How to Replace Blower Motor 2012-2017 Toyota Camry

Buy Now!
New HVAC Blower Motor Assembly from 1AAuto.com trq.video/id-1...
This video shows you how to install a new blower motor from TRQ on your 2012-2017 Toyota Camry. The blower motor, and typically integrated fan, is responsible for blowing the heated or cooled air from your heat or AC system into the cabin of your vehicle. A fan could become noisy if it is broken, or could stop spinning all together.
This repair was done on a 2014 Toyota Camry SE 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry
Tools you will need:
• Pocket Screwdriver
• 8mm Socket trq.video/obEZ...
• Ratchet trq.video/ob65...
• Socket Extensions trq.video/ob5j...
• Gloves trq.video/oaZ6...
• Safety Glasses
Subscribe: / @trq
Check out our playlist:
Toyota Camry 2012-2017 7th Generation: • Toyota Camry 2012-2017...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@nuthnlft2bleevin]

Thank you! 15 minutes. So easy.

[@1995texasaggie]

Kudos for this video. My experience was not as easy. Removing the cover panel = same as the video. Removing the blower motor = different. I had to use a right angle drill attachment and a torx T20 (star of david pattern) for the screw heads and a Makita TD020D impact driver to get into the compromised space. I used my iPhone's camera (reversed/selfie mode) to see what I was doing. Contortion for sure! My blower had torn material from a mouse in it so I didn't need to replace the blower motor....so I didn't even try to undo the power plug (super tight by the way). I contributed to my swear jar during the process but in the end I was successful and appreciated this video for guidance.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@roynunnally3698]

Thanks. These procedures worked on my 2015 Avalon. Suggest adding electric tape on the 3 screw holes and adding the screws half-way. That will save you time when remounting.

[@markg999]

Thanks..pretty much same for my Lexus ES 350, 20 min easy swap.
Mine was making some noise and was intermittent not blowing air...especially when car was parked after driving. So far a day later seems to have fixed issue.

[@linoxcarter5631]

Is it possible a fuse could be blown I replace my blower and it still doesn’t come on

[@whathappened2230]

Thanks for showing us this!

[@micayiah1]

That's easy enough.Thanks!

[@maxchavarria4911]

God bless

[@antwonnolan5455]

Awesome, thanks

[@heroknaderi]

Thanks . I’m also curious. Is this the same for the 2013 Avalon

[@Just_Giio]

Thank you.