Nice board. I like your dry sound too. I use a clean booster in front of my mxr envelope filter. It gives an extra spice to the sound. Give it a try. You won't regret it.
Thanks for taking your time to watch Bob. I'm glad I replaced my B7K from the Tone Hammer. The Tone Hammer is good don't get me wrong but I found better tone shaping controls with the B7K and the distortion can be blended according to taste. Lovely vids btw! I subbed
@@ChaduPlaysBass I purchase the B7k plugin from NeuralDPS, it's great to play with it. But for my PB I went for the microtubes X to have a good clean compressed tone along distortion. The Cali76 seems to do a pretty good job anyway! Thanks for passing by.
Nice! what do you think of using the compressor before the oc2? Wouldn't it squash your tone if you went for a lower volume octave by using it at the end? I have a similar configuration and basically cant decide if using the compressor before the octaver or at the end of the chain
Very subtle and hardly noticeable tbh, I've tried both but I'm leaning into the compressor end of the chain before the preamp/drive. Always liked octave pedals to be earliest in the chain so they are fed with your cleanest signal.
Thanks so much! I'm using a mono lite pedalboard. Will be posting my updated board. I went simpler with my setup. I'm now running an HX stomp, Doom2 and Octabvre mk3 :) I can do the sounds in this vid with my current one. Excited to upload it soon! Cheers!
Great board, great playing. Exactly the tone i want to hear from an Octaver and also tje Envelope filter rocks. Is this pedal intensed for bass or both guitars and bass?
Do you connect it to a bigger section of board if you want more room? I’m thinking of doing that with my Holeyboard. It hasn’t come in yet so I haven’t even laid everything out in person.
Hello! No, this is the main board that I have and I dont connect it with other boards. I do have a micro board as grab and go when I have sets that are not heavy effects dependent. Just a tuner and the spectra drive. But this one is my main rig
Hello my friend, I'm using the Mono lite pedalboard. It's 14" x 5.7" size. Love the look and form factor of it. ike it better than my PT nano which I sold
Hi bro, v1 ung meron ako. Got it as a gift kasi ako nagdesign nung pedal at rebrand ng logo ni ElectricNim. Toneshaping oks naman sya pero hindi ko makuha ung timpla na gusto ko kaya di ko masyado nagamit. May room for improvement pa. Not sure sa mga bagong version, hope mas oks ung curcuit nya. Narealize ko since importante saken tone shaping ng preamp pedal, mas maigi na pagipunan ko ung mga matagal na sa market and industry. Hope this helps
@@ChaduPlaysBass bro, salamat sa pagreply. Im seriously considering getting the v3 e pero hesitant pa rin nga kasi di ko pa sya masyado nakikita na gamit ng karamihan. Planning to go ampless na kasi kaya naghahanap ako ng budget-friendly options. Salamat sa honesty bro. Sick artwork sa pedal btw at syempre solid playing as always.
You could use that board vertically and flip that last pedal at this point! Very good use of space man
Great video! I like your setup. All the pedals sound 🔥, especially the Proton envelope filter.
VERY IMPRESSIVE!
Nice board. I like your dry sound too. I use a clean booster in front of my mxr envelope filter. It gives an extra spice to the sound. Give it a try. You won't regret it.
Aw thanks! I've an updated board that I will be demoing soon. My board now only has the HX stomp, Doom2 and Octabvre MkIII which I love :)
That is a sweet rig. Love this demo and well done.
Hey Adam! Thanks so much for the kind words. Means alot! Love your vids!
This is an ideal set up, we'll done bruv
Thanks man! I've replaced the OC-2 now with the C4 synth :)
Very impressive and compact. Might try something like this myself since I happen to own the same pedals... 😂
Great variety of tones, the octaver+wah is gorgeous, but the B7k tone wins ^^
Thanks for taking your time to watch Bob. I'm glad I replaced my B7K from the Tone Hammer. The Tone Hammer is good don't get me wrong but I found better tone shaping controls with the B7K and the distortion can be blended according to taste. Lovely vids btw! I subbed
@@ChaduPlaysBass I purchase the B7k plugin from NeuralDPS, it's great to play with it. But for my PB I went for the microtubes X to have a good clean compressed tone along distortion.
The Cali76 seems to do a pretty good job anyway!
Thanks for passing by.
Nice! what do you think of using the compressor before the oc2? Wouldn't it squash your tone if you went for a lower volume octave by using it at the end? I have a similar configuration and basically cant decide if using the compressor before the octaver or at the end of the chain
Very subtle and hardly noticeable tbh, I've tried both but I'm leaning into the compressor end of the chain before the preamp/drive. Always liked octave pedals to be earliest in the chain so they are fed with your cleanest signal.
Nice and compact and I like your choice of pedals! Just wondering. What model pedalboard did you use?
Thanks so much! I'm using a mono lite pedalboard.
Will be posting my updated board. I went simpler with my setup. I'm now running an HX stomp, Doom2 and Octabvre mk3 :) I can do the sounds in this vid with my current one. Excited to upload it soon! Cheers!
Great board, great playing. Exactly the tone i want to hear from an Octaver and also tje Envelope filter rocks. Is this pedal intensed for bass or both guitars and bass?
Thanks so much! This setup is intended for my bass rig. Cheers!
really sweet tones! What was the bass?
Thanks man! I was using my Fodera Monarch but in passive mode. Nice vids btw! I subbed!
What is the pedal's name with a Bull's head on it?
It's a Bass Preamp/DI made in the Philippines called ElectricNim
Very nice tone! What Bass are you playing?
Thank you! Glad you like it. I'm using my Fodera monarch. But only in passive mode
Do you connect it to a bigger section of board if you want more room? I’m thinking of doing that with my Holeyboard. It hasn’t come in yet so I haven’t even laid everything out in person.
Hello! No, this is the main board that I have and I dont connect it with other boards.
I do have a micro board as grab and go when I have sets that are not heavy effects dependent. Just a tuner and the spectra drive.
But this one is my main rig
Hello friend! What are the dimensions of your board?
Hello my friend, I'm using the Mono lite pedalboard. It's 14" x 5.7" size. Love the look and form factor of it. ike it better than my PT nano which I sold
Bro, ano feedback mo sa karah v3?
Hi bro, v1 ung meron ako. Got it as a gift kasi ako nagdesign nung pedal at rebrand ng logo ni ElectricNim.
Toneshaping oks naman sya pero hindi ko makuha ung timpla na gusto ko kaya di ko masyado nagamit. May room for improvement pa. Not sure sa mga bagong version, hope mas oks ung curcuit nya.
Narealize ko since importante saken tone shaping ng preamp pedal, mas maigi na pagipunan ko ung mga matagal na sa market and industry. Hope this helps
@@ChaduPlaysBass bro, salamat sa pagreply. Im seriously considering getting the v3 e pero hesitant pa rin nga kasi di ko pa sya masyado nakikita na gamit ng karamihan. Planning to go ampless na kasi kaya naghahanap ako ng budget-friendly options. Salamat sa honesty bro. Sick artwork sa pedal btw at syempre solid playing as always.
Bicentennial!!!
Love that bassline!
Очень неудобная расстановка. Видно. И чувствуется.