Hi... I have seen some people are using outer area of base glass to stick side glasses same as like in this video. But some others are putting all side glasses on the top of base glass by reducing the 2 side glasses width by glass thickness.. Which practice is right or which practice is good ? And why ? Can any one answer on this ? Thank you...
Will silicone still bind after it skins over? I just replaced a glass panel on my aquarium and I had a hard time working the silicone out of the caulk. It may have dried a little before I placed the glass to bind
What's that thing you have on your index finger? Is it made of rubber? Looks like the silicone doesn't stick to it? Would be great if you could advise where to get them. Also I assume you don't need to clamp the aquarium? The silicone will bond strongly with the glass once it cures? Cheers!
It’s a good tank but I don’t recommend keeping those fish in there, I’d also put some water conditioner in the water otherwise you’re burning their gills which will cause them to die in 24 hours or less. Also, it doesn’t say how many gallons this tank can hold. Can you please tell me?
Teknik perakitan alas nya benar. Jadi sisi sisi tidak menginjak alas. Sehingga alas aman dari beban. Kebanyakan kita ini menjadikan alas sebagai tumpuan untuk sisi seluruh sisi. Sehingga saat tank diletakkan pada lantai yang tidak rata, maka lantai mudah sekali pecah.
A gentle reminder to anyone thinking of starting fish keeping: you must cycle your aquarium first! Also, goldfish need much bigger tanks than that. Nice job building it, but it should have a filter.
I don't think beginners start off by building their own tanks. Most start of with pre built kits. If they still enjoy their hobby after a while then they may look into stuff like this
The actually tank build isn't all that bad.... until you put that nasty cheap "decoration" down the corners and that god awful lid!! The foam bottom i can understand the requirement, but it could have been cut a lot neater, or used a better material...
i think you have to cycle the tank remove chlorine from there otherwise directly using tap water without cholirination the gils of fishes were burn and they will die within 24 hiur
I put your video on. Started working on an unrelated project. And then 5 minutes later of jamming out to your amazing music choice. I had completely forgotten about the work you were doing. I was astonished. Also thanks for the diy video
man!! I know the purpose of this video was for building fish tank, but you should have ended it up right there. Putting fish in that tank without cycling the tank+ no filter, no water conditioner and quick acclaimation made me wondering for how long these fish can survive?????
Bro there is no need to add contioners bcz i also dont add conditioners in my tank i have just added natural bacteria which cycles new tank in one day i weekly change 20% water and i dont add conditiones bcz my bacteria is there to purify my tank and also my gish are healthy
@@sohaibkhan9568 Conditioner Is used to remove chlorine from water, bacteria can't remove chlorine. The bacteria's only convert the ammonia in your fish tank to nitrates
Best and easiest way to make a fish tank on TH-cam....
Thank you.
If there wasnt any of that blue stuff and he had put some plants in, it would have been a nice tank
Hi... I have seen some people are using outer area of base glass to stick side glasses same as like in this video. But some others are putting all side glasses on the top of base glass by reducing the 2 side glasses width by glass thickness..
Which practice is right or which practice is good ? And why ?
Can any one answer on this ?
Thank you...
for larger aquarium outer area of base is good
Very useful video.
Please tell me side glasses are to be put on base glass or beside base glass
Do the sides sit on top of the base or are the sides put on the sides of the base?
Top of base (after 4 years XD )
Size for the middle 2 glass is wrong.. if it’s 12” * 12” the other side glass will not fix.. it should be 12”-5mm * 12-10mm if it’s 5 mm glass
Stanny Ruzario front and back glass using in outer area.. Overthinking sucks
Thats wat.. Its really wrong..
Yes u right.. the hight will not compltly same on the other side
@@lifeissosimplendeasy3859 chutiya he is right. Not using your brain sucks
the thickness of side glass / back and front glass has not be accounted for. which should be subtracted to keep the joints at exactly 90 degree angle
A detailed materials list on your projects would be helpful for the less knowledgeable.
True, i am wondering though how he manages to have the 1st side up with fresh silicone, like how do i keep it up
Channel PIECE OF PAPER, the best channel in making aquariums
Helping video.. That blue edges weren’t mandatory..
Which silicon are you using? Thanks.
Will silicone still bind after it skins over? I just replaced a glass panel on my aquarium and I had a hard time working the silicone out of the caulk. It may have dried a little before I placed the glass to bind
Try DowSil 881 for silicone, probbably the best one on the market for glass and aquarium builds.
How many glue bottles you used?
Don’t you need to clamp it as silicon cures? Awesome!
What's that thing you have on your index finger? Is it made of rubber? Looks like the silicone doesn't stick to it? Would be great if you could advise where to get them. Also I assume you don't need to clamp the aquarium? The silicone will bond strongly with the glass once it cures? Cheers!
Can you answer my questions?
Great work... Which adhesive you are using
Nice build. I like the detail.
Did you use wackeres 121 silicon. Is this silicon good for big aquarium aa compared to dow sil 100℅ silicon
What Brand of silicone did you use?
Bro what paste are u using to stick and fit the glass stronger ?? Please reply me bro
haddin bakks
This is silicon tube(clear)
U can easily get it from market.
Fevistick
I want to know do i get the edges sanded or do i leave the rough cut for joing with silicone
th-cam.com/video/LX5M33rAvKE/w-d-xo.html
how do you keep the 1st side up with non dried silicone?
Magic and mirrors, do not copy this work, it is not safe.
Pl sir suggest me I do 1.5(45cm)fish tank .size of glass & which mm glass use.pl.reply
What is the name of bule thing which used in aquarium corners and how to get it plz rply
Any answer plz
Tum bahut acha kaam krta hai maqsood bhai
Please mention the name of the materials..
Can i use this type of silicone for making plastic molder ?
Sir, plz tell the name of cilicon gum to use better finishing and best result🙏,
Very fine let me where to get the closure of fish tank & what is the name of glass glue & n blue plastic for corners?
13:25 can anyone tell me what is the name of that color blue thing? Thanksssss
Sangat rapih....Joss lah
Wrong process for making an aquarium.... Aquarium's all 4 side glass should stand on bottom glass..
Exactly! I noticed that straight away. Dude shouldn't be misleading others like this... Bad things will happen
No reason why they should. What is totall y wrong is the method of applying solicone
*If silicone is strong that's not a matter*
That's what I thought..
Method is correct. Silicon should be strong. Even ADA tanks come with all top glass connected from side of bottom glass.
Great video , but realistically basic tanks are VERY cheap to buy anyway .
It’s a good tank but I don’t recommend keeping those fish in there, I’d also put some water conditioner in the water otherwise you’re burning their gills which will cause them to die in 24 hours or less. Also, it doesn’t say how many gallons this tank can hold. Can you please tell me?
Congrats my friend ! From Brazil
Please can you tell me which glue is used to paste it
Is that a cundom on your finger
Yes you want I supply them
Teknik perakitan alas nya benar. Jadi sisi sisi tidak menginjak alas. Sehingga alas aman dari beban. Kebanyakan kita ini menjadikan alas sebagai tumpuan untuk sisi seluruh sisi. Sehingga saat tank diletakkan pada lantai yang tidak rata, maka lantai mudah sekali pecah.
I hope that fish will be okay by now ! that was fish assalut!
I like u r job good videos
What is the width and height of an aquarium of 4 feet long? I would be very benefited if you help sir!
Keep it 2.5 ft or 3 ft width and height of 2 ft
Total cost of the setup,
Bro u r awesome bot videos dekhi but u r awesome
Where you bought the glasses??
A gentle reminder to anyone thinking of starting fish keeping: you must cycle your aquarium first! Also, goldfish need much bigger tanks than that. Nice job building it, but it should have a filter.
I don't think beginners start off by building their own tanks. Most start of with pre built kits. If they still enjoy their hobby after a while then they may look into stuff like this
If any leakage occur after the process what we want to do??
Can u say the gum's name u using
Aquarium bana raheho aur music bomb banane jaisa diya hai 😁😁😁
The actually tank build isn't all that bad.... until you put that nasty cheap "decoration" down the corners and that god awful lid!! The foam bottom i can understand the requirement, but it could have been cut a lot neater, or used a better material...
I watched the whole thing and learned, but the music became so annoying I had to mute it.
Trexx G
How about the 10 minutes of adhesive tape stunts?? LOL
Haha🤢🤣
Can we apply thick or thin silicon lyer
Yes
Is this silicon work on acrylic sheet also or not?
What's the name of that edge frame?
Lovely jobly 🤙🏿🤙🏿🤙🏿👊🏿👊🏿👊🏿
Which glue you used please tell me
great video! like following the channel
Is it possible to make with 3mm glass?
Ur aquarium excellent work great job
Which glue used in it?
Beautiful aquarium and beautiful fishes
Where to find the side 4 bidding and top cover ???
What kind of silicone are you using and what’s the name of that blue brace?
100% silicone
Hello sir can we use the regular glue gun for this reply must plz
No you fucking idiot
@@criskringle5227 😂😂😂
Maryam Hisham wallpaper paste works well
This build is wrong! All four sides should be glued onto the bottom.
What's the blue support thing at 13:20?
Super.. 👍👍👍
Sir yeh corner gurde kaha milega
Por qué complican todo con pulgadas??? No sería más fácil hacerlo como la gente normal en cm?
glu ka kya nam h
Silicon
Which is the best
What is that the blue thing
No pump and filter
Goooood💯💯💯💯💯
How u make topcover
Will 6mm afford 100L X 50W X 30cm H capacity water pressure ??
From Indonesia : Thanks Brother
Sir ji apne konsa white glue lagaya hai glass ko
How silicon fix those glass so fast and how you make hole aquarium single handedly without any help
how did you do that aquarium cap
Buy cap from shop
Thank you so much it was really helpful 😊
sir,which is the best budget friendly glass to make aquarium
Where to buy that corner strips in chennai bro. And cost of that
It's cute but what no filtration the only thing you're gonna have there is a cloudy Box.
Pleas put the correct size of aquarium
Plastik ki. एग्सल kon c shop m milti hhe
i think you have to cycle the tank remove chlorine from there otherwise directly using tap water without cholirination the gils of fishes were burn and they will die within 24 hiur
is glue ka name kya h
What is the name of that glue?
Silicon
I put your video on. Started working on an unrelated project. And then 5 minutes later of jamming out to your amazing music choice. I had completely forgotten about the work you were doing. I was astonished. Also thanks for the diy video
Any alternative of silicon that can be to make fish tank because I am not able to find silicon nearby me , thank you
Maine 2/3 aquarium self me banaya hai but neeche me 5 6 point par leak कर raha hai I see Kaise thik kare
Melhor vídeo ❤
a very neat and tidy method
I don't get what the blue plastic is for?
Miffy moomoo. decoration basically
Kaiya's crazy Zoo ok cool so.i don't have to use it. Thanks for replying. Where do u get your glass from?
Miffy moomoo can’t remember sorry
Miffy moomoo I think amazon? Maybe Lowe’s or Home Depot, my dad bought it
And where can i find them...?
Bro ise dry kab tak karna hai
Super.thank you
Thank you so much
Very standard and useful for everyone.
how much time for drying
man!! I know the purpose of this video was for building fish tank, but you should have ended it up right there. Putting fish in that tank without cycling the tank+ no filter, no water conditioner and quick acclaimation made me wondering for how long these fish can survive?????
Bro there is no need to add contioners bcz i also dont add conditioners in my tank i have just added natural bacteria which cycles new tank in one day i weekly change 20% water and i dont add conditiones bcz my bacteria is there to purify my tank and also my gish are healthy
@@sohaibkhan9568 Conditioner Is used to remove chlorine from water, bacteria can't remove chlorine. The bacteria's only convert the ammonia in your fish tank to nitrates
Unless you have rainwater to put in, which I do
@@atul9407 also it helps to protects the slim coat of the fish
yeah what glue do you use?
Silicon sealant is the glue