To my delight on 32 degree night 40 degree day, turning off the isolation switch then back on worked, thankyou so much Jonathan and may the Lord Jesus Bless You in Everyway 😊
When you say PRESS CANCEL then “KEEP pressing” do you mean keep yr finger holding the down position or multiple presses? I’ve tried both. Holding the cancel switch no error code appears. When I hit cancel continuously every error code appears one after the next. What should I do? Thank you I did do the reset and this worked.
I don’t seem to find any error code it only beeps long with the 00 and it only turns on and opens in the heating mode but doesn’t even blow any air. Do you guys maybe think this is a small bug or a major problem?
If the long beep occurs while '00' is displayed on the screen it means the system has not yet registered a fault. '00' in the fault menu indicates the fault status as normal. This doesn't mean there is not an issue with the machine, because if its not working then clearly there is. The system may be low on refrigerant or a fault that is not yet severe enough to register on the control board. We would suggest having the system checked by a qualified cert 3 refrigeration technician. Feel free to contact our office with any further questions on (02) 6297 4109 or alternatively please keep us posted and let us know how you go.
@@mmmj1990s I have the same issue . Runs on cooling but won’t run on heating . Just runs the fan at a really low speed . Outdoor unit seems to be running fine . Did you find out what your issue was ?
Hi Tracy. Sorry for the delay in our response. Assuming you have tried to switch the power off for 30 seconds and back on again? If it is still showing an orange blinking light and the indoor unit, if you have a recent model with WLAN compatibility, the Orange flashing light can indicate it is not connected to the wireless network. This does not explain why you can't get the controller to beep when you hold the cancel button for 5 seconds. It is possible that the system has a faulty PCB or other component. Can you please confirm what the exact model number is and we will research this further for you? Thanks
Hi radiologi haji. Please confirm the model of your system and which light is blinking Red? Also please confirm you have also switched off the power for 30 seconds and then back on again?
Title says RED light but the video covers green light flashing. My problem is No green light but the RED light stays on all the time, which I think is stand-by. Any ideas?
If there is a double beep when a U appears, it means the "System" is in fault and not specifically the indoor or the outdoor unit. Normally when you continue through the error codes, the long beep confirms the second number is correct. I would suggest trying the alternate method of checking the error codes but you will likely get the same result. 1. Press the following 3 buttons simultaneously - Temp Up, Temp Down, Mode. 00 appears and the first digit willl blink. 2. Push the temp up arrow until you hear 2 short beeps. 3. Push the mode button and the second number will blink. 4. Push the up arrow until you hear a long Beep. If this still doesn't work and your system can't be reset by powering the power feed off for 15 seconds and back on again, then we would suggest contacting a local HVAC service technician (Certificate 3 qualified recommended). Good luck
@@timjohnun4297 U7 indicates a communication error on the outdoor unit, and this fault is generally found on VRV (multi head) type systems. This could mean you have a number of air conditioning indoor units all controlled by one or one group of outdoor condensers. Either way this type of fault would require you to contact your local service agent for inspection and repairs. Often this could be a faulty PCB, faulty power supply to one of the units or a number of other issues. Good luck and we hope you can get it rectified soon.
@@dawsonhc yep, printed circuit on the main board is corroded from being in salt air all the time. Time to replace the unit I think, it’s 9 years old now. Thanks
@@timjohnun4297 we are glad you have found the problem and all the best getting it rectified. Please feel free contact us anytime for advise though our website or social channels: www.dawsonhc.com.au
Hi. What style of remote controller did you get when your old remote was replaced? Is it a genuine Daikin remote or is it an aftermarket alternative remote?
@@dawsonhcyeah my fake one looks the same but is not. It doesn’t have the error code function in it either. It also doesn’t have auto mode for some reason
Hi Tehnik. Apologies for the link not working. We have built a new website since this video was uploaded. We will get the developers to fix up as soon as they can.
To my delight on 32 degree night 40 degree day, turning off the isolation switch then back on worked, thankyou so much Jonathan and may the Lord Jesus Bless You in Everyway 😊
Thank you! I was able to get my AC on thanks to this video which I appreciate very very much
You're welcome!
Thanks mate!! Was able make my aircon work after watching this! :)
Glad I could help!
I hope it continues operating for many years to come.
Cheers
Great video, Thankyou.
You are welcome!
When you say PRESS CANCEL then “KEEP pressing” do you mean keep yr finger holding the down position or multiple presses? I’ve tried both. Holding the cancel switch no error code appears. When I hit cancel continuously every error code appears one after the next. What should I do? Thank you I did do the reset and this worked.
I don’t seem to find any error code it only beeps long with the 00 and it only turns on and opens in the heating mode but doesn’t even blow any air. Do you guys maybe think this is a small bug or a major problem?
If the long beep occurs while '00' is displayed on the screen it means the system has not yet registered a fault.
'00' in the fault menu indicates the fault status as normal.
This doesn't mean there is not an issue with the machine, because if its not working then clearly there is. The system may be low on refrigerant or a fault that is not yet severe enough to register on the control board. We would suggest having the system checked by a qualified cert 3 refrigeration technician.
Feel free to contact our office with any further questions on (02) 6297 4109 or alternatively please keep us posted and let us know how you go.
I have the same issue
@@mmmj1990s yeah i had a power failure at home and a few hours later it still didnt work so i turned the main electric switches off and on
@@luccawouters6158 glad you got it working with a power reset. God luck and fingers crossed it all works well from now on.
@@mmmj1990s I have the same issue . Runs on cooling but won’t run on heating . Just runs the fan at a really low speed . Outdoor unit seems to be running fine . Did you find out what your issue was ?
My daikin is turning on green light but no air coming from it? do you know what this is?
Hi, may I know how do I disable the orange light blinking for WLAN? Thank you.
Thanks to you, I fixed my shit… thanks
i didnt hear any beep when checking mine but I'm having blinking orange and doesn't cool at all.
mine is red blinking without any beep sound,, have you solved the problem?
Hi Tracy. Sorry for the delay in our response. Assuming you have tried to switch the power off for 30 seconds and back on again?
If it is still showing an orange blinking light and the indoor unit, if you have a recent model with WLAN compatibility, the Orange flashing light can indicate it is not connected to the wireless network.
This does not explain why you can't get the controller to beep when you hold the cancel button for 5 seconds. It is possible that the system has a faulty PCB or other component. Can you please confirm what the exact model number is and we will research this further for you?
Thanks
Hi radiologi haji. Please confirm the model of your system and which light is blinking Red? Also please confirm you have also switched off the power for 30 seconds and then back on again?
@@dawsonhc Nvm,, i decided to call the repairman,, but thanks for the answer. :)
2nd press of cancel repeated after 00 long beep. If you cycle through each error code a long beep is the error. If 00 = ok
Title says RED light but the video covers green light flashing. My problem is No green light but the RED light stays on all the time, which I think is stand-by. Any ideas?
Hi Bob. Apologies, yes you are correct, there was a typo on our behalf. To answer your question, may we please have the model number of your system?
Is there a solution when it won't turn on at all?
no flashing lihgt but its beeping alot
I don't get a long beep, I get a double beep on any code with a U in it. Works on fan but not on heat or cool
If there is a double beep when a U appears, it means the "System" is in fault and not specifically the indoor or the outdoor unit. Normally when you continue through the error codes, the long beep confirms the second number is correct. I would suggest trying the alternate method of checking the error codes but you will likely get the same result.
1. Press the following 3 buttons simultaneously - Temp Up, Temp Down, Mode.
00 appears and the first digit willl blink.
2. Push the temp up arrow until you hear 2 short beeps.
3. Push the mode button and the second number will blink.
4. Push the up arrow until you hear a long Beep.
If this still doesn't work and your system can't be reset by powering the power feed off for 15 seconds and back on again, then we would suggest contacting a local HVAC service technician (Certificate 3 qualified recommended).
Good luck
@@dawsonhc Thanks, got U7...
@@timjohnun4297
U7 indicates a communication error on the outdoor unit, and this fault is generally found on VRV (multi head) type systems. This could mean you have a number of air conditioning indoor units all controlled by one or one group of outdoor condensers. Either way this type of fault would require you to contact your local service agent for inspection and repairs. Often this could be a faulty PCB, faulty power supply to one of the units or a number of other issues. Good luck and we hope you can get it rectified soon.
@@dawsonhc yep, printed circuit on the main board is corroded from being in salt air all the time. Time to replace the unit I think, it’s 9 years old now. Thanks
@@timjohnun4297 we are glad you have found the problem and all the best getting it rectified. Please feel free contact us anytime for advise though our website or social channels: www.dawsonhc.com.au
it doesnt work with mine is it because i have a neew remote and lost my original one?
Hi. What style of remote controller did you get when your old remote was replaced? Is it a genuine Daikin remote or is it an aftermarket alternative remote?
@@dawsonhc I dont think its a genuine Daikin remote since there's no logo but the layouts are the same
@@pyar9134 Would you be able to send us a picture of your controller?
@@dawsonhcyeah my fake one looks the same but is not. It doesn’t have the error code function in it either. It also doesn’t have auto mode for some reason
I want to visit your web address. Hoping to find the list code. But: "404 Not Found"
🙄
Hi Tehnik. Apologies for the link not working. We have built a new website since this video was uploaded. We will get the developers to fix up as soon as they can.
@@dawsonhcYes, sir..
Thanks for the quick response.
Good job
olij
R5
A5
Whats the meaning of XO? thats the letter appear in display panel of the remote
XO
U4