Unversal Winch Solenoid WIring

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 พ.ค. 2018
  • Quick demo on how to wire up the cheap universal 500 amp winch solenoids that can be found on Ebay and Amazon. Installed with a Smittybilt XRC8 in this case.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 44

  • @vincenthoeke8811
    @vincenthoeke8811 5 ปีที่แล้ว +3

    Was looking at this last night a bit confused. Thought of You Tube and bam here you are saving me time. Appreciate it bud!

  • @muzzaball
    @muzzaball 2 ปีที่แล้ว

    Mount it; Ground it; Send it - now there is a phrase to live by! Thanks for your help - it worked a treat. Cheers.

  • @Mrfiveohlx
    @Mrfiveohlx 5 ปีที่แล้ว +1

    This video was exactly what I needed to point me in the right direction to get my winch working again. Thank you.

  • @imquattro
    @imquattro 4 ปีที่แล้ว +2

    Thanks! Looked a long time for this help! Good job!

  • @johnr1670
    @johnr1670 4 ปีที่แล้ว +2

    Life saver, I was cussin mad. Then Watched this video and had it working in a few seconds

  • @rossfricke2010
    @rossfricke2010 2 หลายเดือนก่อน

    “mount it, ground it, send it” 👏 good video thanks

  • @jerrybradshaw9879
    @jerrybradshaw9879 3 ปีที่แล้ว +1

    Thanks, you made it simple and easy!!

  • @crwhy
    @crwhy ปีที่แล้ว

    was about this close to launching this solenoid through the fence till your video showed up . Save me a solenoid and a fence panel

  • @gj5464
    @gj5464 11 หลายเดือนก่อน

    Exactly what i was looking for. Thanks

  • @TravisQuiller
    @TravisQuiller 5 ปีที่แล้ว

    Dude, thanks for looking out.

  • @K4K96
    @K4K96 2 ปีที่แล้ว

    Man you saved me a whole lot of head scratching!

  • @anthonytilley1201
    @anthonytilley1201 3 ปีที่แล้ว

    Hi man, great vid, where does the 2 outside wires, the small wires both red on yours) on the solenoid go to?? I’ve just purchased a wireless control winch, thanks!

  • @sterling2665
    @sterling2665 2 ปีที่แล้ว

    Thanks!! Your right. No good instructions. You made it easy!

  • @edwardwilkerson5790
    @edwardwilkerson5790 5 หลายเดือนก่อน

    Thank you it has helped me alot.

  • @gandl2123
    @gandl2123 ปีที่แล้ว

    Well, best video I could find. My long red and short red were in different spots but still the winch won't work. Plug in the remote and nothing. I wonder if there is a reset somewhere or a fuse. This winch is brand spanking new, never used but sat on the trailer it was mounted for years. The plastic zip tie that holds the cable end was still on it. The steel cable was still on the reel like it was new. I just can't get it to work.... Is there a way I can take all cables off all leads and then jump it with jumper cables a certain way to see the winch go in and out to prove or bench test and show the winch works or doesn't? Tks
    ZXR 9000

  • @danielbain595
    @danielbain595 5 ปีที่แล้ว +1

    Where do you put the wireless wires on the solenoid box ?

  • @michaelmurphy5503
    @michaelmurphy5503 4 ปีที่แล้ว +1

    So this one solenoid replaces all 4 factory solenoids in the switch box that come with winch originally

  • @user-yx5qb1kk6c
    @user-yx5qb1kk6c 4 ปีที่แล้ว +1

    Thanks a lot, man.

  • @stjepangrbanovic8029
    @stjepangrbanovic8029 6 ปีที่แล้ว +2

    Thenks!👍

  • @officialWWM
    @officialWWM 2 ปีที่แล้ว

    Legend! Thanks!

  • @wheels.and.wrenches
    @wheels.and.wrenches 5 ปีที่แล้ว

    Does this soleniod come with the winch?

  • @gyffjogofl7676
    @gyffjogofl7676 ปีที่แล้ว

    Perfect! Thanks

  • @jasongrant7804
    @jasongrant7804 4 ปีที่แล้ว

    My Warn controller on a M8000 has 5 wires, not 3, would you know how to wire that?

  • @irahshilling5556
    @irahshilling5556 6 ปีที่แล้ว +1

    does it matter which way round the two posts close to each other are?
    Thanks

    • @iamsuperbleeder
      @iamsuperbleeder  5 ปีที่แล้ว +1

      On the winch motor? It does not. If the two leads are reversed, the winch will just run the opposite way.

  • @rayzdavolume
    @rayzdavolume 2 ปีที่แล้ว

    You saved my day installing a superwinch.. them bastards didht reply for days to help

  • @davtreloar9236
    @davtreloar9236 3 ปีที่แล้ว

    Hello, I know it’s an old vid, but can you give more details about your isolator into the cab. Have you fused the winch power supply. Cheers

    • @iamsuperbleeder
      @iamsuperbleeder  3 ปีที่แล้ว

      It's just a Stinger battery isolator that's usually used for car audio. No fuse in the system currently. When the isolator is energized, it's a direct hookup to the battery via 2 gauge wires.

  • @thatairplaneguy
    @thatairplaneguy 3 ปีที่แล้ว

    Thank you

  • @andrewdial9636
    @andrewdial9636 ปีที่แล้ว

    Thank you soooooo much

  • @mietchan2
    @mietchan2 ปีที่แล้ว

    i plug everything as shown, it works ok, but the relay comes very hot, i unplug it, is it normal, is it dangerous to get un fire?

  • @windage
    @windage 5 ปีที่แล้ว

    after several months, how is that solenoid working out? Just ordered the 500 amp unit from Ebay for $26 shipped

    • @iamsuperbleeder
      @iamsuperbleeder  5 ปีที่แล้ว +1

      So far great! Not a single issue what so ever.

  • @SW-Video
    @SW-Video 4 ปีที่แล้ว

    So how do you turn the winch on (start the motor to wind in/out)?

    • @GusgusA1
      @GusgusA1 4 ปีที่แล้ว

      the outside posts.

    • @GusgusA1
      @GusgusA1 4 ปีที่แล้ว

      according to this vid

  • @poet99999
    @poet99999 5 ปีที่แล้ว +1

    ... my winch only has two posts

  • @MegaRiffraff
    @MegaRiffraff 2 ปีที่แล้ว

    👍🏻👍🏻

  • @thepioneer6178
    @thepioneer6178 3 ปีที่แล้ว

    Shit I thought was gonna use the solenoid as the battery isolator relay.

  • @fagica
    @fagica 2 ปีที่แล้ว

    Useless.