Need to swap out the taillight bulbs for LEDs so they're instant on/off like the light bar. That would drive me absolutely crazy seeing the stock signals and brakes fade in and out while the light bar comes on and turns off instantly. Edit: This would be a must for me, even without the light bar!
Did you just wrap spliced wires on the under side of the truck with just electrical tape? No solder, connectors or heat shrink? Moisture problems ahead.
Received my light bar and wired it today. The lights are amazing [bright and crisp]. Get one, you'll love it. Save yourself some time and order a Curt #56584 harness and #58550 5 pin connector plug from Amazon. Just plug and play, no cutting into your trucks wiring. You will have to wire in the backup light, but this can be done on your work bench. Thanks Ryan. Also the light bar does NOT interfere with the lowering of the spare tire, you just have to modify the protective ring a bit.
Nelson Bardsley I’m trying to avoid all the splicing or whatever. I was going to order that harness with it, but it says it doesn’t fit my truck I have a 2014 ram 1500. Any recommendations??
Angel, There are so many variations of wiring harnesses and truck configurations. Get ahold of "curtmfg.com" and they will be able to help you. My truck is a 2017 model Ram.
Great info and a very helpful and respectable response there Nelson! The world needs more kind people like you in it! Drive safely and enjoy the holidays.
Thanks for the recommendation. I am surprised you got one with Amber flashers when your truck doesnt have amber flashers on the rear. I want to get one for my 98 K1500, which only has red on the rear, so I hope they have one with Stop/Running, Reverse, and Red Flash. Great video!
Hey man, just wanted to say thanks for this video. I bought my Putco 48" this week, it came in yesterday and I got it installed last night. Super awesome light and have gotten a lot of compliments on it. I'll post a video and give you a shout out. Thanks again!
Thx for the video. Anyway to show the back up camera while light is on? Or maybe quick answer on if it effects the camera with how bright the light is? Im worried it might effect the back up cameras picture at night. But either way great video, keep them coming. Thx
Looks like a sweet rear end upgrade. To avoid future problems, I would highly suggest (as others have, but i'm trying to add a helpful factor in and not just name call) you do a better splice in job. The elements will make it through your electrical tape and corrode those connections. Those scotch lock connectors (t-taps) are no good and have seen them fail many times as well. I mean your connections, as is now, may last a week, a year, or maybe 10 years, but I'm sure you don't want to have to worry about it at all. I would suggest cutting the wires apart where you spliced in and either soldering them and then covering them with heat shrink that has adhesive inside that will help seal it up, or use butt splice connectors that have heat shrink with adhesive on them. You can get ones that can accept 2 wire on one side and one wire on the other side (like a yellow butt on one side and blue on the other). To take that even further in to the professional installation side, you could make or purchase an 8" adaptor with the correct connectors and amount of wires and then splice in off of that and have a connector there and install a connector on the light bar wires. You could then remove the adaptor and light bar if you ever wanted and just plug the factory connectors back together. Obviously this is just my opinion and someone else might call me an idiot or maybe have something helpful to add, which i'm fine with learning, But this is what has worked for me to make good wiring connections and not have to worry about them. Cheers
I respect you actually commented on how I should do it to not worry! Lol I did it this way so if I wanted I could always remove it without cutting! I didn’t want to cut and solder the harness back together, I may solder the connections in the future but for now they’re gonna be like that for a while lololol
I haven't watched the whole video yet but doesn't somebody make some type of plug and play so you don't have to cut any wiring and in the future if you wanted to remove it you just plug the original back in???
Has he heard of the CURT 55384 Vehicle Side Custom USCAR Vehicle Trailer Wiring Harness for Towing, 4-Pin Trailer Wiring? I used it to install my OPT7 Triple LED Tailgate Bar with sequential turn signal, and the only splice I had to do was for the Reverse cable. The CURT harness took care of the rest. In my case the bar already came with the 4-Pin connector pre-installed and a single cable for the Reverse.
Don’t use any snap connectors, always use heat shrink connections. They’re weatherproof, and will not corrode if you do it properly do it. Splicing wires the way he did is sure to fail shortly.
Posi-tap or the supplied ones work with electrical tape. Haven't had any issues for 2 years. Glad i didnt aoldoer becausei sold the truck but wanted to keep the blade
My 50$ front ebay very bright led set-up has been goood for just over a year with no problems, still like new. Came with lights, wiring and switch for in cab. I dont think I'd get fancy ones and be spend 10x to 20x more for not much different. Cool look though!
I've two of these light bars on my 2015 ram 1500. Great looking and functional when they work. First one lasted 4 months the shop replaced it and now this isn't working. Shop says they've had several issues and on the phone with putco. They'll install another one but said it'll happen again
So while I'm only looking for a reverse light bar, holy crap $300 today on Amazon for this Blade.....still looking.......but a question for ya, I suppose your truck does not have "Trailer Light Out Sensing" because if it did, wouldn't the truck think a trailer is always connected? On my 19 Ford, when I plug in a trailer (essentially the same thing as you tapped into), the truck knows the trailer is connected. Just a thought....
I went a much different route, I mounted a 22 inch led light bar on my truck bed to deter tailgaters....12,400 lumens of light is extremely effective, most won't come near me just cause they see it pointing directly at them at night
You put so much into your Ram truck, now protect the center of rear wheel well openings from rusting. It's a very common problem for Ram Trucks. Light bar looks fantastic....
I have a tail gate light bar on my 2016 Silverado and I bought a harness adapter the goes in between the factory harness and the bumper plug and has a 4 pin connector on it. No need to splice factor wiring and I tapped into the center wire(reverse light on the adaptor
Bought one for $12 on eBay on accident. Been using it for 2 years and all the led's still work. Has full function also, hazard flash, left/right blinker, brake and reverse light. The mistake was worth it lol
Hey man, that is some bright lights, I have a RAM 1500 and I need to figure out how to rig up a movable light bar for retrieving a boat at NIGHT, there are NO lights at the ramp i am always at. I wanted to light up the whole area because it's a sailboat, not a motor boat it goes on differently and you have to see things! Is there any way to make up a connection for this situation?
I got one on my car silly I know But I do t have a daytime runner wired in (weird on a car) but the brake lights flash 2 times before staying solid and the turn signal goes from one side to the other sorta like an Audi signal. Cheap and easy mod!
Did you check that you can get the spare tire crank bar extenders into the hole you just covered up with the light bar? You're going to bust the thing cranking down the spare.
A t-connector will plug straight into the truck wiring harness and works great for the 4 pin, then it's just a matter of connecting the back up wire ... I like the self stripping tap connectors. Great vid .... lights look awesome.
Ryan going back to an old video for some help I like how you set this light up but I wanna run flush mount leds in my bumber could I hook them up like this for reverse and then have it on a switch were I could turn them on when ever
I would recommend removing the tailgate to install much easier. Also, it looks like you installed the lightbar right over the spare tire removal opening? How will you drop the spare?
Hey bro why just not connect it directly into the 4 pin connector is there a difference other than making look much cleaner without the wires being visible ?
I'm not liking how half the bar lights up for turn signals, imo, just a single outer light or sequential from center out and then the factory light to come on during last sequential blink. Does someone make that kind of module to do that...
If u splice that way you should use a punch to separate the wire core to make 2 half's then stick your wire in the middle then twist now it will not just unravel and u get a more secure connection
I like the look I just wonder why they made the light with amber turn signals? Being in the rear it’s always red. That’s the only thing that stands out to be a bit odd. Definitely bright and visible though.
Never really liked the O'Reillys/autozone ones but i didn't know something of this quality existed. Looks really good and clean. All you need now is some LED tails to match.
I just got on of these lights for my 2016 Silverado. It has a trailer detection and I’ve been reading things about people having issues with the trailer detection going crazy after installs. I haven’t started my install just yet due to bad weather. The directions that come with it aren’t the most descriptive instructions. Have you had any issues with this?
I want to get one and put it under the tailgate but inside the flap so you don’t see the light bar directly, but you still see the light. So I’d be installing it across and above from where you did if that makes sense
I wonder if light goes on tail gate why not take tail gate off to make install easier? if it goes on end of bed still remove TG for easier installation. just wondering
A plug in t connector or shrink butt connectors and should be using a 5 flat connector like what is used on a boat trailer with electric brakes so you have the 5 th wire for reverse lights
I have a 2016 ram 1500 and my tailgate bar has a separate brake wire……where can I tie that into……it doesn’t work properly if I tie into the tail light wire…… any advice?
Ryan I live in Texas and was pulled over for using my LED light bar and it was foggy asf And the SOB gave me a ticket stating that it was illegal to use on the highways or streets! Your thoughts
Great video and info...you have any insight as to how I can install this light bar on a 2004 Suburban? The rear of these suburbans aren't straight across fully. Any help?
Of your doing this they make a T connector that plugs into the back of your 7 pin plug and gives you the wires you need so your not splicing. It a much cleaner install and much more reliable.
Hey great video as all r question r u from New York or ever lived there n worked for Westchester county prc.for some reason I thought I used to work with u 15 20 yrs ago if so please let me know thanks
our car doesnt have the 4 pin flat socket. i plan to hard wire the product. the supply wires are as follows 1. Ground 2. Running light 3. Brake 4. Left turn 5. Right Turn 6. Reverse the product i bought has 5 terminals / wires ; 3 colors - red, amber, and white 1. Ground 2. Running light (red low beam) 3. Left turn 4. Right Turn 5. Reverse i do not know where to connect the brake supply wire from the car to produce the high red beam
So just out of curiosity, why didnt you go with the OPT7 quad row sequential signal bar? They're more affordable ($89 vs. $160) and in my opinion, sequential signals look better.
Nice truck man, and that light bar looks super clean!! Where did you get the light bulbs for the license plate area? And not sure what they are called. Lol!
That was a good video I never realized you could put a light bar in there. I'm going to try to look for more videos of your truck because I like that color I want to see what the rest of it looks like I actually painted a old school Craftsman tool box the same exact color came out cherry and nobody else's got anything like it
Does this mount cover up the spare tire release hole? And are you able to drop the spare tire with this on? I’ve heard of some people having to remove the plastic hole cover so the bar mounts flat, how was it in that area?
This light bar can be removed from the mounting brackets to get to the spare tire and the brackets stay on your truck! And it pops back in! I removed that part from editing made the video wayyyy to long and I can even use the 31” spare anymore 😂😂! But amazing design!!
if u use the plastic brackets it will give it the same space as the plastic spare hole the light will even shit on the plastic hole but the plastic brackets do break easy so be carful i broke the tabs on mine and just took them off and put 3m on the light its self and took off the plastic spare hole
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
Damn! I spent $20.00 on a light strip on Amazon and couldn’t be happier. You’re a better man than me coughing up 10Xs the price on yours.
Naah you're just cheap.
Need to swap out the taillight bulbs for LEDs so they're instant on/off like the light bar. That would drive me absolutely crazy seeing the stock signals and brakes fade in and out while the light bar comes on and turns off instantly.
Edit: This would be a must for me, even without the light bar!
I love seeing this build come along, it's so satisfying.
Me too 😍
I love my Putco Blade...i've had 3 since Christmas 2018. Thank God for the warranty.
Did you just wrap spliced wires on the under side of the truck with just electrical tape? No solder, connectors or heat shrink?
Moisture problems ahead.
Received my light bar and wired it today. The lights are amazing [bright and crisp]. Get one, you'll love it. Save yourself some time and order a Curt #56584 harness and #58550 5 pin connector plug from Amazon. Just plug and play, no cutting into your trucks wiring. You will have to wire in the backup light, but this can be done on your work bench. Thanks Ryan. Also the light bar does NOT interfere with the lowering of the spare tire, you just have to modify the protective ring a bit.
Nelson Bardsley I’m trying to avoid all the splicing or whatever. I was going to order that harness with it, but it says it doesn’t fit my truck I have a 2014 ram 1500. Any recommendations??
Angel, There are so many variations of wiring harnesses and truck configurations. Get ahold of "curtmfg.com" and they will be able to help you. My truck is a 2017 model Ram.
Great info and a very helpful and respectable response there Nelson! The world needs more kind people like you in it! Drive safely and enjoy the holidays.
@@nelsonbardsley3535 Be honest man are you getting paid by them to say this or no? I have a 2006 5.9 Cummins do you think itll work?
@@steve5912 Sorry, not getting paid, just love the product and install was easy. It should fit almost any pickup.
....spends $200 on a tailgate lightbar - okay fine.... doesn't spend $12 on a soldering iron to make good connections - not so cool....
WORD!!!
He’s a newb, give him a break
Cringy eh
No go have to save my money for crack
The tape probably fell off before he was done with the video.....
Thanks for the recommendation. I am surprised you got one with Amber flashers when your truck doesnt have amber flashers on the rear. I want to get one for my 98 K1500, which only has red on the rear, so I hope they have one with Stop/Running, Reverse, and Red Flash.
Great video!
Hey man, just wanted to say thanks for this video. I bought my Putco 48" this week, it came in yesterday and I got it installed last night. Super awesome light and have gotten a lot of compliments on it. I'll post a video and give you a shout out. Thanks again!
Thx for the video. Anyway to show the back up camera while light is on? Or maybe quick answer on if it effects the camera with how bright the light is? Im worried it might effect the back up cameras picture at night. But either way great video, keep them coming. Thx
Looks like a sweet rear end upgrade. To avoid future problems, I would highly suggest (as others have, but i'm trying to add a helpful factor in and not just name call) you do a better splice in job. The elements will make it through your electrical tape and corrode those connections. Those scotch lock connectors (t-taps) are no good and have seen them fail many times as well. I mean your connections, as is now, may last a week, a year, or maybe 10 years, but I'm sure you don't want to have to worry about it at all. I would suggest cutting the wires apart where you spliced in and either soldering them and then covering them with heat shrink that has adhesive inside that will help seal it up, or use butt splice connectors that have heat shrink with adhesive on them. You can get ones that can accept 2 wire on one side and one wire on the other side (like a yellow butt on one side and blue on the other). To take that even further in to the professional installation side, you could make or purchase an 8" adaptor with the correct connectors and amount of wires and then splice in off of that and have a connector there and install a connector on the light bar wires. You could then remove the adaptor and light bar if you ever wanted and just plug the factory connectors back together. Obviously this is just my opinion and someone else might call me an idiot or maybe have something helpful to add, which i'm fine with learning, But this is what has worked for me to make good wiring connections and not have to worry about them. Cheers
I respect you actually commented on how I should do it to not worry! Lol I did it this way so if I wanted I could always remove it without cutting! I didn’t want to cut and solder the harness back together, I may solder the connections in the future but for now they’re gonna be like that for a while lololol
Bradley is right, do it right the first time. I lmfao when I saw you twist splice and tape the joints.
I haven't watched the whole video yet but doesn't somebody make some type of plug and play so you don't have to cut any wiring and in the future if you wanted to remove it you just plug the original back in???
Has he heard of the CURT 55384 Vehicle Side Custom USCAR Vehicle Trailer Wiring Harness for Towing, 4-Pin Trailer Wiring? I used it to install my OPT7 Triple LED Tailgate Bar with sequential turn signal, and the only splice I had to do was for the Reverse cable. The CURT harness took care of the rest. In my case the bar already came with the 4-Pin connector pre-installed and a single cable for the Reverse.
That's install is major clean. Nice truck.
New drinking game.... every time he says “here” drink. 😂
Too duckin frunk ta continue playin......grate
Don’t use any snap connectors, always use heat shrink connections. They’re weatherproof, and will not corrode if you do it properly do it. Splicing wires the way he did is sure to fail shortly.
Yup. If you’ve seen his more recent videos it’s already failed
Posi-tap or the supplied ones work with electrical tape. Haven't had any issues for 2 years. Glad i didnt aoldoer becausei sold the truck but wanted to keep the blade
Oh snap I need this!!! Subscribed great video I just got a ram 1500 ready to mod it up
Every 16 year old kid and/or Mexican loves this mod.
My 50$ front ebay very bright led set-up has been goood for just over a year with no problems, still like new. Came with lights, wiring and switch for in cab. I dont think I'd get fancy ones and be spend 10x to 20x more for not much different. Cool look though!
I've two of these light bars on my 2015 ram 1500. Great looking and functional when they work. First one lasted 4 months the shop replaced it and now this isn't working. Shop says they've had several issues and on the phone with putco. They'll install another one but said it'll happen again
How's is Putco Blade holding up? Getting mix reviews as far lasting long!
That one is pretty sweet. I have the Opt-7 tailgate light bar and it’s pretty legit too. The yellow blinker light has a chasing sequential effect.
Godamn the edits on this video!
I REALLY like the Reverse and Hazard light function and appearance. Thank for this information and post....
So while I'm only looking for a reverse light bar, holy crap $300 today on Amazon for this Blade.....still looking.......but a question for ya, I suppose your truck does not have "Trailer Light Out Sensing" because if it did, wouldn't the truck think a trailer is always connected?
On my 19 Ford, when I plug in a trailer (essentially the same thing as you tapped into), the truck knows the trailer is connected. Just a thought....
less talk more action
A ha ha ha ha!!!!! The light looks awesome!!!
I went a much different route, I mounted a 22 inch led light bar on my truck bed to deter tailgaters....12,400 lumens of light is extremely effective, most won't come near me just cause they see it pointing directly at them at night
You put so much into your Ram truck, now protect the center of rear wheel well openings from rusting. It's a very common problem for Ram Trucks. Light bar looks fantastic....
Dude, sick color on your truck
I have a tail gate light bar on my 2016 Silverado and I bought a harness adapter the goes in between the factory harness and the bumper plug and has a 4 pin connector on it. No need to splice factor wiring and I tapped into the center wire(reverse light on the adaptor
Bought one for $12 on eBay on accident. Been using it for 2 years and all the led's still work. Has full function also, hazard flash, left/right blinker, brake and reverse light.
The mistake was worth it lol
You didn't get a Putco Blade for twelve bucks.
Hey man, that is some bright lights, I have a RAM 1500 and I need to figure out how to rig up a movable light bar for retrieving a boat at NIGHT, there are NO lights at the ramp i am always at. I wanted to light up the whole area because it's a sailboat, not a motor boat it goes on differently and you have to see things! Is there any way to make up a connection for this situation?
The adhesion promoter isn't for the paint side it's for the light bar side when you stick the tape too
I got one on my car silly I know But I do t have a daytime runner wired in (weird on a car) but the brake lights flash 2 times before staying solid and the turn signal goes from one side to the other sorta like an Audi signal. Cheap and easy mod!
I have a 21 rebel, with this setup can I still plug my boat trailer in with no problems?? Thanks great vid
How did you tap into the reverse light? Did you pill the rear light out ? And what wire? Thanks.
how is it holding up $250 is a lil steep
Did you check that you can get the spare tire crank bar extenders into the hole you just covered up with the light bar? You're going to bust the thing cranking down the spare.
NICE !!!!! & Y’all think I’ll be okay if I get a front light bar ? How illegal is it ? Or should I just not care
A t-connector will plug straight into the truck wiring harness and works great for the 4 pin, then it's just a matter of connecting the back up wire ... I like the self stripping tap connectors.
Great vid .... lights look awesome.
Alot better that ehat he did..wrapping the wire than taping it. Better off using the supplied ones he had
Highly doubt you’ll see this question lol but worth a shot did the reverse light give you more light visibility while you reverse.?
Holy crap show the install already ! Waited too long I’m out.
Ok matthew? Lol gtfo already
Is the light bar too bright for the backup camera? Would be nice to see what the dash screen looks like when in reverse.
This is fukn GREAT! Now i know exactly what I'm installing on my truck instead of the hitch lights. Thanks for the vid and that's an awesome truck.
Nice light. But damn, was your truck stuck between the garage door opening? That there are some tight spot...lol
Great job. I like to add it to my 2022 Ram Rebel. 🇺🇲🤙🏻
Did u take off the plastic part that goes around the hole to take your spare tire out?
I love that tailgate light bar. You're whole truck is awesome and yes that tailgate light bar is really bright. Awesome job.
Ryan going back to an old video for some help I like how you set this light up but I wanna run flush mount leds in my bumber could I hook them up like this for reverse and then have it on a switch were I could turn them on when ever
I would recommend removing the tailgate to install much easier. Also, it looks like you installed the lightbar right over the spare tire removal opening? How will you drop the spare?
HPIII looking for that option is the only reason I watched this ( I also have a ram ). Then he went right over top of it🤦🏻♂️
@@UpStuff This is also the only reason I watched this video. I wan't one for my 2014 Ram 2500, but I also want to be able to lower my spare tire,
A Curt-T connector would’ve been cleaner to use in my opinion instead of splicing. Either way great vid!
They will turn green and corrode almost instantly.
Or a wago
You are truly amazing and I enjoy all the videos !!!
What's the model number of the putco blade tail gate lights. There are too many versions. Great video guidance. Thanks
Beautiful light bar definitely worth the money
That is sick!! Im most def getting that for my baby diesel.
Hey bro why just not connect it directly into the 4 pin connector is there a difference other than making look much cleaner without the wires being visible ?
I have the same light bar. Love how bright it is. Keep the vids coming.
I'm not liking how half the bar lights up for turn signals, imo, just a single outer light or sequential from center out and then the factory light to come on during last sequential blink.
Does someone make that kind of module to do that...
Gary DP Dude. I was thinking the same thing.
If u splice that way you should use a punch to separate the wire core to make 2 half's then stick your wire in the middle then twist now it will not just unravel and u get a more secure connection
Looks good only reason I care for them cause of the blinker I can't stand that the light bar is a blinker (IMO) looks tacky
Sequential > blinking
You can leave off the left/right blinkers, and utilize the tail light portion of the 7 pin trailer adapter and have running, brake, and reverse only.
I like the look I just wonder why they made the light with amber turn signals? Being in the rear it’s always red. That’s the only thing that stands out to be a bit odd. Definitely bright and visible though.
Never really liked the O'Reillys/autozone ones but i didn't know something of this quality existed. Looks really good and clean. All you need now is some LED tails to match.
Working on that very soon 😏
Thos was great. I'm confident I can do it. Keep this videos coming, thank you.
I just got on of these lights for my 2016 Silverado. It has a trailer detection and I’ve been reading things about people having issues with the trailer detection going crazy after installs. I haven’t started my install just yet due to bad weather. The directions that come with it aren’t the most descriptive instructions. Have you had any issues with this?
@ryanmayer have you gotten stop by a cop cause of the brightness
Damn that Is a huge ghost trailer you were pulling does that affect your mileage?
What brand is that ? Thats pretty bad a**
I like the amber turn lights! Pretty cool man !
Looks great. Only one thing. Won't you think it would it be easier if you it take the tailgate off so its easier to work in the area
It would be easier but I have a tailgate assist on my truck and didn’t want to remove the shock lol otherwise I woulda!!
I have same bar and love it when it works. Everything is wired and correct but occasionally the reverse light doesnt work
I want to get one and put it under the tailgate but inside the flap so you don’t see the light bar directly, but you still see the light. So I’d be installing it across and above from where you did if that makes sense
Lmfao look at how clean the underside of that truck is. Why buy 'mud' tires if you never use them? Four wheeling in the garage 😂😂😂
Can we get just a few more jump edits! Don't think you had enough in the 1st 2 minutes alone! LOL Love the vid all kidding aside
I wonder if light goes on tail gate why not take tail gate off to make install easier? if it goes on end of bed still remove TG for easier installation.
just wondering
A plug in t connector or shrink butt connectors and should be using a 5 flat connector like what is used on a boat trailer with electric brakes so you have the 5 th wire for reverse lights
I have a 2016 ram 1500 and my tailgate bar has a separate brake wire……where can I tie that into……it doesn’t work properly if I tie into the tail light wire…… any advice?
Ryan I live in Texas and was pulled over for using my LED light bar and it was foggy asf And the SOB gave me a ticket stating that it was illegal to use on the highways or streets! Your thoughts
Block the spare tire crank lowering access hole 👍
Great video and info...you have any insight as to how I can install this light bar on a 2004 Suburban? The rear of these suburbans aren't straight across fully. Any help?
Super cool that it has feature for reverse
Of your doing this they make a T connector that plugs into the back of your 7 pin plug and gives you the wires you need so your not splicing. It a much cleaner install and much more reliable.
so you covered the hole that accepts the spare tire crank???
Hey great video as all r question r u from New York or ever lived there n worked for Westchester county prc.for some reason I thought I used to work with u 15 20 yrs ago if so please let me know thanks
our car doesnt have the 4 pin flat socket. i plan to hard wire the product.
the supply wires are as follows
1. Ground
2. Running light
3. Brake
4. Left turn
5. Right Turn
6. Reverse
the product i bought has 5 terminals / wires ; 3 colors - red, amber, and white
1. Ground
2. Running light
(red low beam)
3. Left turn
4. Right Turn
5. Reverse
i do not know where to connect the brake supply wire from the car to produce the high red beam
So just out of curiosity, why didnt you go with the OPT7 quad row sequential signal bar? They're more affordable ($89 vs. $160) and in my opinion, sequential signals look better.
@Ryan Mayer
I love the bar I just hate that the turn signal is yellow do they make all red ?
Nice truck man, and that light bar looks super clean!! Where did you get the light bulbs for the license plate area? And not sure what they are called. Lol!
Did you just cover up the spare tire release mechanism ? what the hell you going to do if you get a flat ?
Remove the dealership license plate frame.
I think they give him inscentive(royalties) for keeping it on to advertise. Could be wrong.
Dealer pays 10 dollars a month here to drive around with it.
Could be paying for him to drive that hideous green truck.
All license plate frames look bad.
Keep all the videos coming
Did you just use tape for the connection? No soldering?
Im thinking of buying a Toyota Tacoma to get around im not comfortable in big trucks do you think a tacoma will be a good starter?
Go Big or Go Home.
How well does this stick on for going off road? Should your reinforce the mounts? Thanks
Everyrhing is great but yes but how to install if you dont have a tow hitch wiring harness???? Can it still be done if so i am in
That was a good video I never realized you could put a light bar in there. I'm going to try to look for more videos of your truck because I like that color I want to see what the rest of it looks like I actually painted a old school Craftsman tool box the same exact color came out cherry and nobody else's got anything like it
OPT 7 60" light bar amazon plug n play , put one on my 2014 GMC Sierra , less than $200
I wish the flash for signal was red color to match the oem tail lights.
How are you going to access the hoist mechanism for the spare? The light bar covers the hole.
Thats sick bro. Great 👍🏾 install video.
after you tap into the trailer harness, for your reverse, is that in the trailer harness as well?
Just saw on your IG story you were going to upload. Love watching your build. 💚 #NotifciationSquad !!! :)
Seems like someone is having to result to picking up a guy from a you tube truck video?? Ehh..... first red flag.....
Does this mount cover up the spare tire release hole? And are you able to drop the spare tire with this on? I’ve heard of some people having to remove the plastic hole cover so the bar mounts flat, how was it in that area?
This light bar can be removed from the mounting brackets to get to the spare tire and the brackets stay on your truck! And it pops back in! I removed that part from editing made the video wayyyy to long and I can even use the 31” spare anymore 😂😂! But amazing design!!
if u use the plastic brackets it will give it the same space as the plastic spare hole the light will even shit on the plastic hole but the plastic brackets do break easy so be carful i broke the tabs on mine and just took them off and put 3m on the light its self and took off the plastic spare hole
Bro dont tell me to watch something like 8 times, I'm looking at my phone what do you think im gonna do look away?