for all the controls on the steering wheel!
Will it work if I don't have controls on the left side. And I get the part for the left{volume control} and change it
I have watched this video several times and have tried to release the air bag without any luck .do you have any tips to try?
Try shining a torch in to the hole to see the rod that you need to push up to release the airbag and maybe use a wider screwdriver
@@carapiet thank you
I can’t seem to find the correct clock spring. They keep sending me ones with out steering wheel switches. Can you share with me how to get one
Are you asking about the wiper control and head light controls ?
Hello
Now after about 8 months let's know your feedback and experience?
Specially is there anything abnormal when you steer like any noise or something?
Still working perfectly. No issues!
@@carapiet cool
I am also in Doha, would you guide me for the tools used for the replacement and where to buy from please?
What if only my buttons aren't working but I have no airbag warning light? Is it still clock spring or something else?
Yes, so some of the wires in the clock spring have lost their contacts and those control buttons have stopped working! It is only time before the airbag probably will stop working too. You can wait a while if the control buttons that are not working are not that important to you
I have a 2008 V8 Pathfinder SE
Failed today to change mine ,the connection is mot exactly the same yours
With the 11pins i have two more connecter
Yes, you have to check the pins before buying the part! In the video I tell you to check the pins depending on your model before ordering
@@carapiet
i think the problem is heated steering wheel connection
10mm?
Very nice explainable video, but you didn't install the "steering wheel angle sensor" nor did you put the "white" wiring hornist at the left top into the steering wheel angle sensor, on the clock spring and without doing this, there will be a light on the dash board that will not go off !!
Yes the Nissans in the Middle East where I live don’t have that feature! But you are right I should have mentioned that in the video
Cheers!
I replaced clock spring and all my controls and horn work but now the vdc off light and the slip light won’t turn off on the dash
Did you check that the pins match like described in the video?
Hola amigo, a mí me pasó lo mismo, recuerde comprar la pieza que corresponde a su versión del vehículo, ya que hay una versión que no tiene el acople para el sensor de ángulo de dirección, el computador no reconoce el giro de la dirección y enciende esas luces, después de cambiarlo también es necesario programar el sensor
@@danielbequer1569 ¡estás en lo correcto! pero aquí en el Medio Oriente estos modelos no tienen esa ficción. salud
Air bag light comes on again after doing diagnostic. I have to replace my driver side airbag.
Did you see the end bit of the video for the system reset?
It may just be an issue with the sensor. It may not be necessary that you change the airbag. In both my cars, the dashboard shows an issue with the airbag. But that's a sensor fault, and the airbags are fine and would deploy as needed in case of accident. I recommend you check with your mechanic first, as long as it's a good one that you can trust.
Donde puedo conseguir esa pieza?
This is the part number on Aliexpress: 25560-R07AB 25560R07AB ZP51D-25560-R07AB For Nissan Free Shipping.
hope it helps
Where can you purchase the clock spring?
Hi read the previous comments and replies from me for the part number and where to get it cheap!
Cheers
We call it spiral cable
At 12:33 the white connector at the top left doesn't get connected to anything?
The Middle Eastern models do not have an angle sensor and those cables are not connected! Should have mentioned that in the video.
Cheers
@@carapiet Cheers. That right angle sensor is for VDC on the models that have it. Great video and thanks for making it!
You can take the old VDC sensor off the old clock spring and attach it to the new one or buy a new one.
what is the part number of the steering clock spring?
It is the comments before yours
@@carapiet thank you so much for the good video
will this part number will fit for Pathfinder 2011, the Nissan spare parts outlet gave me the part number 255609CH1A?
Is it normal that there is no Steering angle sensor
Yes this is a model here in the Middle East and they don’t have the Steering Angle Sensor
I just changed mine out and had to remove the old steering angle sensor, and put it on the new clock spring. Worked like a charm! Thanks for the info on the diagnostic mode to clear the airbag light! My $300 code reader wouldn’t clear the light, but after a few cycles of the ignition and a start… light went off!
Help, I did step by step but airbag keeps blinking
Watch end of the video to reset the electronics
Make sure that wires and connectors under your seats are all connect good and not frayed or pinched. I had such a problem with my passenger airbag and light kept flashing. Dealer want $2500 to replace entire seat. I discovered the cable/wire was pinch on the rail that the seat slides forward and back. Moved it and zip tied it away from the rail and blinking light went out and everything works perfectly.
What happens if you dont replace it?
Well first the volume control, then after some time the cruise control on the steering wheel stoped working and then after a few years even the horn stopped working.
@@carapiet yes but what happens if you don't replace the clockspring
The vehicle is still drivable, the steering wheel will still steer, however ultimately all the electrical switches including the airbag might stop working!
@@carapiet ok just replaced it for airbags safety reason part was more expensive than labor from my mechanic
This is the part number on Aliexpress: 25560-R07AB 25560R07AB ZP51D-25560-R07AB For Nissan Free Shipping.
hope it helps
I'm just starting to replace mine now. But how long did it take you to pop that airbag off? I can't seem to get it.
It took a few minutes! You just got to feel for the release bar with the screwdriver head and push it up ! Maybe use a larger screwdrivers!