You could use fashion strips (double-sided, dermatologically tested tape) in combination with FFP3 NR masks by placing the tape across the nose section. Same recommendations as in this video apply (clean shave for proper seal, fit check, preferably also tensioning of the mask loops behind the head with hooks). This should provide an accessible way to achieve high filtration and best-effort protection in most places of the world. Stay safe!
Hi, can you tell me please, if the mask 6500Ql mask protects the same as the one that has not QL the regular 6500? The only difference in protection is the easy removal or are other difference in-protection? Thanks
Hi there, thank you for the question. Our product experts will be best suited to answer this query about 3M respirators, therefore, please visit s.3m.com/vb7yy4 and contact the team in the UK directly and they will assist you further. Have a good day!
Any mask of this type will be uncomfortable after 30 mins or so, afterall these masks designed primarily for safety purposes not for comfort. your face size plays an important role, you might experience that after using multiple series.
You're going to need to refer to the niosh spreadsheet included with your filters and ensure that filter is meant for the chemical you're still smelling, if you're smelling fumes it's likely you either don't have a good seal on your face and/or you're not using a filter designed to filter out or neutralize that chemical.
yes. you can use 3m series 6000 mask, and use filters 3m #6035 or #6038 also you can use a combi filter: by using 3m product #6055 or #6059 with #5935 and filtercover #501 - I recommend looking for the mask with #6035 or #6038, those are optimal for the corona situation. but all of this is very expensive now, people price gauging badly.
for the 3m 6200 mask the manual says that alcohol can be used. I expect that for the whole series. I cover the whole mask in 80% 2-propan-ol solution by using a pump-sprayer. only bit I would be careful are the outside seals where you put the filter, those dont seem to like any fluids.
The most convenient mask on the Market today. I used this mask during the entire SarsCovi2 (Covid-19) Pandemic cycle. Still healthy with no infections.
general rule is "no"; however, I am not a daily shaver-more weekly or so--it will likely still seal well, although it will never seal better than if you had no facial hair. If I ever have to wear a full-face for work with chemicals (vapors), I would say definitely no facial hair. For dust...meh. If it passes the so-called fit test, I will use it with facial hair.
There needs to be some guidance given on size and how to assertain if small, medium or large is required. Just selling this item without this information is very unprofessional 3M.
@@xattr8403 But if i just wear the mask without any filters it's still protecting my nose and mouth! Plus i wanted to buy it from online but they're only selling it without the filters! If i want the filters i have to buy it from somewhere else!
@@Backstreets247 from what would it protect you?! without filters its pointless, you could as well just wrap a scarf around your head. and why do you expect the mask to be bundled with filters, there are hundrets of different filters for these masks all for different scenarios. makes no sense to bundle it with a specific filter. and btw you are a bit late...these masks and filters go for ridiculous prices now...
How can i choose the rigth measure of mask? L or M
You have to be fit tested
Is this advisable to use for covid patient encounter? Cause we shouldn’t be touching our mask in front right? contamination?
You could use fashion strips (double-sided, dermatologically tested tape) in combination with FFP3 NR masks by placing the tape across the nose section. Same recommendations as in this video apply (clean shave for proper seal, fit check, preferably also tensioning of the mask loops behind the head with hooks). This should provide an accessible way to achieve high filtration and best-effort protection in most places of the world. Stay safe!
Hi, can you tell me please, if the mask 6500Ql mask protects the same as the one that has not QL the regular 6500? The only difference in protection is the easy removal or are other difference in-protection? Thanks
Hi there, thank you for the question. Our product experts will be best suited to answer this query about 3M respirators, therefore, please visit s.3m.com/vb7yy4 and contact the team in the UK directly and they will assist you further.
Have a good day!
Is ths good for corona virus for heathcare ? And filter7093 is it good ?
3M Filter 6035 is safe for Covid 19 Shalam 👍🏼
Yes 7500 with 6035 p3r is what they are using in hospitals on sky news
Thanks found that to be very helpful in making sure I had it on right.
7500 more comfortable or this one?
7500 is much comfortable.
@@sarvgyansampurna Aren't they both made of the soft silicone? I thought the only difference was the drop down latch.
Nope, 7500 is having much soft material, trust me, 1st hand experience
@@sarvgyansampurna I have the 7500, it's not awful, bit uncomfortable after 45 minutes or so for me. Thanks for the info.
Any mask of this type will be uncomfortable after 30 mins or so, afterall these masks designed primarily for safety purposes not for comfort.
your face size plays an important role, you might experience that after using multiple series.
Should you still be able to smell fumes with this respirator and a 6035 filter?
You're going to need to refer to the niosh spreadsheet included with your filters and ensure that filter is meant for the chemical you're still smelling, if you're smelling fumes it's likely you either don't have a good seal on your face and/or you're not using a filter designed to filter out or neutralize that chemical.
Yes,this is a particulate filter only.
There are cartridges with activated carbon they work for most chemical fumes.
Is this recommended for corona virus?
yes. you can use 3m series 6000 mask, and use filters 3m #6035 or #6038 also you can use a combi filter: by using 3m product #6055 or #6059 with #5935 and filtercover #501 - I recommend looking for the mask with #6035 or #6038, those are optimal for the corona situation. but all of this is very expensive now, people price gauging badly.
YES!
@@xattr8403 6502ql recommend for covid virus ?
@@malikajamal6369 yes of course, thats good. most important is the filters: 3m #6035 or #6038
@@xattr8403 thankyou somuch , i use 7093 filter , is it ok ?
Can this respirator be cleaned with alcohol wipes? Or will that cause damage?
Thanks
dont't use alcohol....
The surface could be wipe cleaned with alcohol，you don''t need to clean inside. The virus won't break through the glassfibers.
@@sichengliu35 using 3M 504
for the 3m 6200 mask the manual says that alcohol can be used. I expect that for the whole series. I cover the whole mask in 80% 2-propan-ol solution by using a pump-sprayer. only bit I would be careful are the outside seals where you put the filter, those dont seem to like any fluids.
Wish the filters were more compact.
theandroids they have to be large to not restrict airflow for breathing...
Thanks, very helpfull
what does it indicates if i smell through half respirator
The filter needs to be replaced or you didn't put the respirator on correctly
Does this work for resin works
That depends on the filter you're using
Os administradores hospitalares de portugal deviam ver isto ....
Deviam investir em respiradores deste género em vez de gastarem rios de dinheiro em bateladas de máscaras descartáveis.
How can we buy this
How much po with filter
Aníbal Lecter 😊
Are the filters themselves in anyway toxic?
No they aren't,they are 100% safe if they are in good condition,and dont try to open them
The most convenient mask on the Market today. I used this mask during the entire SarsCovi2 (Covid-19) Pandemic cycle. Still healthy with no infections.
so i cant use this as dust mask with a beard?
need vaseline
@@jesjens what u mean by that?
general rule is "no"; however, I am not a daily shaver-more weekly or so--it will likely still seal well, although it will never seal better than if you had no facial hair. If I ever have to wear a full-face for work with chemicals (vapors), I would say definitely no facial hair. For dust...meh. If it passes the so-called fit test, I will use it with facial hair.
No way,can get hooded masks for beards bro.Google it yeah.
Dzieło sztuki BHP HSE
3:00 look cool :)
There needs to be some guidance given on size and how to assertain if small, medium or large is required. Just selling this item without this information is very unprofessional 3M.
Ok im buying this. its expensive as hell in Sweden but i dont give a fuck. i want protection against corona NOW
I've got a beard. So i'm fucked?
Can we use it without the filters?
why would you do that? lol without any filter attached to it you could as well just take it off.
@@xattr8403 But if i just wear the mask without any filters it's still protecting my nose and mouth! Plus i wanted to buy it from online but they're only selling it without the filters! If i want the filters i have to buy it from somewhere else!
@@Backstreets247 from what would it protect you?! without filters its pointless, you could as well just wrap a scarf around your head. and why do you expect the mask to be bundled with filters, there are hundrets of different filters for these masks all for different scenarios. makes no sense to bundle it with a specific filter. and btw you are a bit late...these masks and filters go for ridiculous prices now...
um No!!!
Why that?
Get a faceshield
如果我想要360中碼嘅豬嘴 需要幾多錢
係3600先啱
都對唔住係3500
OMG! who is here for COVID 19? someone predicted it
3m turbo
Out of stock, Out of stock, Out of stock, Out of stock, Out of stock, Out of stock, Out of stock, Out of stock, Out of stock,
ebay in stock ebay in stock ebay in stock ebay in stock ebay in stock ebay in stock ebay in stock ebay in stock ebay in stock
Boycott 3m!
😄😄
Why that?
Was someone pissed again?