These actually look really good inside compared to budget speakers, lots of mdf bracing inside. You don't see that level of bracing often usually it are just some sticks glued in some places.
Could you give us a follow up with the crossover? I'm asking because I'm interested whether the components are good or could be improved using higher quality stuff.
Дааа как то внутренности данной акустики расстроили, мне одному показалось что для своей цены очень дешево смотрятьчя хотя бы танюсенькие проводочки к динамикам, и вот этот след от ожога магнитов как то странно смотриться на заглушке, хочеться верить что это отличная окустика, но при разборке простенько, дешево смотриться. Отпадает желание покупать.
Thank you for your show , could you please tell me how to remove ring around center driver , what kind of tool do you use to remove ring of center driver . Because I will follow you for change cable inside my KEF R500 thank you
@@happyrelax5059 im late here, but it reaaaly helps if you get all 4 nails (nails from your fingers, not metal nails, those will definitely destroy your speaker lol) under there to you dont accidentally break the plastic and that your nails dont bend
thanks for deep unboxing, i'm surprised to see that they screwede those woofers on to 5mm standard mdf, it's so thing. Check some Magnat speakers, their drivers are mounted onto 45mm specially hardened brick like material..Germans are way ahead of these craps.
In the video I saw a blue and black and a purple and black speaker wires going from the uni q driver out behind the cotton, and the red and black speaker wires are for the woofers, when I took the binding post cover off the back of the speaker I only saw the red and black wires going to the crossover at the base of the speaker, and the blue and black run down and go directly to the binding posts, where does the purple and black wires go? I want to remove the speaker but idk if it's difficult to remove the outer beauty ring it seems tight to the speaker and can't get anything in between to remove it away from the speaker without damaging the speaker by putting any dings on the woofer. Any suggestions on removing the ring safely around the uni q array driver thanks?
What are the rings around all drivers hiding all the screws and stuff made of? They certainly looks like cheap plastic...? :/ Any issues with allignment of these / them staying in place while playing music?
Huge Kef fan here but these look pretty cheaply Made, and in Canada anyways the lowest you can get these for is $6k a pair. I am Not seeing 6k here. The internals look on par quality wise with iq7’s I have opened up which are good speakers but kef’s entry level priced 6 times lower.
Exactly, it's ridiculous the build quality they put on this speaker and the asking price. They can fool somebody else i was thinking about them, not after seeing what's inside, plastic ? Really ? For 6k? No thank you
@@TexasCorgiGun lol clearly you have no idea how much goods must be marked up to sell on a mass scale. For better build quality try a small builder, and take your chances...
I would love to see what is used in the xovers and the cost of components. I have seen the their reference speakers use a charity cap MR4 U7H capacitor that sells for £20, the resistors costs a few pounds each and they are speakers that start at £10,000. I would to see what a xover upgrade would do to the R11.
Its funny how people spend hundereds and sometimes thousands of dollars on cables, and inside so called reference speakers you find thin and cheap crap cables at at total cost of 2 bucks tops ...
All but the reference line made in China under strict assembly guide lines, the meta ..like my reference 5 hand made in Kent England meta. A real loudspeaker company design from drivers to cabinet KEF. One of the best in the world Real speaker maker's 😊
Loved this video. Thank you. Funny thing. Some random searchers for speaker wire led me to this video. What gauge speaker wire is that in side the speaker. And is it the same type for the different drivers? Also what would you folks normally recommend for inwall runs of about 10m and less?
Good improvement of components tbh over the old R series (r700 r900), those had really really crap components inside. This is actually ok, for this price range. Sound should be better also. Did you get a chance to compare them sound wise?
I am sick of these video that only play music instead of what the person speaking and saying what they are is doing and why.. The same when upgrading crossovers on B&W 702 speakers. Can't you people speak. It makes the video boring.
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
You do a great job and thank you for that. Maybe next time you can show us the crossover. All the best
Is it possible to update this video to add a shot of the crossover. It would be nice to see what kind of components are used. Thanks!
Snap! Somewhat ruins the lustre of these lovely speakers when you see inside! Great video! :D X
These actually look really good inside compared to budget speakers, lots of mdf bracing inside. You don't see that level of bracing often usually it are just some sticks glued in some places.
True! Very nicely built!
Thanks for sharing your skills! This way to take out these type of speakers answer some very important questions to me!
why didn't he show the crossover after going to all that work taking everything apart?
Now that's unboxing, well done sir.
How did you remove round thing of uni-q driver?
Great Video Thx it is allways verry interesting what LS Cable used internal ;-)
The rings around the speakers are plastic, right?
is it possible to change the copper colored conus of the speakers mine got dents in it 😢
Probably not change, but repaint...
Could you give us a follow up with the crossover? I'm asking because I'm interested whether the components are good or could be improved using higher quality stuff.
Дааа как то внутренности данной акустики расстроили, мне одному показалось что для своей цены очень дешево смотрятьчя хотя бы танюсенькие проводочки к динамикам, и вот этот след от ожога магнитов как то странно смотриться на заглушке, хочеться верить что это отличная окустика, но при разборке простенько, дешево смотриться. Отпадает желание покупать.
Thank you for your show , could you please tell me how to remove ring around center driver , what kind of tool do you use to remove ring of center driver . Because I will follow you for change cable inside my KEF R500 thank you
Just use your fingers
@@hxosplus Oh really ! I use my finger but I could not remove it because my finger will press the driver long deep I worry about the damaged to driver
@@happyrelax5059 From inside the ring
@@happyrelax5059 im late here, but it reaaaly helps if you get all 4 nails (nails from your fingers, not metal nails, those will definitely destroy your speaker lol) under there to you dont accidentally break the plastic and that your nails dont bend
These speakers are not a small price, but inside I do not see anything worth the money. It is interesting to see the crossovers of these speakers.
Look at speakers from other manufacturers in the same price range, and you will realize these are kind of ok. DYI is the way to go.
Most of you are idjuts and don't understand what yer looking at.
thanks for deep unboxing, i'm surprised to see that they screwede those woofers on to 5mm standard mdf, it's so thing. Check some Magnat speakers, their drivers are mounted onto 45mm specially hardened brick like material..Germans are way ahead of these craps.
Is there two crossovers one behind the uni q driver and the other at the base of the speaker?
I think just one
In the video I saw a blue and black and a purple and black speaker wires going from the uni q driver out behind the cotton, and the red and black speaker wires are for the woofers, when I took the binding post cover off the back of the speaker I only saw the red and black wires going to the crossover at the base of the speaker, and the blue and black run down and go directly to the binding posts, where does the purple and black wires go? I want to remove the speaker but idk if it's difficult to remove the outer beauty ring it seems tight to the speaker and can't get anything in between to remove it away from the speaker without damaging the speaker by putting any dings on the woofer. Any suggestions on removing the ring safely around the uni q array driver thanks?
Very nice!
Congratulation!
Thanks
I dont speak very well english, but i put my brother to write...very very good
Какой размер звуковой катушки и магнита?
hi
kef r3 are the same inside as this r11 ?
thank you
Yes, it's the same series
What are the rings around all drivers hiding all the screws and stuff made of? They certainly looks like cheap plastic...? :/
Any issues with allignment of these / them staying in place while playing music?
All loudspeakers are having these kind of rings.
Not very impressed with the internals..
great job thanks but i think KEF won't do the same!
Huge Kef fan here but these look pretty cheaply
Made, and in Canada anyways the lowest you can get these for is $6k a pair. I am
Not seeing 6k here. The internals look on par quality wise with iq7’s I have opened up which are good speakers but kef’s entry level priced 6 times lower.
Exactly, it's ridiculous the build quality they put on this speaker and the asking price. They can fool somebody else i was thinking about them, not after seeing what's inside, plastic ? Really ? For 6k? No thank you
@@TexasCorgiGun lol clearly you have no idea how much goods must be marked up to sell on a mass scale. For better build quality try a small builder, and take your chances...
What you want is typical British DIY.
Shame the Japanese don't do many speakers.
I would love to see what is used in the xovers and the cost of components. I have seen the their reference speakers use a charity cap MR4 U7H capacitor that sells for £20, the resistors costs a few pounds each and they are speakers that start at £10,000. I would to see what a xover upgrade would do to the R11.
Its funny how people spend hundereds and sometimes thousands of dollars on cables, and inside so called reference speakers you find thin and cheap crap cables at at total cost of 2 bucks tops ...
I wash expecting fish and chips newspaper inside.
All but the reference line made in China under strict assembly guide lines, the meta ..like my reference 5 hand made in Kent England meta. A real loudspeaker company design from drivers to cabinet KEF. One of the best in the world Real speaker maker's 😊
Loved this video. Thank you. Funny thing. Some random searchers for speaker wire led me to this video. What gauge speaker wire is that in side the speaker. And is it the same type for the different drivers? Also what would you folks normally recommend for inwall runs of about 10m and less?
Ι don't know the gauge for this speaker. But, normally the manufactures are using different gauge for woofers and for twitters.
10m is OK.
Please ,please, can anyone tell me how would these compare to the focal 948 ?
I would guess these would be a bit better
Good improvement of components tbh over the old R series (r700 r900), those had really really crap components inside. This is actually ok, for this price range. Sound should be better also. Did you get a chance to compare them sound wise?
What was crap about the old r series
Amazing video
very nice video
Very cheap speaker cables inside for the price
indeed it is laughable with the poor connections and some will pay for esoteric speaker cables which cost an eye and a leg....!
i like Monitor Audio's Pureflow Silver plated OFC copper internal cabling
That's because wire is wire and all the clowns swearing by pricy pipes for wire runs are nothing more than corporate sheep 🤷♂️...
It just proves that you don't need expensive wires for good sound.
Because it doesn't matter.
Dining in a Michelin star restaurant only to discover what goes on in the kitchen. Not cool KEF!
What’s not cool? It is a very good build, lots of bracing, good dampening and great drivers
@@LarsTimme he doesnt understand economics of speaker building. of course price cant be less than 10x materials. But kef has very good engineering
Δικαιολογούν την τιμή τους κατά τη γνώμη σας;
Εξαιρετικά, διαβάστε την δοκιμή στο περιοδικό
It is British DIY with mafia WhatHiFi magazine.
I am sick of these video that only play music instead of what the person speaking and saying what they are is doing and why.. The same when upgrading crossovers on B&W 702 speakers. Can't you people speak. It makes the video boring.
mah un diffusore da 5000 mila euro con dei cavi rosso neri che non si usano nemmeno piu in in impianto auto
Why the music? it's trash
I guess no copyrights ?
Cheap kfc wire..cheap tweeter..beefy woofers..looks like $370 worth of parts.. Dammit. DIY this speaker.
They all do the same. Even more expensive speakers today. DYI ftw! 🔊
5k and you get this piece of shit??? Something with this poor build quality it's worth no more than 3k. Shame on Kef.